1/2 to 1-1/2 in Pneumatic Finishing Stapler

Article#37815105 Model#N3804AB3 Format1/2-1 1/2"
1/2 to 1-1/2 in Pneumatic Finishing Stapler
 

Description

Air pressure 70-120PSI. Light weight and compact for easy use in tight spaces. New selective actuation switch lets the user easily select bump fire or sequential fire modes. 360° Adjustable exhaust, can be directed away from user in any direction. High-capacity magazine, holds up to 125 staples for maximum efficiency. Tool-less, easy-to-clear nose, for quick and simple staple extraction. Tool-less depth of drive. Small no-mar tip included to prevent work surface damage. Elastomer grip adds comfort and security. Includes: Safety glasses and case.

You may also like

BOSTITCH
Nailer - 2 1/2-in. Brad Nailer
Format 16GAx2 1/2"
Article #0277087
Model #FN1664K
★★★★★ ★★★★★
3.7
(6)
BOSTITCH
Aluminium Pneumatic Nailer Yellow
Format 1/[email protected]"x23GA
Article #0277085
Model #HP118K
★★★★★ ★★★★★
4
(6)
HITACHI
2-in. Pneumatic Finishing Nailer
Format 2"x18GA
Article #37815026
Model #NT50AE2
★★★★★ ★★★★★
4.5
(389)
MAKITA
Pneumatic Roofing Nailer - 3/4 " to 1 3/4"
Article #11975432
Model #AN454
★★★★★ ★★★★★
0
(0)
SENCO
Pneumatic Stapler
Format 16-17GA
Article #10595002
Model #7B0001N
★★★★★ ★★★★★
0
(0)
BOSTITCH
Stapler - 1 1/2-In. Brad Stapler
Format 18GAx1 1/2"
Article #0277088
Model #SX1838K
★★★★★ ★★★★★
4.2
(35)
SENCO
Coil Roofing Nailer - Plastic/Aluminum - 3/4-1 3/4"
Format 3/4-1 3/4"
Article #10595040
Model #8V0001N
★★★★★ ★★★★★
0
(0)
PASLODE
Finishing Nailer
Format 5/8 TO 2"x18GA
Article #2293071
Model #901000
★★★★★ ★★★★★
0
(0)
FORESTO
Pneumatic Finishing Stapler - 18 GA - 3/8"
Format 3/8"x18GA
Article #03395107
Model #FO3 M32
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Pneumatic Brad Nailer Kit - 5/8" - 2"
Format 5/8-2"x18GA
Article #73455187
Model #CHN10299AV
★★★★★ ★★★★★
0
(0)
PASLODE
Nailer / Stapler
Format 18GA
Article #22935197
Model #P18-FS200
★★★★★ ★★★★★
2
(1)
ARROW
Pneumatic Staple 120 PSI - T50
Article #00125088
Model #PT50
★★★★★ ★★★★★
4.6
(702)
CARPENTER AIR TOOLS
Carpenter Framing Nailer - 21° - Full Round Head Nails
Article #330624719
Model #CFRN9021
★★★★★ ★★★★★
0
(0)
BOSTITCH
2-in-1 Pneumatic Flooring Tool - Staples/Nails 1 1/2"-2"
Article #00276202
Model #BTFP12569
★★★★★ ★★★★★
4.4
(62)
CAMPBELL HAUSFELD
2-in-1 Pneumatic Flooring Nailer/Stapler- 1.5"- 2"
Format 1 1/2-2"
Article #73455188
Model #CHN50399AV
★★★★★ ★★★★★
0
(0)
MAKITA
Finishing Stapler - 1" to 2" - Crown Staples - 16-Gauge
Format 1-2"x16GA
Article #11975380
Model #AT2550A
★★★★★ ★★★★★
0
(0)

Technical specifications

Air Inlet :1/4 in Type :Finishing Magazine Angle :Straight Gauge :18 Air Flow :0.040 (cu.ft./cycle at 100 PSI) Magazine Capacity :125 Staples Depth Setting :Keyless Pressure :70 - 120 PSI Fastener Length :1/2 in - 1-1/2 in Included :Safety Glasses, Case and No-mar Tip Warranty :5-Year
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
1/2 to 1-1/2 in Pneumatic Finishing Stapler is rated 4.6 out of 5 by 103.
Rated 4 out of 5 by from Decent Staple Gun I bought the Hitachi for the reasonable price.I"ve put up around 500 privacy pickets at 15 staples a picket.Gun has worked great.Contractors that complain about the less exspensive and not as durable products need to grasp the fact that you get what you pay for.If you want to throw your tools around not maintanence them needs to buy the higher end products.I"ve been on both ends.For someone doing home remodiling and projects this gun is a good choice
Date published: 2011-04-11
Rated 4 out of 5 by from Overall a good tool I bought this stapler to install flooring underlayment. The job is finished now, and I'm just about completely satisfied with the stapler. Over 2,000 staples were installed with NO JAMS! The weight/strength combination was fine for shooting 7/8 inch staples into three different substrate materials: hardwood flooring, treated plywood and untreated plywood. The only thing tricky was adjusting the air-pressure/depth adjustment settings to get the best penetration without shooting the staple all the way through the 1/4 inch plywood underlayment. Occasionally a staple would not seat all the way into the underlayment, but this was likely a result of varying conditions in the substrate (knots, nails, etc.) Other than the touchy penetration setting this tool would rate a five star. (The compressor was a Porter Cable 6 gallon. Its regulator setting is also touchy!)
Date published: 2016-12-24
Rated 5 out of 5 by from Good Stapler I recently installed insulation in the walls of the house. I used this stapler to staple the bats to the studs and cover with plastic. I used approximately 7000 staples. Two different brands of staples. It only jammed one time. Glad to have it. It will be good to use for trim.
Date published: 2014-09-04
Rated 4 out of 5 by from stapler i would not recomend this product to a freind simply becouse i like ridged better. i bought this gun couse it was cheap and i needed it right then. my other gun(ridged) was on another job. simply said, it works. so far i have run more then 5,000 staples. its jammed a few times but no big deal. it clears easy. YOU CAN ADJUST THE DEPTH CONTROL. the last reviewer stated that it wouldnt adjust to flush, but it does. takes a bit of patiance and about 75 staples to get it right. this gun would be great for the homeowner. doesnt seem like its built well enough to be thrown around, dropped, stepped on and so on by rugged contractors. tho it does have a continous fire wich i didnt expect(alot faster when laying 1/4" luon subfloor, paneling and ceiling tiles)
Date published: 2011-03-26
Rated 5 out of 5 by from Very impressive stapler I have used several brands of staplers over the years. This stapler has impressed me a lot over the past year. I initially bought it because my old bostitch finally let me down, and I am glad that it did. I have no problems adjusting the staples to the depth I need, whether I am hanging screen on porches or anchoring soffits. I usually run it at 100 psi and only on the softest of woods have I had to back down to 80 psi. I have used anything from 1/2" staples to 1-1/2" staples without any problems. I do have a jam every once in a while, just like any other pneumatic tool, but it is extremely easy to clear the jam and get back to work. Even my Father, a man who is firmly rooted in one specific brand (it starts with De...) has been extremely impressed and even added a bit of green to his black and yellow mix. It has taken many tumbles off a 16ft extension ladder and has never balked once. It is light weight but tough.
Date published: 2012-02-09
Rated 5 out of 5 by from great tool great price This is a very lightweight strong stapler. I've put it to work with no complaints!
Date published: 2012-12-25
Rated 5 out of 5 by from Excellent stapler for the money. We use this every day and it works great, just adding a second one.
Date published: 2013-04-01
Rated 4 out of 5 by from This product is great for contractors who need to rapid fire staples . I had a cheaper stapler and replaced it with this one. My main reason was the rapid fire which is amazing. As fast as you can hit stapler to wood its in, you dont have to keep pulling the trigger. It always sinks staples far enough.. However my buggest complaint is, I bought hitachi staples and for some reason I cant explain the stapler will not take 2 clips of staples. I literally had to load stapler by breaking a few staples off each time. I would figure hitachi would either make staples to fit gun better, or make gun bigger to fit the staples. Overall im happy and would recommend.
Date published: 2013-09-18
  • y_2019, m_7, d_18, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_103
  • loc_en_CA, sid_37815105, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Frequently bought together

DEGIL SAFETY
Safety glasses
Article #86575158
Model #7050500
★★★★★ ★★★★★
0
(0)
DEGIL SAFETY
Safety Flex Goggle
Article #8657090
Model #7052000
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Tire Inflator with Gauge
Format 10-100LB
Article #73455195
Model #MP600000AV
★★★★★ ★★★★★
1
(1)
CAMPBELL HAUSFELD
Vertical Air Compressor - 60-Gallon - 3.7 HP
Format 60GAx3.7HP
Article #73455238
Model #XC602100
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Vertical Compressor - 80 Gal. - 5 HP
Format 80GAx5HP
Article #73455239
Model #XC802100
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
20-Piece Air Compressor Accessory Kit
Format 20PC
Article #73455233
Model #MP604103AV
★★★★★ ★★★★★
0
(0)
RCR
"Contractor" Air Hose
Format 3/8"x50'
Article #0412763
Model #HAC3850
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
"Quiet Series" Electric Air Compressor - 8 Gal. - 1.0 HP
Format 8GAx1HP
Article #73455217
Model #DC080500
★★★★★ ★★★★★
5
(1)
RCR
"Contractor" Air Hose
Format 3/8"x25'
Article #0412762
Model #HAC3825
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
17-Accessory Set
Format 17PC
Article #7345027
Model #MP284701AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Pistol Grip Blow Gun
Article #7345042
Model #MP514300AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Coupler and Plug Set
Format 4PC
Article #7345028
Model #MP211900AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Ball Foot Chuck - 1/4" Female NPT
Format 1/4"
Article #73455205
Model #MP323300AV
★★★★★ ★★★★★
0
(0)

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store