Halloween DecorInflatable DecorationsLighting and Special EffectsIndoor DecorationsOutdoor Decorations

Compact Table Saw - 10" - 15 A

Article#0027593 Model#DW745 Format10"x15A
Compact Table Saw - 10" - 15 A
 

Description

This table saw's 15-amp motor delivers high performance power and torque for hardwood and stacked cuts. Optimized footprints make it the lightest saw with a capacity of more than 20% higher than other saws of its class. Rubber feet resist impact and grip smooth surfaces for convenient adjustability on uneven surfaces. At 45 lb, this table saw is the lightest saw by more than 25% with its capacity. The rack and pinion fence design delivers consistent fence to blade parallelism, while the telescoping fence rails retract to create a small, portable package. Its metal roll cage base is designed to withstand drops, unsecured transportation and job site use that would ruin plastic bases.

You may also like

TRITON TOOLS
Triton Tools Multi-Stand - 31.5-in x 37-in - Orange
Article #330668645
Model #MSA200
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Tracks and Connectors Set - 27.5-in - 2 pcs
Article #330668648
Model #TTSTP
★★★★★ ★★★★★
0
(0)
BOSCH
Worksite Table Saw with Wheeled Stand - 10"
Format 10"x15AM
Article #19836270
Model #4100-10
★★★★★ ★★★★★
4.8
(37)
BOSCH
Portable Table Saw - 10" -15 A
Format 10"x15AM
Article #19835506
Model #GTS1031
★★★★★ ★★★★★
3.4
(12)
TRITON TOOLS
Triton Tools T-Square Guide - White
Article #330668649
Model #TTSTS
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Left Side Support for Table Saw
Article #330009253
Model #TS1008
★★★★★ ★★★★★
4.3
(3)
METABO HPT
Metabo HPT 36 V/DC Cordless Table Saw - 10''
Format 10"x36V
Article #37815211
Model #C3610DRJQ4M
★★★★★ ★★★★★
4.7
(3)
TRITON TOOLS
Triton Tools Canvas Bag for 1500 mm - 59-in - Black
Article #330668657
Model #TTSCB1500
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Router Track Adaptor
Article #330668684
Model #TRTA001
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Out Feed Support Assembly
Article #330009254
Model #TS1016
★★★★★ ★★★★★
4.7
(3)
TRITON TOOLS
Triton Tools Table Saw Module - 26-in x 16.5-in - Orange/Black
Article #330668640
Model #TWX7CS001
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Table Saw Stand
Article #330009252
Model #TS2100
★★★★★ ★★★★★
5
(1)
TRITON TOOLS
Triton Tools Canvas Bag for 700 mm Track - 27.5-in - Black
Article #330668658
Model #TTSCB700
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Table Saw Zero Clearance or Dado Insert
Article #330009250
Model #TS1006
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Angle Guide - 55° - White
Article #330668656
Model #TTSAG
★★★★★ ★★★★★
0
(0)
METABO HPT
Table Saw with Rolling Stand - 10'' - 15 AM
Format 10"x15A
Article #37815184
Model #C10RJM
★★★★★ ★★★★★
4.1
(73)

Technical specifications

Revolutions per Minute :3,850 Type :Portable Component :Metal/plastic Cutting Angle :0° to 45° Cutting Depth :3 1/8" (90°) - 2 1/4" (45°) Amperage :15 A Rip Capacity :20" (right) - 12" (left) Arbor Size :5/8" Blade Size :10" Included :Miter gauge, push stick, carbide blade (24 teeth) and blade guard. Warranty :3-year limited warranty, 1-year free service contract, 90-day money-back guarantee

What does  the 20 in rip capacity mean?

Asked by: Bryan 34
With the guide on you can cut a piece that is 20 inches wide.
Answered by: Garyjob
Date published: 2019-06-01

Is it DWE7480 model?

Asked by: Saadmbr
No, mine is the 745 and it's great!
Answered by: DaveAndrew
Date published: 2019-02-06

If this was on a workbench would it move around and need to be secured?

Asked by: DaveAndrew
The rubber feet are adequate for keeping it in place. If you need more stability, there are holes in the frame where you can screw/bolt it to your bench.
Answered by: Blurap
Date published: 2019-02-04

Hi weight of this saw please

Asked by: GCCCCCC
Not sure of the weight, but I’m a 67 year old woman, on the small side, and I can lift it and move it from my place to my son’s.
Answered by: Love diy
Date published: 2018-12-20

What is the model #?

Asked by: Dave Ram
DEWALT DW745 10-in 15 Amp Compact Job Site Table Saw with 20-in Rip Capacity
Answered by: Sylb
Date published: 2018-09-11

Will this accept dado blades

Asked by: dlg927
Manufacturer does not recommend use of dado blade with this saw.
Answered by: Sylb
Date published: 2019-02-22

Is this table saw cordless or corded?

Asked by: james 355
Corded
Answered by: Qwerty09876
Date published: 2018-07-15

Will this saw sit on my dewalt mitre saw stand? 

Asked by: Slade123
  • y_2019, m_12, d_4, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_CA, sid_0027593, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Compact Table Saw - 10" - 15 A is rated 4.6 out of 5 by 89.
Rated 3 out of 5 by from has some flaws that you need to consider This is not a bad saw, but has some drawbacks. The best feature and the reason I bought it is the rip fence is attached to an adjustable track. No other saw has this and it is awesome. The major drawback is this saw is not compatible with a dado blade. The miter gauge is made of cheap plastic and does not fit with rails on the table. This makes mitered cuts very inaccurate. The rip fence is small which makes it difficult to attach a sacrificial fence or featherboards. It is easy to use and easily portable, so you need to consider the features that are important to you before buying this saw
Date published: 2013-07-11
Rated 5 out of 5 by from Good product for a beginner After doing my research on all the table saws out there, this one seemed to be the best one out there for a beginner or someone who would use it for small projects around the house. It was very easy to assemble the few parts that needed to be put on and it's instructions weren't difficult to understand. I did mark down the score for the price though. I feel that this should be a product that should be around 150 to 230 dollars. I've attached a couple of pics of my first project of a crafting ink rack that the wife needed built. It took me about an hour to make thanks to the table saw. Can't wait to start the next project.
Date published: 2011-03-14
Rated 5 out of 5 by from A great compact table saw I've been using this saw regularly for about 2 yrs.It replaced a heavier Dewalt job site table saw that I retired to the shed.I use it mostly for hardwood floors and custom finish carpentry.With a good blade,It cuts Flawlessly.Guide and miter when adjusted properly are also very precise.I love that it's light enough to move from job to job with ease.Very well made,quality saw that if cared for properly will last a long time.I like using it best with the optional stand.But it also works great on my truck's tail gate for the quick jobs.
Date published: 2011-01-07
Rated 5 out of 5 by from Love this table saw Love this table saw it cuts through hard woods with ease just like it says. I bought this table saw about a year ago and it still has not bogged down I love the powerful 15 amp moter it seriously is a work saw and heavy duty I could not due with out.i recommend this table saw to any one even if it will take a lot of abuse guaranteed tough just like it said on the box what I don't like about it is it will not accept a dado stack and the guard mos of the time can't even use it because it gets in the way of the push stick cause you have to angle the stick towards the fence to keep the wood against the fence what else not a dang thing they built this saw almost perfect
Date published: 2018-09-02
Rated 4 out of 5 by from Let 'er Rip And that was the first thing I did - redwood and Douglas fir 2 x 4s to 2 x 2s, pine 1 x 8s to 1 x 4s and 1 x 2s and even a few of 1 x 2s were trimmed down to 1 x 1s. The last set of cuts were made with a 60 tooth blade (colored red) with the "rubber baby buggy bumpers" (blade guard and anti-kick backs) removed so the rip fence could be brought to within a scant 3/4" of the blade. The saw is a bit loud, but not quite as loud as the router which I can now leave on the shelf when performing straight but narrow dado and rabbet cuts. The miter gauge is not the 16 oz doorstop I remember my grandfather having on his table saw, so I will keep my eyes peeled for something a little more substantial.
Date published: 2011-04-07
Rated 4 out of 5 by from Excellent, except .... haven't used it much yet, but to this point, everything is ++, except that the darned miter gauge guide bar is a very sloppy fit in the channel. why dewalt does this on an otherwise excellent product, is unfathomable.
Date published: 2013-10-25
Rated 5 out of 5 by from A very good tool First table saw I've ever owned for site work. I honestly didn't expect it to be anywhere near as good as it is. It was calibrated perfectly, right out of the box, and is extremely accurate. I was able to rip a bevel cut out of 60 feet of 5/4 red oak stock for a bar rail, at a cut depth of 2 1/2" without burning a single piece, with the blade that came with it. That in itself takes a huge bite out of time spent sanding. It's very likely the blade not being one of the mega tooth blades everyone thinks they need, was the reason for the clean cuts with no burn. More teeth, more heat, and less material raked from the cut. Try it before you buy a different type. The fence is awesome. Better than any I've ever used on a saw of this size, and better than my shop saw, which for other than dado work, might be soon rolled to the corner of the shop for a long deserved rest. If you take care of this saw and keep it clean, most folks will never need to buy another.
Date published: 2013-04-04
Rated 2 out of 5 by from Saw is just OK! I purchased this saw because I liked the Dewalt name and I had heard good things about their saws. While setting up the saw I noticed that the miter gauge was plastic and very sloppy in the track. I knew after setup that this miter gauge would never work for me. After further research and finding out that I also could not use a Dado blade. I packed it back into the box and returned it. Pros; 1) The fence looks to be accurate and easy to use. 2) The saw is easy to setup and use right out. Of the box. It took me all of 10 minutes to unpack and setup. Cons; 1) The miter gauge is plastic and very sloppy in the track, totally unusable! There is no metal replacement for this model either. 2) Dado can not be used with this model.
Date published: 2013-11-27
  • y_2019, m_12, d_4, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_89
  • loc_en_CA, sid_0027593, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Frequently bought together

DEWALT
10-in Carbide Saw Blades Pk/3
Format 10"x32-60THxPK3
Article #00275578
Model #DW3106P5B3C
★★★★★ ★★★★★
4.5
(15)

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store