Halloween DecorInflatable DecorationsLighting and Special EffectsIndoor DecorationsOutdoor Decorations

2-in-1 Pneumatic Flooring Tool - Staples/Nails 1 1/2"-2"

Article#00276202 Model#BTFP12569
2-in-1 Pneumatic Flooring Tool - Staples/Nails 1 1/2"-2"
 

Description

This Bostitch pneumatic flooring tool drives 15 1/2 gauge staples and 16 gauge L-shape cleat nails into 1 1/2-inch to 2-inch long flooring to give you twice the performance. It uses mallet actuated pneumatic driving action with a sequential firing for optimized operation. The flooring tool has low air requirements and features tool-free jam clearing. The ergonomic design, long handle, comfortable grip and lightweight design ensures its easy to use and reduces fatigue. It includes non-marring interchangeable base plates for use with 1/2-inch to 3/4-inch flooring.

You may also like

MAKITA
Pneumatic Roofing Nailer - 3/4 " to 1 3/4"
Article #11975432
Model #AN454
★★★★★ ★★★★★
0
(0)
METABO HPT
30-Degree Cordless Framing Nailer - 18 V Lithium-Ion
Format 2-3 1/2"x18V
Article #37815170
Model #NR1890DCM
★★★★★ ★★★★★
4.6
(17)
METABO HPT
Cordless Brad Nailer - 18-Gauge - 18 V Lithium-Ion
Format 5/8-2"x18GAx18V
Article #37815171
Model #NT1850DEM
★★★★★ ★★★★★
4.4
(42)
METABO HPT
Cordless Finish Nailer - 16-Gauge - 18 V Lithium-Ion
Format 1-2.5"x16GAx18V
Article #37815172
Model #NT1865DMM
★★★★★ ★★★★★
4.4
(63)
METABO HPT
Pneumatic Coil Roofing Nailer - 7/8"-1 3/4" - 16°
Format 7/8-1 3/4"x16DG
Article #37815178
Model #NV45AB2M
★★★★★ ★★★★★
4.8
(64)
BOSTITCH
Pneumatic Framing Nailer
Format 2 @3 1/2"
Article #0277074
Model #F28WW
★★★★★ ★★★★★
3.7
(13)
SENCO
Pneumatic Framing Nailer 325XP
Format 34DGx2-3 1/4"
Article #10595004
Model #4Z0101N
★★★★★ ★★★★★
4
(5)
FORESTO
Pneumatic Finishing Stapler - 18 GA - 3/8"
Format 3/8"x18GA
Article #03395107
Model #FO3 M32
★★★★★ ★★★★★
0
(0)
PASLODE
Nailer - 2 1/2-in. Cordless Finishing nailer
Format 16GAx3/[email protected]"
Article #22935139
Model #902000
★★★★★ ★★★★★
4.4
(8)
PASLODE
Cordless Nailer Kit - 7 V - Bonus Hoodie
Format 2-3.25"x30DGx7.4V
Article #22935293
Model #905800IXH
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Pneumatic Brad Nailer Kit - 5/8" - 2"
Format 5/8-2"x18GA
Article #73455187
Model #CHN10299AV
★★★★★ ★★★★★
0
(0)
CARPENTER AIR TOOLS
Carpenter Pneumatic 3-in-1 Flooring Nailer and Stapler
Article #330624724
Model #CFL5016
★★★★★ ★★★★★
0
(0)
PASLODE
Nailer / Stapler
Format 18GA
Article #22935197
Model #P18-FS200
★★★★★ ★★★★★
2
(1)
METABO HPT
Metabo HPT Pneumatic Pin Nailer - 1 3/8'' - 23-Gauge
Format 5/8-1 3/8"xGA23
Article #37815212
Model #NP35AM
★★★★★ ★★★★★
4.7
(73)
CRISP-AIR
Crisp-Air 90/40 Narrow Crown Stapler - 18 Gauge
Article #330674917
Model #CR9040
★★★★★ ★★★★★
0
(0)
BOSTITCH
Bulldog Pneumatic Roofing Nailer - 3/4 " to 1 3/4"
Format 3/4-1 3/4"
Article #00276201
Model #BRN175
★★★★★ ★★★★★
0
(0)

Technical specifications

Gauge :15 1/2 GA and 16 GA Type :2-in-1 pneumatic flooring tool Style :2-in-1 Component :Metal Color :Orange/grey Magazine Angle :Angled Height :8 1/4" (20.95 cm) Width :3" (7.62 cm) Length :10 1/8" (25.73 cm) Air Flow :3.7 CFM required Air Inlet :1/4" Quantity per Box :1 unit Magazine Capacity :100 Jam Clearing :Tool free Depth Setting :Adjustable Pressure :70-120 PSI Fastener Type :Staples and cleat nails Fastener Length :Staples and L-shape cleat nails from 1 1/2" to 2" (3.81 cm - 5.08 cm) Included :Tool mallet, air fitting, on-marring, interchangeable base plates for 1/2" through 3/4" flooring Packaging :Each

What gauge are the Bostich flooring cleats?

Asked by: Ricknailer
Most staples and cleats are marked 15.5 gauge which work for the 16 gauge gun. Its standard for all flooring staplers.
Answered by: DIGGZ
Date published: 2019-06-16

I just purchased the Bostitch item 572656 3 tool compressor. Is this compatable with the Bostitch 2 in1 floor nailer, item 689186. The compressor list 2.7 scfm at 90 psi.

Asked by: Mhughesinfonthill
Yes that 6 Ga compressor works with this floor nailer without any issue.
Answered by: Diyeverything
Date published: 2018-12-06

Does this tool work on engineered flooring

Asked by: Martie
This would work well on 3/4 inch engineered wood. 1/2 inch engineered flooring would require an 18 gauge nailer to avoid damaging the tongue.
Answered by: What do I know
Date published: 2018-06-04

Can you use 1 1/2 in nails on 2 in nailer? Please and thankyou

Asked by: Ehbd
Yes (according to the fastener specification quoted in the manual) Never tried myself. This nailer is very good and reliable.
Answered by: friend123
Date published: 2018-05-28

hi the nail gun Bostich item BTFP 1256  2in 1 this gun can use type L NAIL and staple ?please me know if i order now safe tax right

Asked by: xuan78
  • y_2019, m_12, d_7, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_CA, sid_00276202, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
2-in-1 Pneumatic Flooring Tool - Staples/Nails 1 1/2"-2" is rated 4.5 out of 5 by 66.
Rated 4 out of 5 by from Time saver for an old guy I had to replace a few tongue & groove boards on my porch. In the past I have rented nailers with poor time consuming results. I found this Bostitch nailer which is identical to the Dewalt nailer with the same model #. I have only shot 50 or so nails through it but I can say it makes the job so much easier. I was nailing 5/4 tongue & groove Douglas Fir. I shot the nails with no plastic base plate installed so the nails would go through the top of the tongue. No problems just don't hit too hard. I have a lot of 3/4 Oak flooring to put down this winter. Hopefully the nailer continues to give great results. I have no reason to think it won't.
Date published: 2015-10-09
Rated 5 out of 5 by from Bought this to install 3/4" oak in my second floor and it worked great. I bought vs rent because for the price, you break even at about 1 week of rental. Super simple tool, just oiled daily and had no problems other than user error for the entire project. If I had to do a floor again, I'd buy this in a heartbeat. FYI, I used the Bostitch pancake compressor with the 3 tools. It supplied enough air overall, but had to run a lot when I really got going on a run. I also used the 2" L-shaped cleats which worked very well.
Date published: 2015-08-28
Rated 5 out of 5 by from Great/Tool I purchased this tool to install 3/4 in maple hardwood floors. I used my military discount to buy this tool. Great Price. I like this tool b\c it uses either cleats or staples. I placed a 200 sq ft room and had NO problems with this tool. It worked well with no mis fires and placed 1500 cleats. I oiled it dailt b\f use. I also liked that the tool came with several face plates for differrent types of flooring thickness.
Date published: 2016-12-30
Rated 5 out of 5 by from Bostitch nailer works perfectly I am halfway through finishing the main floor of my home (about 1000 sqaure feet so far) and the nailer has worked perfectly. No jams, no misfires; nothing. It has worked perfectly. I am using the 2 inch nails; not the staples and am having great luck so far. Buy this product with confidence.
Date published: 2016-01-21
Rated 4 out of 5 by from Be careful with engineered woods I bought this nailer after much research to install a 1/2" engineered bamboo floor. At first I started with 2" staples as that is what the floor manufacturer recommended, but quickly discovered that staples would not work as none would seat correctly. It was consistent that one side of the staple would either curl, or crumple. I tried adjusting the air regulation but to no avail. I'm not sure if this problem was due to the nailer or because of the density of the engineered bamboo. I switched over to L Cleats and had almost 100% success rate in seating for 800 square feet of flooring and about 2000 cleats. I put in a few drops of the supplied oil after every 8 hours of usage and have not had any issues. You will not be able to use this nailer on the beginning strip against a wall or the last two strips against a wall. So, either be ready to mess with some glue, or look at buying a finishing nailer to take care of those areas. Good luck!
Date published: 2017-01-09
Rated 5 out of 5 by from Time saver The pneumatic nailer has been a great time saver. After nailing the first few rows of hardwood using an air gun nailer, switching to this stapler nailer has made the process much easier. I have to advise hitting the plunger with consistent force to ensure the staples are completely recessed above the tongue of the board. Otherwise it's difficult to remove the 2" staple without damaging the hardwood. Also too much pressure can cause splitting. Overall, we've really enjoyed using it.
Date published: 2015-11-25
Rated 5 out of 5 by from Great tool I purchased this nailer to install solid hickory flooring. Although I had read reports of splintered tongues, I had no trouble using the 2 inch cleats. I experienced one minor jam in thousands of cycles. The issue was easy to resolve and might have been caused by a defective cleat. Generally, this tool provides a very consistent fastener application and does a great job pulling in warps. It is easy to load and no special skill is required o operate it. This is a well made and very robust tool that should hold up over many years.
Date published: 2017-04-03
Rated 5 out of 5 by from Great buy Bought this to lay 3/4" thick oak flooring. My 15 year old son used it without a hitch. He did the nailing while I picked through the wood to lay. I would buy again without a doubt. Easy to load and operate. Oiled it once a day and used 2"cleats. Have the upper floor of our home almost done. They built a real nailgun with this one.
Date published: 2016-07-15
  • y_2019, m_12, d_7, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_66
  • loc_en_CA, sid_00276202, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Frequently bought together

DEGIL SAFETY
Safety glasses
Article #86575158
Model #7050500
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Pistol Grip Blow Gun
Article #7345042
Model #MP514300AV
★★★★★ ★★★★★
0
(0)
RCR
"Contractor" Air Hose
Format 3/8"x25'
Article #0412762
Model #HAC3825
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Air Compressor Nylon Recoil Hose - 25'
Format 1/4"x25'
Article #73455178
Model #MP268100AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
17-Accessory Set
Format 17PC
Article #7345027
Model #MP284701AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Lubricant for Pneumatic Tools
Format 8OZ
Article #7345065
Model #ST127012AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
"Quiet Series" Electric Air Compressor - 8 Gal. - 1.0 HP
Format 8GAx1HP
Article #73455217
Model #DC080500
★★★★★ ★★★★★
5
(1)
RCR
"Contractor" Air Hose
Format 3/8"x50'
Article #0412763
Model #HAC3850
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Ball Foot Chuck - 1/4" Female NPT
Format 1/4"
Article #73455205
Model #MP323300AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Tire Inflator with Gauge
Format 10-100LB
Article #73455195
Model #MP600000AV
★★★★★ ★★★★★
1
(1)
CAMPBELL HAUSFELD
20-Piece Air Compressor Accessory Kit
Format 20PC
Article #73455233
Model #MP604103AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Vertical Air Compressor - 60-Gallon - 3.7 HP
Format 60GAx3.7HP
Article #73455238
Model #XC602100
★★★★★ ★★★★★
0
(0)
DEGIL SAFETY
Safety Flex Goggle
Article #8657090
Model #7052000
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Coupler and Plug Set
Format 4PC
Article #7345028
Model #MP211900AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Vertical Compressor - 80 Gal. - 5 HP
Format 80GAx5HP
Article #73455239
Model #XC802100
★★★★★ ★★★★★
0
(0)

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store