2-in steel scraper

Article#97895000 Model#00138 Format2"
2-in steel scraper
 

Description

Scraper blade for hard surfaces. To remove thin-set ceramic, glue, carpeting, etc. Fits any reciprocating saw. 1-year warranty. 2 in. Made of steel.

Technical specifications

You may also like

BOSCH
Wood Reciprocating Saw Blade 9"
Format 9"
Article #19835497
Model #RDN9V-25B
★★★★★ ★★★★★
0
(0)
BOSCH
Wood Reciprocating Saw Blade - 6"
Format 6"
Article #19835496
Model #RDN6V-25B
★★★★★ ★★★★★
0
(0)
BOSCH
Reciprocating Saw Blade Set - Bi-Metal - 10 pieces
Format 9PC
Article #19836194
Model #RSE009
★★★★★ ★★★★★
2
(1)
BOSCH
RECIPROCATING SAW BLADE
Format 9"xPK5
Article #19835282
Model #RM918
★★★★★ ★★★★★
0
(0)
BOSCH
RECIPROCATING SAW BLADE
Format 6"xPK5
Article #19835278
Model #RM614
★★★★★ ★★★★★
0
(0)
BOSCH
Wood Reciprocating Saw Blades - 6" - 5-Pack
Format 6"xPK5
Article #19835709
Model #RDN6V
★★★★★ ★★★★★
4
(1)
BOSCH
Wood Reciprocating Saw Blades - 9" - 5-Pack
Format 9"xPK5
Article #19835710
Model #RDN9V
★★★★★ ★★★★★
5
(7)
BOSCH
RECIPROCATING SAW BLADE
Format 9"xPK5
Article #19835289
Model #RW96
★★★★★ ★★★★★
0
(0)
BOSCH
RECIPROCATING SAW BLADE
Format 6"xPK5
Article #19835279
Model #RM618
★★★★★ ★★★★★
0
(0)
BOSCH
RECIPROCATING SAW BLADE
Format 9"xPK5
Article #19835275
Model #19835276
★★★★★ ★★★★★
5
(1)
BOSCH
RECIPROCATING SAW BLADE
Format 9"xPK5
Article #19835277
Model #RESM9X2
★★★★★ ★★★★★
3.7
(3)
BOSCH
RECIPROCATING SAW BLADE
Format 12"xPK5
Article #19835296
Model #RP125
★★★★★ ★★★★★
5
(1)
BOSCH
RECIPROCATING SAW BLADE
Format 6"xPK5
Article #19835280
Model #RM624
★★★★★ ★★★★★
0
(0)
BOSCH
RECIPROCATING SAW BLADE
Format 12"xPK5
Article #19835290
Model #RW126
★★★★★ ★★★★★
0
(0)
BOSCH
"Progressor" Wood Reciprocating Saw Blade - 6" - 5-Pack
Format 6"xPK5
Article #19835711
Model #RPRW8
★★★★★ ★★★★★
0
(0)
BOSCH
RECIPROCATING SAW BLADE
Format 6"xPK5
Article #19835288
Model #RW66
★★★★★ ★★★★★
0
(0)
BOSCH
RECIPROCATING SAW BLADE
Format 9"xPK5
Article #19835268
Model #RAP9V
★★★★★ ★★★★★
0
(0)
BOSCH
RECIPROCATING SAW BLADE
Format 6"xPK5
Article #19835267
Model #RAP6V
★★★★★ ★★★★★
0
(0)
BOSCH
RECIPROCATING SAW BLADE
Format 12"xPK5
Article #19835283
Model #RM1218
★★★★★ ★★★★★
0
(0)
BOSCH
RECIPROCATING SAW BLADE
Format 6"xPK5
Article #19835272
Model #RECM6X2
★★★★★ ★★★★★
0
(0)
BOSCH
RECIPROCATING SAW BLADE
Format 9"xPK5
Article #19835273
Model #RECM9X2
★★★★★ ★★★★★
0
(0)
BOSCH
Reciprocating saw blade
Format 9"xPK5
Article #19835295
Model #RP95
★★★★★ ★★★★★
0
(0)
BOSCH
RECIPROCATING SAW BLADE
Format 6"xPK5
Article #19835276
Model #RESM6X2
★★★★★ ★★★★★
3.5
(4)
BOSCH
RECIPROCATING SAW BLADE
Format 6"xPK5
Article #19835274
Model #REDM6X2
★★★★★ ★★★★★
0
(0)
MAKITA
Makita(R) Steel Blades for Drywall - 3/4" - Black - 2/Pack
Format 3/4" 2PK
Article #11975459
Model #B-49703
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
2-in steel scraper is rated 2.9 out of 5 by 17.
Rated 5 out of 5 by from Does the job if you do it correctly I bought this tool to help to remove 20 year old linoleum from my kitchen. Granted the linoleum was coming up mostly by pulling it, but when it wouldn't, the spyder scraper did the job. Just be sure you do it at a low angle and DO NOT put any perpendicular pressure on the scraper - that will probably cause it to break (even though that didn't happen for me). I also bought the Warner scraper and that paled in comparison to how fast the spyder did the job. I would recommend it to anyone who would want to cut the scraping time drastically. I ended up returning the Warner scraper the next day.
Date published: 2012-01-07
Rated 4 out of 5 by from A Valuable Tool I like the blade, but it isn't quite stiff enough for the use I'm making of it. I'm scraping some fully cured and very hard epoxy resin and injection ports from a concrete floor (crack repair), and the blade flexes a bit too much to be the only tool I'll need. I'll still end up needing a hand grinder with an abrasive wheel to finish the job. But it is taking off the used ports and a lot of the resin which was smeared over/into the crack, which will mean less grinding to do. With resin this hard, I have to use a little more angle than the directions on the package suggest, and that makes the tool (blade mounted in the reciprocating saw) bounce a bit much if I'm not very careful.
Date published: 2013-05-30
Rated 1 out of 5 by from Spyder Scraper 2" This product specifically states it is for use on removal of thin set. I purchased 2 and was able to remove about 5 square feet of thin set before I had broken both. I varied speed and did not exceed a 45 degree angle and both were broken with in 15 minutes. I would never suggest this item for thin set.
Date published: 2011-12-31
Rated 2 out of 5 by from breaks too easy This product can work very well and does, but if it get too much pressure which is not very much it will snap like a toothpick. Best thing to do is to be able to grind it down shorter and drill a new hole with a cobalt bit where it attaches to the reciprocating saw if you want to extend the life of it, otherwise buy plenty of them and they are not exactly cheap.
Date published: 2013-11-26
Rated 1 out of 5 by from Junk I broke two of these in about 15 minutes removing a small area of linoleum, one of the recommended uses on it's package. It was used at a low angle and with little pressure and still they broke. I would only recommend these blades if one would find themselves trapped in a large WET paper bag. Even then you should carry 2 or 3 of them.
Date published: 2013-02-16
Rated 3 out of 5 by from Good for what it is for I used this for self adhesive tiles as there really is no other item out to get them up. It works really good bringing it up pretty fast. My only issue is if you go to high an angle it snaps at the tang area making the item useless. I have broken 2 so far due to this.
Date published: 2013-06-17
Rated 4 out of 5 by from 2in spider blade This product works realy well for i used it for removeing tile grout off concreate
Date published: 2013-07-31
Rated 2 out of 5 by from Not for heavy scraping This is NOT for any kind of heavy scraping. Light duty only. Needs to be made of much tougher steel, and thicker. Maybe bi-metal would help. Any heavy scraping, even at low angle of attack, will fatige break the shank where it enters the saw clamp jaws. Works ok for light stuff.
Date published: 2012-09-27
  • y_2020, m_10, d_18, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_CA, sid_97895000, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store