3/4x4x8 - Plywood Pine ACX

Article#0938034 Model#PINE34 Format3/4"x4'x8'
3/4x4x8 - Plywood Pine ACX
 

Description

The Plywood Pine ACX is made of solid veneer and sanded one side. It can be used both indoor and outdoor for many DIY projects or finishing works such as furniture, table or counter tops.

Technical specifications

Width :4' (1.22 m) Length :8' (2.44 m) Thickness :3/4" (1.9 cm) Type :Plywood Panel Standard :ACX Component :Pine Style :Sanded

You may also like

Plywood Spruce Standard - 1/2" x 4" x 8"
Format 1/2x4'x8'
Article #0938003
Model #CP12ES
★★★★★ ★★★★★
3
(1)
Low Price
5/8x4x8 - Plywood Spruce Standard
Format 5/8"x4'x8'
Article #0938004
Model #CP58ES
★★★★★ ★★★★★
0
(0)
3/4x4x8 - Plywood Spruce Standard
Format 3/4"x4'x8'
Article #0938006
Model #CP34ES
★★★★★ ★★★★★
0
(0)
3/8x4x8 - Plywood Spruce Standard
Format 3/8x4'x8'
Article #0938002
Model #CP38ES
★★★★★ ★★★★★
3.7
(3)
1/2x4x8 - Plywood Spruce Select
Format 1/2"x4'x8'
Article #0938012
Model #CP12ESL
★★★★★ ★★★★★
0
(0)
3/4x4x8 - Plywood Spruce Select
Format 3/4x4'x8'
Article #0938015
Model #CP34ESL
★★★★★ ★★★★★
0
(0)
5/8x4x8 - Plywood Spruce Select
Format 5/8x4'x8'
Article #0938013
Model #CP58ESL
★★★★★ ★★★★★
0
(0)
1/4x4x8 - Plywood Pine ACX
Format 1/4"x4'x8'
Article #0938029
Model #PINE14
★★★★★ ★★★★★
1
(1)
5/8x4x8 - Plywood Spruce Standard - Tongue and Groove
Format 5/8"x4'x8'
Article #0938005
Model #CP58ESE
★★★★★ ★★★★★
0
(0)
3/8x4x8 - Plywood Spruce Select
Format 3/8"x4'x8'
Article #0938011
Model #CP38ESL
★★★★★ ★★★★★
0
(0)
B1C Plywood - 5/8'' x 4' x 8'
Format 5/8"x4'x8'
Article #0938032
Model #PINE58
★★★★★ ★★★★★
0
(0)
Plywood Pine ACX -3/8'' x 4' x 8'
Format 3/8"x4'x8'
Article #0938030
Model #PINE38
★★★★★ ★★★★★
0
(0)
Plywood Panel for Balcony - 3/4" x 48" x 96"
Format 17MMx48"x96"
Article #0938038
Model #CP111648D
★★★★★ ★★★★★
0
(0)
3/4x4x8 - Plywood Fir Select
Format 3/4"x4'x8'
Article #0938022
Model #CP34SS
★★★★★ ★★★★★
0
(0)
1/2x4x8 - Plywood Fir Select
Format 1/2"x4'x8'
Article #0938019
Model #CP12SS
★★★★★ ★★★★★
0
(0)
5/8x4x8 - Plywood Fir Select
Format 5/8"x4'x8'
Article #0938020
Model #CP58SS
★★★★★ ★★★★★
0
(0)
5/8x4x8 - Plywood Spruce Select - Tongue and Groove
Format 5/8"x4x8'
Article #0938014
Model #CP58ESLE
★★★★★ ★★★★★
0
(0)
3/8x4x8 - Plywood Fir Select
Format 3/8"x4'x8'
Article #0938018
Model #CP38SS
★★★★★ ★★★★★
1
(1)
Plywood Panel for Balcony - 11/16" x 60" x 120"
Format 17MMx60"x120"
Article #0938036
Model #CP1116510D
★★★★★ ★★★★★
0
(0)
1/2x2x4 - Sanded Fir Plywood Panel - G1S
Format 1/2"x2'x4'
Article #8914028
Model #01110204
★★★★★ ★★★★★
0
(0)
Plywood Panel for Balcony - 11/16" x 48" x 120"
Format 17MMx48"x120"
Article #0938037
Model #CP1116410D
★★★★★ ★★★★★
0
(0)
Plywood Panel for Balcony - 11/16" x60" x 96"
Format 17MMx60"x96"
Article #0938039
Model #CP111658D
★★★★★ ★★★★★
0
(0)
1/2x4x4 - Sanded Fir Plywood Panel - G1S
Format 1/2"x4'x4'
Article #8914029
Model #01110404
★★★★★ ★★★★★
0
(0)
5/8x4x8 - Plywood Fir Select - Tongue and Groove
Format 5/8"x4'x8'
Article #0938021
Model #CP58SSE
★★★★★ ★★★★★
0
(0)
1/2x4x8 - Plywood Spruce D-Grade
Format 1/2"x4'x8'
Article #0938008
Model #CP12EGB
★★★★★ ★★★★★
0
(0)

will you cut the plywood for me so that I can fit it in to my Jeep ?

Asked by: muddyboots
My Lowe’s has a saw and will cut it.
Answered by: DanDL
Date published: 2019-04-16

There is any chance of cutting the wood. I want length of 6 Feet.

Asked by: sundeep
  • y_2020, m_8, d_12, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_CA, sid_0938034, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
3/4x4x8 - Plywood Pine ACX is rated 4.5 out of 5 by 48.
Rated 5 out of 5 by from Great Product for Cabinets I'm making cabinets for my shop, and I first started with the traditional 23/32 plywood - until I was getting some MDF and saw this next to it. Even the C side is smoother than either side of traditional BC plywood. Since I'm painting the cabinets on the outside and varnishing the inside, I put the A side to the inside and fill any knotholes on the outside. Not only does this material take less sanding, I've found the sheets to have very little bow in them and fewer voids than traditional. When you add these benefits to a cost that's less than either traditional plywood and MDF, I saw you can't beat it.
Date published: 2017-08-08
Rated 4 out of 5 by from Great Plywood (depending...) I bought 85 sheets to redo my barn floor and am planning on cutting tongues/grooves into the edges and floating the floor. I am planning on staining and 2-part epoxying the floor. Given the application (staining), I need sheets without putty and the repair "footballs." I got 3 skids, and the "A" sides were a mixed bag. One skid had next to no repairs and the other two skids had approximately 25% to 33% sheets showing repairs (putty or footballs). To me, if you're going to sell AC grade plywood, why not just make it repair free? So if you're looking for a finished application with staining, just make sure you take a good look at the sheets you buy. [This review was collected as part of a promotion.]
Date published: 2019-02-26
Rated 5 out of 5 by from The product I purchased was 4x8, why are you showing 3x8 at all? I am happy with my purchase, but would not entertain 3x8 unless the was a specific requirement for it.
Date published: 2017-08-24
Rated 5 out of 5 by from Plywood flooring project We are building a house and we looked for an economical way to do a wood floor. This plywood was perfect. We lightly sanded the good side, ran a torch across it to bring out the grain, then cut into 4 door by 5 3/4 inch strips. Glued and nailed the strips down, stained and polyurethane. It is turning out great. I had no problems with the quality. Great product.
Date published: 2017-05-06
Rated 4 out of 5 by from A true A/C plywood This is a true A/C plywood product. Some pieces will have a better C side than others. If you have a project that you will be painting or covering with laminate, this will work for you.
Date published: 2016-02-08
Rated 5 out of 5 by from I would build a boat with this stuff! The last piece of Georgia Pacific Plytainium Plywood was such a piece of garbage that I felt this was worth the extra price. I purchased this to build a box for a Harbor Freight 4X8 Trailer. This required no finishing prior to painting and it look beautiful with John Deere Green generic mixed Acrylic latex house paint. The painted edges are exposed to the weather and show no signs of absorbing water.
Date published: 2017-08-31
Rated 5 out of 5 by from very nice I bought 2 sheets yesterday I was very impressed .When i cut the sheet there was little to no voids. Very solid plywood should work out nice . to bad we cant make a plywood like this in the USA. The price is worth it Lot less puddying and sanding .
Date published: 2011-11-20
Rated 5 out of 5 by from Little to no voids so far I have broken down three sheets to make base cabinet's, little to no voids, the ones or two I did find were very small. Will definitely buy again.
Date published: 2017-02-27
  • y_2020, m_8, d_12, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_48
  • loc_en_CA, sid_0938034, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store