3/8x4x8 - Plywood Spruce Standard

Article #0938002 Model #CP38ES Format3/8x4'x8'
3/8x4x8 - Plywood Spruce Standard
 

Description

The Standard spruce plywood is use for wall, flooring and roofing projects, both interior or exterior. It may contains small knots, knotholes or other imperfections. Manufactured with waterproof glue, it has strength and resistance to humidity

Technical specifications

Standard :Standard Thickness :3/8-in (1 cm) Width :4' (1.22 m) Length :8' (2.44 m) Type :Plywood Panel Style :Square Component :Spruce

You may also like

Plywood Spruce Standard - 1/2" x 4" x 8"
Format 1/2x4'x8'
Article #0938003
Model #CP12ES
★★★★★ ★★★★★
2.5
(4)
Plywood Spruce Standard - 3/4-in x 4-ft x 8-ft
Format 3/4"x4'x8'
Article #0938006
Model #CP34ES
★★★★★ ★★★★★
3.8
(4)
5/8x4x8 - Plywood Spruce Standard
Format 5/8"x4'x8'
Article #0938004
Model #CP58ES
★★★★★ ★★★★★
0
(0)
5/8x4x8 - Plywood Spruce Standard - Tongue and Groove
Format 5/8"x4'x8'
Article #0938005
Model #CP58ESE
★★★★★ ★★★★★
0
(0)
Plywood Spruce - 3/4" X 4' X 8'
Format 3/4"x4'x8'
Article #09385020
Model #803561501
★★★★★ ★★★★★
0
(0)
ACX Pine Plywood - 5/8-in x 4-ft x 8-ft
Format 3/4"x4'x8'
Article #0938034
Model #PINE34
★★★★★ ★★★★★
4.4
(51)
Plywood Spruce Standard - Tongue and Groove - 3/4-in x 4-ft x 8-ft
Format 3/4"x4'x8'
Article #0938007
Model #CP34ESE
★★★★★ ★★★★★
0
(0)
3/4x4x8 - Plywood Spruce Select
Format 3/4x4'x8'
Article #0938015
Model #CP34ESL
★★★★★ ★★★★★
0
(0)
Plywood Spruce - 5/8" X 4' X 8'
Format 5/8"x4'x8'
Article #09385021
Model #803561301
★★★★★ ★★★★★
0
(0)
1/2x4x8 - Plywood Spruce Select
Format 1/2"x4'x8'
Article #0938012
Model #CP12ESL
★★★★★ ★★★★★
0
(0)
5/8x4x8 - Plywood Spruce Select
Format 5/8x4'x8'
Article #0938013
Model #CP58ESL
★★★★★ ★★★★★
0
(0)
ACX Pine Plywood - 1/4-in x 4-ft x 8-ft
Format 1/4"x4'x8'
Article #0938029
Model #PINE14
★★★★★ ★★★★★
2
(3)
ACX B1C Plywood - 5/8-in x 4-ft x 8-ft
Format 5/8"x4'x8'
Article #0938032
Model #PINE58
★★★★★ ★★★★★
0
(0)
5/8x4x8 - Plywood Fir Select - Tongue and Groove
Format 5/8"x4'x8'
Article #0938021
Model #CP58SSE
★★★★★ ★★★★★
0
(0)
3/8x4x8 - Plywood Spruce Select
Format 3/8"x4'x8'
Article #0938011
Model #CP38ESL
★★★★★ ★★★★★
0
(0)
3/4x4x8 - Plywood Fir Select
Format 3/4"x4'x8'
Article #0938022
Model #CP34SS
★★★★★ ★★★★★
0
(0)
ACX Pine Plywood - 3/8-in x 4-ft x 8-ft
Format 3/8"x4'x8'
Article #0938030
Model #PINE38
★★★★★ ★★★★★
1
(1)
Sanded Fir Plywood Panel - G1S - 7/16-in x 2-ft x 4-ft
Format 1/2"x2'x4'
Article #8914028
Model #01110204
★★★★★ ★★★★★
1
(1)
5/8x4x8 - Plywood Fir Select
Format 5/8"x4'x8'
Article #0938020
Model #CP58SS
★★★★★ ★★★★★
0
(0)
1/2x4x4 - Sanded Fir Plywood Panel - G1S
Format 1/2"x4'x4'
Article #8914029
Model #01110404
★★★★★ ★★★★★
0
(0)
Tolko Plywood - Select Douglas Fir - 1/2-in D x 4-ft W x 8-ft L
Format 1/2"x4'x8'
Article #0938019
Model #CP12SS
★★★★★ ★★★★★
0
(0)
Tolko Select Plywood - Douglas Fir - Square Panel
Format 3/8"x4'x8'
Article #0938018
Model #CP38SS
★★★★★ ★★★★★
0
(0)
5/8x4x8 - Plywood Spruce Select - Tongue and Groove
Format 5/8"x4x8'
Article #0938014
Model #CP58ESLE
★★★★★ ★★★★★
0
(0)
Treated Plywood - 5/8" x 4' x 8'
Format 5/8"x4'x8'
Article #0938027
Model #CP58CCA
★★★★★ ★★★★★
0
(0)

Can you use this for roofing underneath shingles?

Asked by: DIY builder
It is exterior grade, however I wouldn't use it for roofing as its too thin. I would use 3/4" or 5/8" for structural integrity. I used this for underlayment on top of my existing subfloor. For you I would be concerned with warped and split edges over time. Not to mention, the quality isn't great.
Answered by: James123456789
Date published: 2021-05-21

Can I cut and use this plywood as a Riser and paint it?

Asked by: Raj Mohan
If you're asking about a 3/8 inch plywood, I think it's a bit thin for that job. Maybe go up a size or two to 1/2 or 5/8 inch thickness.
Answered by: Mikhail V
Date published: 2021-04-21

Would I be able to have the sheets cut in 8 inch strips to make 6 boards at 8 “ x 96” boards?

Asked by: Al74
Aside from the other sarcastic answer, yes, they will do that for you, but depending on the blade, you will lose between 1/16" to 1/8" per cut. So you'll either be shy a little on each board or have seven the size you want and the last will be between 7/16" to 7/8" shy of 12". You can ask them to use a fine tooth blade, they may have one, they may not, but it doesnt hurt to ask.
Answered by: Cravingglory
Date published: 2020-07-12

Can I install Taiga Building Products 3/8 x 4-ft x 8-ft Standard Spruce Plywood as underlayment for vinyl plank flooring in my basement? If yes, what is the best way to install it on the concrete basement floor?

Asked by: Javed Iqbal
Yup use a self leveling concrete and install over plastic or water membrane, Foam insulation and 2" x 4" sleepers.
Answered by: CravingGlory
Date published: 2019-02-01

If we were to come in store, would you be able to cut down the plywood to a plan for an extra cost?

Asked by: Ethan Skinna
They cut for free up to 3 cuts, then after that its 50cents a cut... although we've never been charged! 
Answered by: StevieRhi
Date published: 2019-05-29

Any custom cutting service for plywood panel at this time?

Asked by: Williamk
  • y_2021, m_8, d_1, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_CA, sid_0938002, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
3/8x4x8 - Plywood Spruce Standard is rated 4.3 out of 5 by 6.
Rated 5 out of 5 by from plywwod not much to say on a sheet of plywood.............
Date published: 2021-01-13
Rated 5 out of 5 by from Good quality plywood. Good quality plywood for the garage ceiling. Installed with ease, time will tell how it holds.
Date published: 2020-09-12
Rated 5 out of 5 by from Quality Good quality product and competitive price. Thumbs up
Date published: 2020-08-03
Rated 2 out of 5 by from Very thin I wouldn't use it for anything other than subflooring; if that. 6 out of 10 panels had cracks right though. Next time I will spend the extra to get a better grade.
Date published: 2018-03-09
Rated 4 out of 5 by from Shelf board I bought this a couple weeks back to build storage in the garage. It served as the floor to an 8 by 9 foot. It does the job very adequately, but be careful putting it in because as Spruce it is very soft wood. If you drill into it at too powerful a setting you will drill the screw right through it.
Date published: 2018-08-09
Rated 5 out of 5 by from qualilty plywood good products but the staff at Rona really make the difference.
Date published: 2021-02-11
  • y_2021, m_8, d_1, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_CA, sid_0938002, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store