Halloween DecorInflatable DecorationsLighting and Special EffectsIndoor DecorationsOutdoor Decorations

3" Silver Steel Knotted Wire Cup Brush

Article#00275793 Model#DW4910 Format3"
3" Silver Steel Knotted Wire Cup Brush
 

Description

The Dewalt knotted wire cup brush is designed with high-grade wire. It has an internal holding plate provides smooth, consistent and safe performance. The brush is used for metal deburring, weld cleaning, surface preparation, edge-blending and dust-removal. It must be used with a tool working at a maximum speed of 14 000 RPM. The product is made of steel with a silver finish and has a 3" diameter.

You may also like

eco
EXCHANGE-A-BLADE
Industrial Diamond Saw Blade - 5"
Format 5"
Article #34595900
Model #3110412
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Metal Depressed-Centre Grinding Wheel - 5"
Format 5x0.05x7/8"
Article #34595289
Model #2160322
★★★★★ ★★★★★
0
(0)
DEWALT
DeWalt Cut-Off Wheel - Type 1 XP - 4"
Format 4x0.045x5/8"
Article #00277160
Model #DW8850
★★★★★ ★★★★★
5
(2)
CAMPBELL HAUSFELD
CUT-OFF WHEEL
Format 3"x1/16"xST5
Article #7345036
Model #MP287901AV
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Simple Row Cupstone Recyclable Blade - 4 1/2" - Bronze
Format 4 1/2"
Article #34595958
Model #2118805
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Metal Wheel - Depressed Centre Type 27 - 5'' x 1/8''
Format 5x1/8"
Article #34595205
Model #2160152
★★★★★ ★★★★★
0
(0)
NORTON
Masonry Depressed Centre Grinding Wheel - 5"
Format 5x1/4x7/8"
Article #95045040
Model #66252843614
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Ultra-Thin Metal/Stainless Steel Flat Wheel -Type 1 - 4 1/2"
Format 4 1/2x3/64"
Article #34595870
Model #2140412
★★★★★ ★★★★★
0
(0)
NORTON
Masonry Cut-Off Blade for Right Angle Grinder - 4 1/2"
Format 4 1/2x1/16x7/8"
Article #02075257
Model #07660701621
★★★★★ ★★★★★
0
(0)
NORTON
Metal Cut-Off Blade - 6"
Format 6x0.40x7/8"
Article #77375722
Model #07660702757
★★★★★ ★★★★★
0
(0)
NORTON
Masonry Cut-Off Blade for Right Angle Grinder - 4 1/2"
Format 6 1/2x1/8"
Article #02075164
Model #07660789089
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Masonry Wheel - Depressed Centre - 5'' x 1/8''
Format 5x1/8"
Article #34595206
Model #2160262
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Masonry Depressed-Centre Grinding Wheel - 4 1/2"
Format 4 1/2"
Article #34595195
Model #2160212
★★★★★ ★★★★★
0
(0)
SHOPSMITH
Metal Cutting Wheel - DuraCut - 4 1/2" - 10-Pack
Format 0.06x4.5"xPK10
Article #77375644
Model #13923
★★★★★ ★★★★★
0
(0)
DEWALT
6" Silver Steel Bench Grinder Crimped Wire Brush
Format 6"
Article #00275791
Model #DW4904
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Ultra-Thin Metal/Stainless Steel Flat Wheel -Type 1 - 5"
Format 5x3/64"
Article #34595871
Model #2140422
★★★★★ ★★★★★
0
(0)

Technical specifications

Model :Knotted Wire Component :Steel Color :Silver Utilization :Metal Deburring, Weld Cleaning, Surface Preparation, Edge-Blending, Dust-Removal Diameter :3"
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
3" Silver Steel Knotted Wire Cup Brush is rated 4.8 out of 5 by 23.
Rated 4 out of 5 by from Great for paint removal from cement Wear a respirator, earplugs, gloves, safety glasses and a full grinding shield. Also, physically isolate the area by taping plastic up around your working area. Purchase a 20" box fan (Lasko) and a couple 20"x20" furnace filters. Tape the filter to the inlet side of the fan and use this to clear the air in your working area. It's a secret trick and works a charm. I also recommend stepping up to the stainless steel version if you have a lot of area to cover. This Cup Brush did a great job on surfaces and into cracks. SERIOUSLY, wear the safety equipment and please watch for lead paint. Don't expose your kids to lead paint dust or they will suffer brain damage. Same warning goes for you. Assume the paint is lead and get the respirator to protect yourself. How often do you get to really wear one? They look cool and it tells everyone you are a smart craftsman.
Date published: 2015-07-03
Rated 5 out of 5 by from Does the job This brush does the job of basically sanding down masonry. It creates a lot of dust, as any sanding or scrapping might, but it does do the trick. Don't expect it to grind down masonry very fast. It takes a fair bit of time, as it should because concrete is meant to last.
Date published: 2014-01-21
Rated 5 out of 5 by from It removed flaking paint off my shed wall (24"X8") very well. The biggest plus was that it lost NONE of the twisted wires during the operation. Which is the general problem with twisted wire power brushs.
Date published: 2014-01-04
Rated 5 out of 5 by from The Gold Brush... ...even tho you can't use this in California. I got this to clean up some concrete edges in a damaged floor of a warehouse. It stirred up so much dust that I wished I would have bot some masks instead of holding my breath. The job would have gone faster. The brush was almost like new after I had finished. I doubt my lungs were.
Date published: 2014-05-30
Rated 5 out of 5 by from 3-in Knotted Cup Brush This Item works very well, I've used many different Brands of Cup Brushes and this one works great, the price is also good. But like all the others use your saftey shield, Gloves and Saftey Glasses when working with it. This Item is only as good as the user. I use these in my work, and I use about 3 or 4 a month, so far the Dewalt is out proformimg B.& D., and the others in proformance 2 to one, and price is about 1/3nd. the cost. I would tell a friend to us it.
Date published: 2014-11-08
Rated 4 out of 5 by from Saves a ton of time on paint removal I was using chemical stripper and a regular wire brush on the end of a drill. It took 8 hours just to get the hood of my van down to the metal. Switched to this with an angle grinder (corded works best) and I finished the rest of the whole van in 32 hours. I figure, given the area that I cleaned, I cut my time in half.
Date published: 2017-05-14
Rated 5 out of 5 by from cup brush This product is a little more expensive than others but is worth the price. it out lasted cheaper ones buy far
Date published: 2015-10-07
Rated 5 out of 5 by from DEWALT 3-in knotted The sum and substance is this in a nutshell: buy the part that was made for the tool. You can attachments made by other manufacturers that say the attachments are reciprocal, but it never fits quite right. Buy the attachment from the brand of the tool that you're purchasing it for. [This review was collected as part of a promotion.]
Date published: 2018-10-11
  • y_2019, m_9, d_29, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_en_CA, sid_00275793, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store