Heavy-Duty Staple Hammer

Article #0012004 Model #HT50-10
Heavy-Duty Staple Hammer
 

Description

Heavy-duty staple hammer. Uses 4 x T-50 staple sizes: 1/4 in., 5/16 in., 3/8 in. and 1/2 in. Loads 2 full strips.

Technical specifications

You may also like

ARROW
Staple gun
Article #0012002
Model #T50
★★★★★ ★★★★★
4.7
(6605)
ARROW
3/8-in. staples
Format 3/8"x5000BX
Article #0012114
Model #506 IP
★★★★★ ★★★★★
4.7
(62)
ARROW
Staples
Format 3/8"xPK1250
Article #0012029
Model #50624
★★★★★ ★★★★★
4.5
(34)
RAMSET
TRIGGER TOOL
Format 0.22GA
Article #22935182
Model #45100
★★★★★ ★★★★★
0
(0)
STANLEY
Manual Stapler Gun
Article #03055902
Model #TR110
★★★★★ ★★★★★
3
(20)
RAMSET
TRIGGER TOOL
Format 0.27GA
Article #22935183
Model #COBRA+
★★★★★ ★★★★★
0
(0)
STANLEY FATMAX
Stapler
Article #03055929
Model #CT10X
★★★★★ ★★★★★
3.2
(6)
RAMSET
Drive Pins
Format 2 1/2"xBT/100
Article #2293148
Model #1516
★★★★★ ★★★★★
0
(0)
RAMSET
Power Load
Format CAL.22xBT/100
Article #2293125
Model #C42CW
★★★★★ ★★★★★
5
(1)
RAMSET
HAMMER TOOL
Format 0.22GA
Article #22935181
Model #45000
★★★★★ ★★★★★
4.7
(3)
RAMSET
DRIVE PINS
Format 3"xBT/100
Article #2293149
Model #1524
★★★★★ ★★★★★
0
(0)
STANLEY FATMAX
Hammer Stapler
Article #03055943
Model #PHT250C
★★★★★ ★★★★★
1
(3)
STANLEY
Staple Gun
Article #03055640
Model #TR45
★★★★★ ★★★★★
2.5
(17)
STANLEY
Stanley Brad Nailer
Format 5/8"-1"
Article #0305324
Model #TRE650
★★★★★ ★★★★★
1.4
(8)
BOSTITCH
Stanley Heavy Duty Hammer Tacker - Full Rubber Grip - Black/Yellow - 12-in L
Article #0277009
Model #PHT150C
★★★★★ ★★★★★
2.7
(7)
RAMSET
Power Load In Strip
Format CAL.27xBT/100
Article #2293131
Model #C4RS27
★★★★★ ★★★★★
0
(0)
STANLEY
"SharpShooter Plus" 3-in-1 Staple Gun
Article #0305283
Model #TR250
★★★★★ ★★★★★
1.9
(14)
RAMSET
Drive Pins
Format 2 1/2"xBT/100
Article #2293154
Model #1516SDC
★★★★★ ★★★★★
0
(0)
RAMSET
Power Load
Format CAL.22xBT/100
Article #2293129
Model #C32CW
★★★★★ ★★★★★
5
(2)
RAMSET
DRIVE PINS
Format 3"xBT/100
Article #2293155
Model #1524SDP
★★★★★ ★★★★★
0
(0)
RAMSET
DRIVE PINS
Format 2"xBT/100
Article #2293147
Model #1514
★★★★★ ★★★★★
0
(0)
RAMSET
Drive Pins
Format 1 1/4"xBT/100
Article #2293153
Model #1510SD
★★★★★ ★★★★★
0
(0)
ARROW
Glue Sticks - All-Purpose - 10" - Clear - 12/Pk
Format 10"XBT/12
Article #0012055
Model #AP10
★★★★★ ★★★★★
4.7
(24)
RAMSET
Power Load In Strip
Format CAL.27xBT/100
Article #2293130
Model #C3RS27
★★★★★ ★★★★★
0
(0)

Does it come with the staplers?

Asked by: Karen1234566
Hello, This hammer tacker uses Arrow T50 staples in 5/16", 3/8" and 1/2" leg lengths. Staples are not included with the tool. Hope this helps. -- Your Arrow Fastener Team
Answered by: Arrow Product Expert
Date published: 2020-07-29
  • y_2022, m_5, d_17, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_CA, sid_0012004, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Heavy-Duty Staple Hammer is rated 4.7 out of 5 by 1213.
Rated 4 out of 5 by from Design is a painful clearing jams Got through the first box of 5000 staples just fine, but by the 2nd box it started jamming pretty frequently, which highlighted a major flaw. It's supposed to be easy to clear jams, but you need a screwdriver and a socket(and ideally a 3rd hand) to remove the pin to disassemble it. Got old pretty quick. What were they thinking? The cheaper HT55 has a removable pin that pops out of the side without any tools. I ended up replacing the bolt with a 3/16 linch pin which is much more convenient, but I docked it one star for having to upgrade that part myself, and another for only making it halfway through one roof underlayment job before it started jamming every 5 minutes.
Date published: 2020-11-03
Rated 5 out of 5 by from No jams I've been through half a box (about 600 staples) and have not had a single jam. This was done while attacking 6 mil poly to pressure treated wood. Works for me!
Date published: 2014-08-24
Rated 4 out of 5 by from Good tool box item I've used the same one for years, (since '04 I believe). Very durable as I slung it nearly half a block after smashing my finger worse than it's ever been smashed with this thing and eventually retrieved it unscathed. On the bright side, it was out of staples. On the down side, it has a low staple capacity. Still a good item to have around.
Date published: 2010-12-20
Rated 5 out of 5 by from I use this product for everything [This review was collected as part of a promotion.] The only down side from this product is that it only holds 1.5 clips of Staples and some models hold 2 full clips.the main reason I choose it is because the "head" is bigger allowing it to hang in a hammer loop on my tool belt while other.."nicer" more expensive models are thin and fall right thru.the staple capacity is an issue tho.in the mill I use this and it doesn't matter because I put the half clip on the work bench.but in the field I have to keep the half clips separate which is a pain in the but.i still love it tho.i have FOUR of them in my Jeep right now. Great product
Date published: 2018-09-16
Rated 5 out of 5 by from Time to step up [This review was collected as part of a promotion.] Had the old rusty lever action stapler which had been with me over the years long before I knew of the existence of a Hammer Tacker. That trusty old tool was also an Arrow but as hard as it is to believe, it finally bit the dust. Held a respectful mourning period and when I found myself in the market for a tacker, there had been but one choice. Stay with what you know and that had been and probably always will be, another Arrow. I find myself thinking things like this is something I should have done years ago. Fast,efficient, quick beyond belief. I was done with installation and ready to keep going. Great tool, with superb value for money.
Date published: 2018-09-21
Rated 4 out of 5 by from Roofing use Over all a decent product and easy to load, but handle design could use some help so you don't smack your knuckles every so often, and a smoother or rounded edge on striking surface would be easier on light weight materials like masking paper, 15 weight felt paper, etc
Date published: 2015-10-23
Rated 5 out of 5 by from Excellent Hammer Tacker [This review was collected as part of a promotion.] This Hammer tacker (the HT50), is one of the best ones I've seen or used. My dad has used his for years, and multiple coworkers in construction use it. About 2-3 weeks ago I bought my first hammer tacker. For something compact that I can stick in my back pocket, I chose the HT55 slim hammer tacker, but alas, after only about 2.5 weeks of occasional moderate use, the hinge-pin sheared off and the entire staple carriage fell out. Thankfully, I was able to bring it back to Home depot and get it replaced with the HT50. Super excited for my new purchase! (Promo code 1117)
Date published: 2018-10-11
Rated 3 out of 5 by from Difficult to Aim It may sound silly, but the tip of this stapler is over an inch wide, but you're shooting a staple that is less than half the width. As a result, if you are stapling something like chicken wire, it is extremely easy to miss the target--particularly if you have to swing hard to try to sink the staple into a tough material like treated wood. I thought of painting a line on the center of the tip, but I was close to finished on my project so I did not.
Date published: 2013-04-08
  • y_2022, m_5, d_17, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1213
  • loc_en_CA, sid_0012004, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store