Pivoting Steel Rivet Tool - 360°

Article #0012092 Model #RHT300 Format360DG
Pivoting Steel Rivet Tool - 360°
 

Description

The Arrow® rivet tool is equipped with a 360° rotating head allowing the riveting at any angle and an extended nose for hard-to-reach places. All steel construction with comfortable vinyl grip. Uses 4 rivet sizes: 3/32'', 1/8 '', 5/32'' and 3/26''.

  • Unique twistable head
  • All steel construction
  • Hi-viz non slip grip
  • Extended nose for hard to get places

Technical specifications

Color/Finish Family :Black Application :Automotive, lawn furniture, heading ducts, gutters, metal work, canvas Case Included :No Package Contents :RHT300, 4 different size nose pieces, nose changing wrench Riveter Sizes :3/32-In, 1/8-in, 5/32-in, 3/16-in Swivel :Yes Warranty :Limited lifetime

You may also like

ARROW
Arrow Heavy-Duty T-50 Staple Gun
Article #0012002
Model #T50
★★★★★ ★★★★★
4.7
(7436)
ARROW
3/8-in. staples
Format 3/8"x5000BX
Article #0012114
Model #506 IP
★★★★★ ★★★★★
4.9
(30)
RAMSET
Power Load
Format CAL.22xBT/100
Article #2293125
Model #C42CW
★★★★★ ★★★★★
5
(1)
RAMSET
TRIGGER TOOL
Format 0.22GA
Article #22935182
Model #45100
★★★★★ ★★★★★
0
(0)
BOSTITCH
Bostitch Hammer Tacker - 1/4-in to 3/8-in
Article #00277419
Model #BHT150C
★★★★★ ★★★★★
0
(0)
ARROW
Arrow 3/8-in Staples for T50
Format 3/8"xPK1250
Article #0012029
Model #50624
★★★★★ ★★★★★
5
(1)
ARROW
Arrow T50 1/2-in Staples - Steel - 5,000-Pack
Format 1/2"xBX5000
Article #00125090
Model #508IP
★★★★★ ★★★★★
4
(1)
RAMSET
Drive Pins
Format 2 1/2"xBT/100
Article #2293148
Model #1516
★★★★★ ★★★★★
0
(0)
BOSTITCH
Bostitch 2-in-1 Electric Staple and Nail Gun - 8-in Cord
Article #00277427
Model #BTE550Z
★★★★★ ★★★★★
1
(1)
CRAFTSMAN
CRAFTSMAN Light Duty Steel Staple Gun
Article #00277426
Model #CMHT82644
★★★★★ ★★★★★
1
(2)
BOSTITCH
Bostitch Manual Heavy-Duty Staple and Brad Gun
Article #00277433
Model #BT160HL
★★★★★ ★★★★★
0
(0)
ARROW
T50 1/2-in Heavy-Duty Staples (1,250-Count)
Format 1/2"XPK/1250
Article #0012030
Model #50824
★★★★★ ★★★★★
4.8
(5)
BOSTITCH
Bostitch 4-in-1 Multi-Tacker - Yellow
Article #00277424
Model #BTHT80277
★★★★★ ★★★★★
0
(0)
ARROW
Arrow T50 5/16-in Heavy-Duty Staples 5000-Count
Format 5/16"xBX5000
Article #0012113
Model #505IP
★★★★★ ★★★★★
0
(0)
RAMSET
DRIVE PINS
Format 3"xBT/100
Article #2293149
Model #1524
★★★★★ ★★★★★
0
(0)
ARROW
JT21 Light-Duty Staple Gun
Article #00125083
Model #JT21CM
★★★★★ ★★★★★
4.8
(3301)
RAMSET
HAMMER TOOL
Format 0.22GA
Article #22935181
Model #45000
★★★★★ ★★★★★
4.8
(4)
CRAFTSMAN
CRAFTSMAN Pushfire Light Duty Reverse Squeeze Staple Gun
Article #00277425
Model #CMHT82642
★★★★★ ★★★★★
0
(0)
BOSTITCH
Bostitch Heavy Duty Staple Gun
Article #00277418
Model #BT110
★★★★★ ★★★★★
0
(0)
ARROW
T50 3/8-in Heavy-Duty Stainless Steel Staples (1,000-Count)
Format 3/8"xPK/1000
Article #0012165
Model #506SS1
★★★★★ ★★★★★
0
(0)
RAMSET
Drive Pins
Format 2 1/2"xBT/100
Article #2293154
Model #1516SDC
★★★★★ ★★★★★
0
(0)
STANLEY
Bostitch Anti-Vibe Manual Hammer Tacker
Article #00277432
Model #BTHTHT550
★★★★★ ★★★★★
0
(0)
ARROW
T50 Professional Hammer Tacker
Article #0012004
Model #HT50-10
★★★★★ ★★★★★
4.7
(1235)
RAMSET
Power Load
Format CAL.22xBT/100
Article #2293129
Model #C32CW
★★★★★ ★★★★★
5
(1)
ARROW
Glue Sticks - All-Purpose - 10-in- Clear - 12/Pk
Format 10"XBT/12
Article #0012055
Model #AP10
★★★★★ ★★★★★
5
(1)

i'm new to rivets... is 3/16 the ONLY size this tool will set, or the MAXIMUM size? thanks much.

Asked by: plutek
talking to myself here... :) i just looked on the Arrow website, and found that this tool takes 1/8, 5/32, and 3/16 size rivets. i would suggest that the description above should be amended to make that clear.
Answered by: plutek
Date published: 2019-04-27

Is this tool for aluminum and steel rivets? i have to install about 10 pcs 3/16| steel. The tool i have currently does not work for that size.

Asked by: Took a Chevy
  • y_2024, m_4, d_18, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_CA, sid_0012092, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 3ms
  • QUESTIONS, PRODUCT
Pivoting Steel Rivet Tool - 360° is rated 3.4 out of 5 by 192.
Rated 1 out of 5 by from Steel construction? A piece of wood is stronger! I bought this riveter some time ago 'cos it looked good and I thought the rotating head was a good idea. When my father in law backed his car into my garage door I thought I had the ideal tool to replace the damaged rivets. How wrong can you be!! Having straightened out the door I began reassembly. On the first rivet the head split longitudinally in three places leaving the rivet totally unscathed. The casting quality is good but the metal used isn't. If a replacement head is available, I will replace it and keep the thing for light work - I still like the rotating head.
Date published: 2012-08-19
Rated 2 out of 5 by from Good tool, poor quality control Ordered the Tool online, and received it today. While I didn't have an immediate project requiring its use, I was anxious to try it out and compare to another rivet gun I have successfully used at another location. When I opened the package, A loose small nylock hex jam nut fell out; and the tool did not work. Upon further inspection, it became obvious that the nut was not attached to the pull rod needed for the tool to work. After about 1 1/2 hours (and with a good set of tools) I was able to disassemble, attach the nut, and reassemble the unit. It then worked properly. Hopefully it will continue to do us when I begin project work. I do like the swivel head feature, and long lever arms.
Date published: 2018-05-26
Rated 4 out of 5 by from Great for some tight spots Needed a rivet tool to install a shelf on my smoker. I was able to get get this into the area and insert the rivets. It comes with pretty much every size of rivet insert that you should ever need. The only complaints that I may have, is that with the short overall length. It does take a little bit of force to get it done. Yes the young generation might be able to handle it with ease, us older folks may have to use both hands. THe other would be, that I wish it would have come with an assortment of rivets. If it would have, I probably could have completed my task with those, instead of having to buy a large variety package.
Date published: 2021-01-01
Rated 1 out of 5 by from RHT 300 Swivel head Rivet gun Had a small job to rivet on a hinge, could not figure out why I couldn't set the rivet. noticed the gun split down the center of the housing. Left me with half of a job not done. The gun has been used less then 20 times. Reviewed the specs on the gun and was very disappointed to see the call out the gun is all steel construction when obviously the housing is made of cast aluminum. Seems like a total misleading spec callout. Thought I was buying the top of the line rivet gun, turns out spent way to much money on a very large disappointment. If you need a gun to rivet everyday for professional use, do not purchase this unit.
Date published: 2017-05-16
Rated 1 out of 5 by from Failed after only a handful of rivets... Bought this unit because it had the most features of all the rivet guns on the shelf but more importantly the Arrow name...sadly disappointed only the second time I needed to use it. Will not grip any size rivet, I tried 3 different sizes and none will compress. Have tried and tried to adjust, using every tip and trick I could find and still nothing. I own several Arrow staplers (cable, tack and a T50) all are excellent quality and have never had an issue until this rivet gun. Cannot recommend this model based solely on its durability.
Date published: 2018-05-15
Rated 2 out of 5 by from Swivel idea is good but poor quality This appeared to be a quality tool and has a good feel. The swivel head is a good idea. I'd run approximately 12 aluminum nail 1/8" rivets through it with no issues. Switched to a 3/16" steel nail rivet. First off, even after lubing the riveter, it took nearly all the strength I had to pop the rivets. On the third rivet, the head split down the middle on the end, almost all the way to the nose. Additional smaller splits are also present on the sides of the head about 3/"8 back from the end face (the the large split is).The body of the head needs to be thicker or something other than what appears to be cast aluminum/zinc.
Date published: 2018-01-20
Rated 4 out of 5 by from Great tool [This review was collected as part of a promotion.] This is a great tool to have if you ever need a rivet tool. The swivel function is an excellent feature because sometimes you have to set a rivet in a spot where a standard rivet tool would deem next to impossible. The storage of the different size heads right on the tool is a great idea and makes things a lot easier than having to look through your toolbox for them. This rivet tool is easy to use and functions the way you would expect except once in a while the shank binds up and is hard to release. But overall this is a great rivet tool and I would recommend it.
Date published: 2019-11-20
Rated 2 out of 5 by from Loss of Grip on 3/16 Aluminum Rivets I've used this product for a couple of years, mostly with 1/8 rivets and never ran into problems. But I've had a project this week that has included use of 3/16 aluminum rivets. It has become extremely difficult to get a good enough grab on the rivet shaft to pull the material together and finish the rivet - the gripper inside the gun just slips. I'm suspecting that aluminum is collecting on the serrations inside the 'gripper' but I have no way of checking or cleaning this up. To finish my project, I'll need to purchase another gun, but probably not this one.
Date published: 2017-05-19
  • y_2024, m_4, d_18, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_192
  • loc_en_CA, sid_0012092, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 2ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store