Belt Sander - 120 V - 6 A

Article#19835531 Model#7510-01 Format3x18"x6AM
Belt Sander - 120 V - 6 A
 

Description

Sands any type of wood surface. Micro-filtration captures and contains fine dust particles. Auto track belt alignment keeps belt centered. Soft-grip design for added comfort and control. Edge sanding with precision. On/off switch with lock-on. Pressure control technology warns user when excessive pressure is applied.

You may also like

BOSCH
Dual-Mode Electronic Random Orbit Polisher - 6"
Article #330609785
Model #1250DEVS
★★★★★ ★★★★★
0
(0)
MAKITA
7.8-A Belt Sander
Format 3x24"x7.8A
Article #1197018
Model #9924DB
★★★★★ ★★★★★
0
(0)
WAGNER
Paint Remover - Oribtal - OneStep(TM)
Article #49195123
Model #0513040
★★★★★ ★★★★★
3.7
(66)
BLACK & DECKER
Finishing Sander - 1.2 A
Format 1.2A
Article #00275407
Model #7558O-CA
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Random Orbit Sander/Polisher - 6"
Article #330609786
Model #ROS65VC-6
★★★★★ ★★★★★
0
(0)
BLACK & DECKER
1/4 Sheet Sander - 1.5 A
Format 1.5AM
Article #00275905
Model #BDEQS15C
★★★★★ ★★★★★
3.8
(5)
CRAFTSMAN
Random Orbital Sander - 5" - 3 A - 12,000 OPM
Format 5"x3AM
Article #00276574
Model #CMEW231
★★★★★ ★★★★★
4.8
(39)
CRAFTSMAN
Random Orbital Sander - V20 - Cordless - 12,000 OPM
Format 20V
Article #00276547
Model #CMCW220B
★★★★★ ★★★★★
3.8
(11)
BOSCH
Random Orbit Sander/Polisher - 2.5 A - 5''
Format 5"x2.5AM
Article #19835934
Model #ROS20VSC
★★★★★ ★★★★★
4.7
(121)
BLACK & DECKER
1/4 Sheet Sander - 2 A
Format 2AM
Article #00275931
Model #BDEQS300
★★★★★ ★★★★★
3.9
(77)
DEWALT
Magnesium Sander - 1 Speed - 2.4 A
Format 2.4AM
Article #00275895
Model #DWE6411
★★★★★ ★★★★★
3.8
(5)
BOSCH
Bosch Random Orbit Sander/Polisher - 5"
Article #330622810
Model #3725DEVS
★★★★★ ★★★★★
0
(0)
MAKITA
3-A Sander
Format 5"x3AM
Article #11975219
Model #BO5030
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Large Belt Sander - 4" x 24" - 1200 W
Article #330668682
Model #T41200BS
★★★★★ ★★★★★
1
(1)
DEWALT
Orbital Sander - 5" - 2.4 A
Format 5"x2.4AM
Article #00275896
Model #DWE6421
★★★★★ ★★★★★
4.4
(12)
MAKITA
Set of 2 Sanders
Format 2PCx3-1.6AM
Article #11975277
Model #DK1129
★★★★★ ★★★★★
4
(1)

Technical specifications

Voltage :120 V Component :Aluminum/plastic Amperage :6 A Revolutions per Minute :1,050 Charge Time :n/a Speed :1 speed Belt Size :3" x 18 Included :80-grit sanding blade Power Source :Electric
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Belt Sander - 120 V - 6 A is rated 3.7 out of 5 by 147.
Rated 2 out of 5 by from Nice idea but epic fail! Ok, first the good... The pressure lights are cool and help you know when using too much force. The bad part is the filter trap. There is no way to get the dust out but bang it or use a shop vac, which was working great. So about 20 mins into sanding it was time to empty the dust catch AGAIN and this time it was so hot that the glue that holds the filter together had liquified and dripped all down in the filter clogging up a good 25%. Not to mention the shop vac sucked the filter right off, lol. Gotta bring this bad boy back, would have been a winner if not for Skill getting too cute with the filter canister idea, stick with a simple bag please next time SKILL.
Date published: 2013-12-01
Rated 4 out of 5 by from Does The Job I don't know what all the negative reviews are about, or what people were expecting of this product. If you spend this kind of money for a belt sander, expectations should be relevant. I used it to smooth trim all around on a deck I had to rebuild. It handled pressure treated lumber with a 40 grit belt with no problem...no overheating, no "chewing up" the belt. I did wind up taking off the dust catcher so I didn't have to continually empty it as I was outside. Otherwise, I wouldn't hesitate to recommend this product to a friend depending on what their needs are. Very good product for the price.
Date published: 2016-06-10
Rated 4 out of 5 by from gets the job done. 2nd week owning this belt sander. in the competition of course black and decker is an absolute NO many bad expreinces with that name. however. this sander has some backdraws. 1 you will need an air compressor too blow the excess saw dust out. why? it tends too clog then the saw dust is all over the floor please note this is a must for this sander, i blow it out every time the canister is full. 2nd is. the adjustment tab has a tendency too ride on the sand paper this is an easy fix, just pop the bottom open and pull the sharp tabs away from where there paper rides. other than that it does the job very well.
Date published: 2015-08-18
Rated 1 out of 5 by from DO NOT BUY THIS Unless of course you have an unlimited about of belts. Bought this product about an hour ago. I intend to return it tomorrow. After 20 minutes of use, the sander started to eat the belt. I thought maybe it was just something wrong with that particular belt so I changed it. Turns out it was the sander. It ate three more belts. I intend to return the product and get a refund for the belts. Absolutely worst sander on earth.
Date published: 2012-09-09
Rated 1 out of 5 by from Worked fine for a month, then it just stopped I bought this belt sander at the end of November. It worked fine for 4 weeks through light to moderate use. I was happy with it, I would use it for 2-3 hours at a time without issue. Then one day I had used it for about 10 minutes and it just stopped. I would pull the trigger, the green light would come on, but the sander wouldn't run at all. I looked at the manual to see if there was some sort of fuse or something that would cause this, but didn't find anything in the manual to that effect. I returned it to Lowes and bought a more expensive sander that I hope works for a lot longer than this one did.
Date published: 2018-01-08
Rated 5 out of 5 by from I love this belt sander!! I purchased this to do the few inches around the walls that the Drum Sander couldn't reach. I used a 36 grit belt because there were multiple layers of paint on the floors. It was taking it off in seconds!!! I was so amazed because my palm sander was taking forever! I did not have any issues with the belt being chewed up. The dust canister had to be emptied a few times but to me I'm not complaining about that because it's doing its job and collecting dust! It would get slightly hot but still able to touch it. I love the feature of being able to lock it into the on position so you don't have to hold the button down and can have a firmer grip. I am so happy with this product!
Date published: 2017-10-18
Rated 1 out of 5 by from Taking it back You do get what you pay for. This u it kicks the belt into itself even after adjusting the side screw carefully. I use a shop vac attachment to keep the dust down. With the unit that comes with as a dust collector, it seems like the dust is being drawn into the motor. Eats belts. Went through 3 today, that's it! Going back. Used it three times!
Date published: 2015-11-10
Rated 1 out of 5 by from The belt alignment adjuster is junk The belt adjuster is junk. Tears up belts. Front pulley started slinging grease. Spend more money and by a better brand.
Date published: 2013-11-29
  • y_2019, m_6, d_25, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_147
  • loc_en_CA, sid_19835531, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store