Bench Bracket

Article#8064048 Model#14300 Format40x16x2 1/2"
Bench Bracket
 

Description

Bench bracket. For use on decks, balconies and docks. Simple and useful, uses only 5 in. of deck floor space. Installation screws included. Made of steel. Black. Available also in kaki or cedar colour.

Technical specifications

You may also like

Deck Adjustable Support - 3x3 to 6x6'', Steel - Black
Format 3x3"-6x6"
Article #80645132
Model #12098
★★★★★ ★★★★★
0
(0)
PYLEX
Aluminum Stair Riser - 4 Steps - 7.5" x 10.25" - Black
Format 7.5x10.25"
Article #80645158
Model #16034
★★★★★ ★★★★★
0
(0)
2x4 Rack Structure - 16"
Format 2x4"
Article #80645098
Model #12060
★★★★★ ★★★★★
4
(1)
FIXPLAK
Fixing Base
Format 4x4"
Article #80645103
Model #13062
★★★★★ ★★★★★
5
(1)
PYLEX
3-STEP STRINGER
Article #8064016
Model #13903
★★★★★ ★★★★★
1
(1)
PYLEX
Aluminum Stair Riser - 3 Steps - 7.5" x 10.25" - Black
Format 7.5x10.25"
Article #80645157
Model #16033
★★★★★ ★★★★★
0
(0)
PYLEX
2-STEP STRINGER
Article #8064015
Model #13902
★★★★★ ★★★★★
5
(2)
PYLEX
Aluminum Stair Riser - 5 Steps - 7.5" x 10.25" - Black
Format 7.5x10.25"
Article #80645159
Model #16035
★★★★★ ★★★★★
0
(0)
PYLEX
Aluminum Stair Riser - 2 Steps - 7.5" x 10.25" - Black
Format 7.5x10.25"
Article #80645156
Model #16032
★★★★★ ★★★★★
0
(0)
PYLEX
4-STEP STRINGER
Article #8064017
Model #13904
★★★★★ ★★★★★
2.5
(2)
PYLEX
1-STEP STRINGER
Article #8064014
Model #13901
★★★★★ ★★★★★
3.3
(3)
PYLEX
Aluminum Stair Treads - 11" x 42" - Black
Format 11"x42"
Article #80645167
Model #16142
★★★★★ ★★★★★
0
(0)
PYLEX
Aluminum Stair Treads - 11" x 48" - Black
Format 11"x48"
Article #80645168
Model #16143
★★★★★ ★★★★★
5
(1)
PYLEX
Aluminum Stair Riser - 6 Steps - 7.5" x 10.25" - Black
Format 7.5x10.25"
Article #80645160
Model #16036
★★★★★ ★★★★★
2
(1)
PYLEX
5-STEP STRINGER
Article #8064055
Model #13905
★★★★★ ★★★★★
1
(4)
PYLEX
6-STEP STRINGER
Article #8064056
Model #13906
★★★★★ ★★★★★
3.7
(3)
PYLEX
Aluminum Stair Treads - 11" x 36" - Black
Format 11"x36"
Article #80645166
Model #16141
★★★★★ ★★★★★
0
(0)
PYLEX
Aluminum Stair Riser - 7 Steps - 7.5" x 10.25" - Black
Format 7.5x10.25"
Article #80645161
Model #16037
★★★★★ ★★★★★
0
(0)
PYLEX
Aluminum Stair Riser - 4 Steps - 7.5" x 10.25" - White
Format 7.5x10.25"
Article #80645151
Model #16004
★★★★★ ★★★★★
0
(0)
PYLEX
Aluminum Stair Riser - 5 Steps - 7.5" x 10.25" - White
Format 7.5x10.25"
Article #80645152
Model #16005
★★★★★ ★★★★★
0
(0)
PYLEX
Aluminum Stair Riser - 1 Step - 7.5" x 10.25" - Black
Format 7.5x10.25"
Article #80645155
Model #16031
★★★★★ ★★★★★
0
(0)
PYLEX
Aluminum Stair Riser - 6 Steps - 7.5" x 10.25" - White
Format 7.5x10.25"
Article #80645153
Model #16006
★★★★★ ★★★★★
0
(0)
PYLEX
7-Step Stair Stringer - Black
Format 13x1.75x92"
Article #12665000
Model #13907
★★★★★ ★★★★★
3
(2)
PYLEX
Aluminum Stair Riser - 3 Steps - 7.5" x 10.25" - White
Format 7.5x10.25"
Article #80645150
Model #16003
★★★★★ ★★★★★
0
(0)
PYLEX
Aluminum Stair Treads - 11" x 42" - White
Format 11"x42"
Article #80645163
Model #16137
★★★★★ ★★★★★
0
(0)

How many do you need ie: 16 inch center 24"?

Asked by: giverr
Hello Sir, You will need one every 24" maximum span. Anything else, please let us know. Thanks
Answered by: Pylex Customer Services
Date published: 2019-07-11

How would you do the corner if you wanted to wrap the bench around the deck L shape.

Asked by: CarterApollo
Hello Sir, The easiest way is to finish the boards at 90 degree without any angle cut. The nicest way is to cut the boards at an combined angle just like the picture : http://pylex.com/content/photos/14300_Image_P1.jpg More difficult but look nicer. Anything else, please let us know. Thanks
Answered by: Pylex Customer Services
Date published: 2019-02-12

Is there a weight limit for the bench?

Asked by: LilyCat
Hello, We do recommand to use one Bench every 24", if properly installed with provided screws, the load bearing capacity is 150 lbs per brackets. Anything else, please let us know. Thanks
Answered by: Pylex Customer Services
Date published: 2018-08-21

Max distance between brackets?

Asked by: DSV04
24" according to the Pilex website.
Answered by: jslice
Date published: 2018-02-19

do these come with the screws and or bolts?

Asked by: Deck P
  • y_2020, m_10, d_28, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_CA, sid_8064048, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Bench Bracket is rated 3.7 out of 5 by 7.
Rated 1 out of 5 by from Garbage lag bolts, poorly engineered Bought these today, bought all the wood, cut and build supports under the deck and then came installation of the brackets. I was using my impact driver and sheared a bolt head. Ok, I switch to a drill, again sheared off...ok switched to a screwdriver SHEARED OFF. More zinc than steel I think. Secondly, the angles are not 90 degrees so you need to tighten them quite a bit to get them level, unfortunately, the junk hardware can't even withstand torque from a screwdriver so that's not happening unless you replace all the hardware, bring your cost up quite a bit. These are going back
Date published: 2019-06-30
Rated 5 out of 5 by from Easy to install and functions as advertised All parts came with the brackets. Installation was very quick and rock solid. In hindsight, if I could have used 8" boards for the back instead of 6" I think it would have looked nicer.
Date published: 2016-11-24
Rated 4 out of 5 by from Back support better than similar plastic brackets We bought this bracket after reading that the plastic one was harder to get a drill into the areas with the holes.... this was was straight forward. I feel it's more sturdy than the plastic one and like that it has the built in back support feather than having to cut a 2x4 for each one.
Date published: 2017-08-24
Rated 5 out of 5 by from Worked great. I installed the bench brackets about 1 month ago and they work great.
Date published: 2017-08-14
Rated 3 out of 5 by from Not quite right I found they were not square and almost impossible to get straight. If you use a level on the back the seat will be crooked and vice versa. The back is very upright and can be a bit uncomfortable because the bench is not very deep. They look good and the hardware they came with was adequate. It would be nice if the seat part was a bit deeper as fitting 2 2x6 boards in with a 1 inch gap is very difficult.
Date published: 2020-06-16
Rated 4 out of 5 by from Quick delivery. I ordered 21 brackets and 4 of them cane with a different style of hardware.... dark grey instead of black.... requiring a large Robertson head ( which I had to buy) instead of a hexagonal bolt driver which the others needed. Three of the largest screws twisted off during installation.... a proper pain! The finished deck benches are very sturdy and look fabulous.
Date published: 2020-09-04
Rated 4 out of 5 by from Love Exactly what we were looking for, the bolts that come with have rusted after just a couple weeks so do suggest using different ones
Date published: 2019-07-09
  • y_2020, m_10, d_28, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_CA, sid_8064048, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store