Bosch 4100XC-10 Worksite Corded Table Saw - 10-in - Gravity-Rise Wheeled Stand

Article #19836366 Model #4100XC-10 Format10"x15AM
Bosch 4100XC-10 Worksite Corded Table Saw - 10-in - Gravity-Rise Wheeled Stand
 

Description

This Bosch table saw has exceptional cutting capacity and is ideal for all jobsites. It features built-in storage for saw equipment and tools, and an ultra-resistant wheeled base for easy portability. The SquareLock rip fence glides along the rail with a single finger and locks at a precise level to ensure maximum cutting accuracy. The integrated sub-base protects the table saw from impacts and kickbacks, while the Constant Response start-up system is quiet, providing reduced torque while remaining powerful enough to ensure consistent cutting speeds. The riving knife prevents material from pinching the blade and ensures everything is positioned exactly right when performing upright cuts, non-through cuts and splitting tasks. Backed by a 1-year limited warranty.

Technical specifications

Cutting Depth :At 45°: 2 1/4-in (5.72 cm), at 90°: 3 1/8-in (7.94 cm) Bevel Capacity :-2° to 47° Cutting Capacity :Left: 8 1/2-in (21.59 cm), right: 30-in (76.2 cm) Height :13-in (33.02 cm) Utilization :Worksite Warranty :1-year limited warranty Color :Blue Amperage :15 A Arbor Size :5/8-in (1.59 cm) Model :Corded Blade Size :10-in (25.4 cm) Type :Table saw Weight :94 lb (42.64 kg) Voltage :120 V Width :27-in (68.58 cm) Revolutions per Minute :3650 RPM Length :32 1/2-in (82.55 cm)

You may also like

MAKITA
10-in Table Saw with Support
Format 10"x15AM
Article #11975246
Model #2705X1
★★★★★ ★★★★★
5
(1)
DEWALT
Dewalt Compact Jobsite Table Saw - 8 1/4-in Blade, 15 A
Format 8 1/4"
Article #00277225
Model #DWE7485
★★★★★ ★★★★★
4.7
(80)
DEWALT
Dewalt Table Saw with Rolling Stand - 10-in - 15 A
Format 10"x15A
Article #00275708
Model #DWE7491RS
★★★★★ ★★★★★
4.7
(603)
DEWALT
Tile Saw - 10" - 15 A
Format 10" 15AM
Article #00275767
Model #D24000S-A
★★★★★ ★★★★★
4.8
(28)
METABO HPT
Metabo HPT Jobsite Table Saw with Rolling Stand - 10-in - 15 A
Format 10"x15A
Article #37815184
Model #C10RJSM
★★★★★ ★★★★★
4.5
(270)
METABO HPT
Metabo HPT 36 V Table Saw - 10-in - Cordless
Format 10"x36V
Article #37815211
Model #C3610DRJQ4M
★★★★★ ★★★★★
4.6
(45)
DEWALT
Dewalt Compact Table Saw - 10" - 15 A
Format 10"x15A
Article #00275707
Model #DWE7480
★★★★★ ★★★★★
4.7
(545)
CRAFTSMAN
Craftsman 10-in Carbide-Tipped Blade Table Saw
Format 10"x15AM
Article #97925013
Model #CMXETAX69434502
★★★★★ ★★★★★
3.9
(207)
BOSCH
Worksite Table Saw with Wheeled Stand - 10"
Format 10"x15AM
Article #19836270
Model #4100-10
★★★★★ ★★★★★
4.8
(51)
DEWALT
Compact Table Saw - 10" - 15 A
Format 10"x15A
Article #0027593
Model #DW745
★★★★★ ★★★★★
4.7
(128)
BOSCH
Portable Table Saw - 10" -15 A
Format 10"x15AM
Article #19835506
Model #GTS1031
★★★★★ ★★★★★
3.6
(14)
KOBALT
Kobalt 15 A Portable Table Saw - Carbide-Tipped Blade - 10-in
Format 10"x15AM
Article #41095003
Model #KT10152
★★★★★ ★★★★★
4.1
(189)

where do I find a new rip fence

Asked by: jim j
  • y_2021, m_6, d_21, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_CA, sid_19836366, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Bosch 4100XC-10 Worksite Corded Table Saw - 10-in - Gravity-Rise Wheeled Stand is rated 4.2 out of 5 by 22.
Rated 2 out of 5 by from Plastic gears This is a great portable job site saw in almost every way but one. It’s a pretty big one though. The gears used to raise and lower the blade are made of plastic and WILL break, rendering the saw entirely useless. If they had just made these gears out of metal I would give this saw a five star review.
Date published: 2020-07-10
Rated 5 out of 5 by from Acurate out of the box I got this saw after using an old craftsman that was hard to dial accurate. This saw is a complete difference. I only had to make a couple adjustments like tightening the fence, but didnt have to make any measurment changes. Im getting confident that i only check the fence diference every 5-10 times just to make sure. Being able to move from place to place and store it easily is a hige advantage with all the tools secure to the saw makes it easy to have. Imo i like this fence better than the dewalt saw.
Date published: 2020-10-12
Rated 5 out of 5 by from Just What I Needed I bought the saw to do a major remodel on my home. I've used it to rip Hardie, plywood, 2x material, PVC boards and such. The built in fence measurement is off about 1/32" but close enough for most things I'm doing to just set it and go. The fence extension and measurement system is also about the same accuracy. Removing the guard and kickback is relatively easy as well as lowering the kerf knife to create joinery. The portability is very useful. I've been very careful when I move it not because it doesn't appear rugged but just because it's a precision device that should be cared for. I did drop it out of my Tundra when attempting to unload it by myself and it survived just fine.
Date published: 2020-12-19
Rated 5 out of 5 by from This product was good out out of the box. It was a pleasant surprise to do no adjustments. The extra wide rip size has already helped. I bought this one because the dewalt was not available in my area or online, I have no regrets as of yet.
Date published: 2021-03-23
Rated 5 out of 5 by from Bosch 4100xc table saw - EXCELLENT! I bought the Bosch 4100xc table saw to replace a Delta job site saw that was only five years old but was inaccurate and had a broken, non-fixable fence that Delta has yet to replace. For me, the selection was between this Bosch saw and the DeWalt 7491rs which is also very highly rated. Frankly, it was a difficult choice. I liked the rack & pinion fence of the DeWalt but not its cart design. The Bosch, I think, has better build quality, a better stand that is much easer to move around my small shop, and the fence while not rack/pinion is quite good and very accurate. Since I bought it, I have used to to rip and cross cut 1-1/2 inch thick while oak using a Diablo blade I already had, and it worked though that test quite well. My concern about the rather low rpm rating (approx 3,800/min.) were blown away, as it seems to have lots of power to do the job. I do have two small complaints: (1) the miter gauge, while better than found on most similar table saws, is not up to the quality of the rest of the saw and is sloppy in the slots. I replaced it with better one from Rockler. (2) The dust collection is only fair, in my opinion. I think Bosch should find a better way to isolate the dust generation area so that more of it goes into the vacuum port. In total, I'm very pleased with the Bosch 4100xc. I am a woodworking hobbyist, and not a professional contractor, so it won't get used like the pros would but I think it can take day in/out usage just fine. I should add that I have other Bosch woodworking products (router, router table, sander, drill, jig saw) and am a happy customer of Bosh's products. I highly recommend this table saw.
Date published: 2021-03-14
Rated 2 out of 5 by from Great table saw After returning two dewalt table because their top was not straight, i decided to buy the bosch table saw. I feel that the table saw is great. Out of box no tuning required. The stand is very easy to open/close. I am using for hobby wood working and i am very happy with my purchase
Date published: 2020-10-11
Rated 5 out of 5 by from I replaced my 20 year old craftsman table saw with this almost state of the art Bosch. Absolutely no comparison. Right out the box and ready to go back to work. Almost no adjustments needed. Definitely a 5 star purchase.
Date published: 2021-03-30
Rated 3 out of 5 by from Well built table, sadly the motors do not last [This review was collected as part of a promotion.] I’ve owned the original 4100 and have had the motor repaired replaced three times in four years. I finally purchased this one and guess what... the motor burned up again. Not sure why Bosch says this is not a common issue, but I’ve had it happen to me enough times that it is an issue that they are not working to resolve.
Date published: 2020-08-01
  • y_2021, m_6, d_21, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_en_CA, sid_19836366, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store