Bosch Masonry Drill Bit - 3/8" x 6" - Carbon Steel

Article#19836323 Model#LBHX008 Format3/8x6"
Bosch Masonry Drill Bit - 3/8" x 6" - Carbon Steel
 

Description

This Bosch hexagonal shank hammer drill masonry bit has a 4 times greater lifespan than standard masonry drills. Its asymmetrical diamond-ground carbide bit delivers fast drilling and prevents damage to hammer drills and impact drivers that you use on a regular basis. The tip is specifically designed for precise starts and to reduce walking. The bit head features deep- cut spirals that let you quickly drill into block, masonry and concrete. This 3/8" x 6" drill bit is sold individually.

Technical specifications

Component :Carbon steel Length :6" (15.24 cm) Packaging :Each Diameter :3/8" (9.53 mm) Utilization :Brick, concrete, stone Type :Hex shank

You may also like

BOSCH
Glass and Tile Drill Bit - 1/4"
Format 1/4"
Article #19835551
Model #GT300
★★★★★ ★★★★★
1
(4)
BOSCH
CONCRETE DRILL BIT
Format 5/32x6"
Article #1983025
Model #HC2001
★★★★★ ★★★★★
3.6
(14)
BOSCH
Bosch Masonry Drill Bit - 3/16" x 6" - Carbon Steel
Format 3/16x6"
Article #19836320
Model #LBHX003
★★★★★ ★★★★★
5
(2)
BOSCH
Titanium-Coated Metal Drill Bit - 1/8'' x 2 3/4'' - 2-Pack
Format 1/8x2 3/4"xPK2
Article #13545442
Model #TI2135
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch-4-Piece Glass Tile Drill Bit Set
Format 4PC
Article #19835447
Model #GT2000
★★★★★ ★★★★★
3.3
(3)
BOSCH
Drill Bit for Glass and Tile - 5/16''
Format 5/16"
Article #19835552
Model #GT400
★★★★★ ★★★★★
0
(0)
BOSCH
Glass and Tile Drill Bit - 3/16"
Format 3/16"
Article #19835550
Model #GT200
★★★★★ ★★★★★
1
(1)
BOSCH
Cobalt Metal Drill Bit - 1/8'' x 2 3/4''
Format 1/8x2 3/4"
Article #19835213
Model #CO2135
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Masonry Drill Bit - 5/32" x 6" - Carbon Steel
Format 5/32x6"
Article #19836319
Model #LBHX002
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch® Wide Chisel Bit - 1 1/2"
Format 1/2x10"
Article #19835046
Model #HS1425
★★★★★ ★★★★★
4.9
(8)
BOSCH
Bosch Masonry Drill Bit - 5/16" x 6" - Carbon Steel
Format 5/16x6"
Article #19836322
Model #LBHX006
★★★★★ ★★★★★
4.5
(14)
BOSCH
Bosch Masonry Drill Bit - 1/2" x 6" - Carbon Steel
Format 1/2x6"
Article #19836324
Model #LBHX010
★★★★★ ★★★★★
4.3
(19)
BOSCH
Daredevil(TM) Standard Spade Bit - 1'' x 6''
Format 1"
Article #19835690
Model #DSB1013
★★★★★ ★★★★★
0
(0)
BOSCH
Square Insert Bit
Format #2x6"
Article #19835339
Model #CCSQ2601
★★★★★ ★★★★★
0
(0)
BOSCH
CONCRETE DRILL BIT
Format 3/16x6"
Article #1983026
Model #HC2011
★★★★★ ★★★★★
4.2
(17)
BOSCH
Daredevil(TM) Standard Spade Bit - 1 1/2'' x 6''
Format 1 1/2"
Article #19835692
Model #DSB1021
★★★★★ ★★★★★
0
(0)
BOSCH
Daredevil(TM) Standard Spade Bit - 1 1/4'' x 6''
Format 1 1/4"
Article #19835691
Model #DSB1017
★★★★★ ★★★★★
0
(0)
BOSCH
Square Insert Bit
Format #2x3"
Article #19835354
Model #SQ2301
★★★★★ ★★★★★
0
(0)
BOSCH
Daredevil Standard Spade Bit Set - 3 Pieces
Format 3PC
Article #19835693
Model #DSB5003
★★★★★ ★★★★★
0
(0)
BOSCH
CONCRETE DRILL BIT
Format 3/8x4"
Article #1983028
Model #HC2061
★★★★★ ★★★★★
4.2
(36)
BOSCH
Bosch Masonry Drill Bit - 1/8" x 3" - Carbon Steel
Format 1/8x3"
Article #19836318
Model #LBHX001
★★★★★ ★★★★★
1
(1)
BOSCH
Titanium-Coated Metal Drill Bit - 1/4'' x 4''
Format 1/4x4"
Article #13545450
Model #TI2143
★★★★★ ★★★★★
0
(0)
BOSCH
Daredevil Extended-Length Spade Bit - 1/2" x 16"
Format 1/2"x16"
Article #19835681
Model #DLSB1005
★★★★★ ★★★★★
0
(0)
BOSCH
Daredevil(TM) Standard Spade Bit - 3/4'' x 6''
Format 3/4"
Article #19835687
Model #DSB1009
★★★★★ ★★★★★
0
(0)
BOSCH
SDS+ Drill Bit
Format 3/16x6"
Article #1983161
Model #HC2012
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Bosch Masonry Drill Bit - 3/8" x 6" - Carbon Steel is rated 4.4 out of 5 by 31.
Rated 3 out of 5 by from Average at best I purchased this for a small project that required approximately 30 holes 1-1/2” deep. The first 6 holes were a breeze. I would drill 2 holes and let the bit cool for about 5-6 minutes while I inserted the sleeve anchors and sipped on my coffee. The second set of six were ok, towards number 10 I noticed that the bit was showing wear and it was taking a bit longer to get the holes done. By the time I finished with hole #16, the bit had completely rounded over, so there was no cutting surface to work the concrete. If 4x the life gets 16 holes at 1-1/2” then I can’t justify a recommendation nor anything better than an average rating. [This review was collected as part of a promotion.]
Date published: 2019-04-11
Rated 1 out of 5 by from MASONRY BIT Don't waste your money on this piece of crap. Spend twice the money a get a good bit. I drilled 3 holes in concrete 5" thick and burnt it up. [This review was collected as part of a promotion.]
Date published: 2019-10-11
Rated 1 out of 5 by from Doesn't last Drilling holes 3" thru concrete, with plenty of water: 1st hole went fine; 2nd hole was slower; 3rd hole wouldn't even drill; bit is shot.
Date published: 2020-05-24
Rated 5 out of 5 by from Masonry drill bit for SDS hammer drill Drill bit performed flawlessly. Cleared concrete material from bit while using quickly and without sticking or binding up in the hole being drilled. Bit ran true while drilling and appears to be of exceptional quality. I am very satisfied with my purchase and would purchase this brand (Bosch) again and I would also highly recommend to others. [This review was collected as part of a promotion.]
Date published: 2019-08-02
Rated 5 out of 5 by from One tough bit Bought this to drill into volcanic rocks, to fracture chunks off a large rock face. I basically abused the heck of it. I kept count and after drilling the first 50 holes, full depth, it was still going strong. I stopped counting after 50, but I still did plenty more after that. Worth every cent I paid. [This review was collected as part of a promotion.]
Date published: 2019-07-20
Rated 5 out of 5 by from Was able to use in my compact impact driver due to hex bit end to fit into tool, due to this the vibration from impact driver helped in drilling of the masonry. Thumbs up for the great thinking of the hex bit design to fit into such tools, the bit performed great [This review was collected as part of a promotion.]
Date published: 2019-03-18
Rated 5 out of 5 by from Sharp Bit This Bit bored 4 holes in a concrete wall with ease. I have tried other masonry bits, but the Bosch brand is the one I like the best. When it comes to drill bits you get what you pay for. [This review was collected as part of a promotion.]
Date published: 2019-03-18
Rated 5 out of 5 by from Masonry bit I needed to drill through the exterior wall of our house which is stone veneer. This bit worked great. I'm sure it has plenty of life left for the next project that arises. [This review was collected as part of a promotion.]
Date published: 2019-02-21
  • y_2020, m_7, d_8, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_31
  • loc_en_CA, sid_19836323, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store