Bosch T-Shank Diamond Grit Jigsaw Blades for Hard Tile - 3 1/4-in L x 1/32-in T - 30-TPI - Bi-Metal

Article #19835392 Model #T130DG Format3 1/4"x30GR
Bosch T-Shank Diamond Grit Jigsaw Blades for Hard Tile - 3 1/4-in L x 1/32-in T - 30-TPI - Bi-Metal
 

Description

Use the Bosch diamond blade to cut grade 5 porcelain, granite and marbles. It's compatible with most T-shank jigs saws for a superior performance. Made of diamond grit, the blade provides longevity and durability. The glass cutting saw blade has a length of 3 1/4 in and a working length of 2 1/4 in.

Technical specifications

Component :Diamond Length :3 1/4" Model :T Shank Utilization :Cut Grade 5 Porcelain, Granite, Marble, Slate, Glass, Cement 3/64" to 1/2" Thick Color :Black

You may also like

BOSCH
Bosch T-Shank Jigsaw Blades - 4-in - 10-TPI Reverse Pitch - Carbon Steel - 5 per Pack
Format 4"xPK5
Article #1983138
Model #T101BR
★★★★★ ★★★★★
4.4
(17)
BOSCH
Bosch T-Shank Jigsaw Blades - 4-in L - 10-TPI - High-Carbon Steel - 5 Per Pack
Format 4"xPK5
Article #1983132
Model #T101B
★★★★★ ★★★★★
4.8
(32)
CRAFTSMAN
Craftsman Jigsaw Blade Set - Assorted Lengths - T-Shank- High Carbon Steel - 13-Pack
Format 13PC
Article #00276593
Model #CMAJ1SET13
★★★★★ ★★★★★
4.7
(30)
BOSCH
Bosch T-Shank Clean Cutting Jigsaw Blades for Wood - 3 1/4-in L x 3/64-in T - 20-TPI - High-Carbon Steel - 5 Per Pack
Format 3 1/4"xPK5
Article #1983137
Model #T101AO
★★★★★ ★★★★★
4.5
(53)
DEWALT
DeWalt T-Shank Jigsaw Blades - Bi-Metal - Set of 10 - 1 3/4-in L
Format PK10
Article #00275605
Model #DW3741C
★★★★★ ★★★★★
4.7
(24)
BOSCH
Bosch T-Shank Jigsaw Blades - 12 TPI - High-Carbon Steel - 5 Per Pack - 4 5/8-in L
Format 4 1/2"xPK5
Article #19835230
Model #T308B
★★★★★ ★★★★★
4.5
(14)
BOSCH
Bosch T-Shank Jigsaw Blade for Wood - 4-in L x 3/64-in T - 8-TPI - High Carbon Steel - 5 Per Pack
Format 4"xPK5
Article #1983135
Model #T111C
★★★★★ ★★★★★
4.6
(9)
BOSCH
Bosch T-Shank Jigsaw Blade Set - 3 1/4-in x 1/16-in - 20-TPI - Bi-Metal - 3-Pack
Format CR3
Article #1983236
Model #T503
★★★★★ ★★★★★
4.8
(28)
BOSCH
Bosch Jigsaw Blade Kit- T-Shank - High-Carbon Steel - For Wood and Metal - Set of 5
Format PK5
Article #19835232
Model #T500
★★★★★ ★★★★★
4.5
(26)
BOSCH
Bosch T-Shank Jigsaw Blades - 3 5/8-in - 11-14 Progressive TPI - High-Speed Steel - 5 per Pack
Format 3 5/8"xPK5
Article #03855065
Model #T118B
★★★★★ ★★★★★
4.1
(16)
CRAFTSMAN
Craftsman Jigsaw Blade Kit - U-Shank - High-Carbon Steel - Set of 12
Format 12PC
Article #00276922
Model #CMAJ2SET12
★★★★★ ★★★★★
4
(24)
BOSCH
Bosch T-Shank Jigsaw Blades - 5-10 Progressive TPI - Bi-Metal - 5 Per Pack - 5 1/4-in L
Format 3 5/8"xPK5
Article #19835231
Model #T345XF
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch T-Shank Jigsaw Blades - 3 5/8-in - 17-24 Progressive TPI - High-Speed Steel - 5 per Pack
Format 3 5/8xPK5
Article #1983139
Model #T118A
★★★★★ ★★★★★
4.7
(19)
BOSCH
Bosch U-Shank Jigsaw Blades - Reverse Pitch - 10 TPI - High-Carbon Steel - 5 Per Pack - 3 5/8 in L
Format 3 5/8"xPK5
Article #19835144
Model #U101BR
★★★★★ ★★★★★
3.5
(2)
BOSCH
Bosch T-Shank Jigsaw Blades - 4-in L - 5-6- Progressive TPI - High-Carbon Steel - 5 Per Pack
Format 4"xPK5
Article #1983133
Model #T101D
★★★★★ ★★★★★
5
(1)
BOSCH
Bosch T-Shank Jigsaw Blades - 24 TPI - High-Speed Steel - 5 Per Pack - 5 13/64-in L
Format 5 1/4"xPK5
Article #03855067
Model #T318A
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Craftsman T-Shank Jigsaw Blades - 18 TPI - Bi-Metal - 2 Per Pack - 4-in L
Format 3 5/8"
Article #00276868
Model #2059068
★★★★★ ★★★★★
5
(1)
BOSCH
Bosch U-Shank Jigsaw Blades - 14 TPI - High-Speed Steel - 5 Per Pack - 4 in L
Format 4"xPK5
Article #19835223
Model #T101A
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch U-Shank Wood Cutting Jigsaw Blades - 3 5/8-in L x 1/32-in T - 8-TPI - High-Carbon Steel - 5 Per Pack
Format 3 5/8"xPK5
Article #19835379
Model #U111C
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch T-Shank Jigsaw Blades - 3 5/8-in - 36-TPI - High-Speed Steel - 5 per Pack
Format 3 5/8"xPK5
Article #1983140
Model #T118G
★★★★★ ★★★★★
4.6
(9)
CRAFTSMAN
Craftsman T-Shank Jigsaw Blades - 6 TPI - Bi-Metal - 2 Per Pack - 4-in L
Format 4"
Article #00276869
Model #2059069
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch T-Shank Jigsaw Blades - 36 TPI - Bi-Metal - 5 Per Pack - 3 1/4-in L
Format 3 1/4"xPK5
Article #19835224
Model #T118GFS
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Craftsman T-Shank Clean Wood Jigsaw Blade - 10 TPI - High-Carbon Steel - 3 5/8-in L - 2 Per Pack
Format 4"
Article #00277082
Model #CMAJ1410WC2
★★★★★ ★★★★★
5
(1)
BOSCH
Bosch T-Shank Flexible Jigsaw Blades for Metal - 3 5/8-in L x 3/64-in T - 17-24 Progressive TPI - Bi-Metal - 5 Per Pack
Format 3 5/8"xPK5
Article #03855069
Model #T118AF
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Bosch T-Shank Diamond Grit Jigsaw Blades for Hard Tile - 3 1/4-in L x 1/32-in T - 30-TPI - Bi-Metal is rated 3.8 out of 5 by 42.
Rated 4 out of 5 by from Did the Job for a single use cutting refractory Cut a three foot long by 3/4" thick panel of refractory to replace the back panel of a fireplace insert. It was essentially like cutting concrete. The blade did the job with a moderate to heavy amount of pushing effort applied, however since I used a jigsaw only a specific small area of the blade was engaged, once the job was complete, I would have had to buy a new one if further cuts would have been necessary. All in all, this blade did the job for a very demanding application, the finished cut was clean, a dust mask would be adviseable while cutting.
Date published: 2014-11-19
Rated 5 out of 5 by from Amazing! [This review was collected as part of a promotion.] I had been using a carbide grit hacksaw and decided I needed to try something else. I am cutting through hard ceramic based tile of sorts - not tile but ceramic based. Using this on a 2200spm 12v kobalt jig saw I've had forever, going very slowly, and spraying water on the blade every couple of seconds, so far I have cut over 20" and the diamonds are absolutely still bonded on the blade. After every few inches I stop and let the blade cool, scrub the blade with a nylon brush and then go again. This is working really well...just don't go too fast.
Date published: 2018-09-10
Rated 4 out of 5 by from Bosch Diamond Grit Jigsaw Blade I have very hard plaster walls and ceiling. They are like concrete. I am renovating and placing recessed lights in ceiling. The Bosch Diamond Grit Jigsaw blade slows down quickly after first hole but with some patience was able to finish cutting 7 holes in very hard plaster. Carbide grit blades last about 3 holes. Regular steel blades last one hole.
Date published: 2014-10-26
Rated 4 out of 5 by from use water I believe the blade is promoted for dry cutting. After an hour and a half of cutting I had cut 5/8 inch into the tile. By this time I had seen a lot of the diamond girt flake off the blade. I then started putting small amounts of water on the tile as I cut and cut 3 inches in the next hour. I am going to get another blade and use water from the get go.
Date published: 2015-03-11
Rated 4 out of 5 by from Good cutting blade but wears fast on tile [This review was collected as part of a promotion.] I used this for cutting corners and rounds out of floor tile. First dozen cuts were very good and smooth, but after a short time you could see the diamond wear off the part of the blade right below the shoe of the saw. It's a little expensive for such a quick wear, but I haven't found anything better. It makes complicated tile work much easier. Just plan on buying multiple in the budget if you're doing a large job.
Date published: 2015-09-21
Rated 5 out of 5 by from Wow, great blade Used to cut Hardie Board siding for a remodel job and it worked like a dream. Clean, quick cuts both for straight and notch cuts around exterior window trim. Way better than the circ saw even with a blade meant for cutting fiber cement siding. With the exception of long rip cuts, this is the best alternative if you don't want to spend $300 for the tool to score and snap the fiber cement siding.
Date published: 2017-05-19
Rated 4 out of 5 by from For a weekend project only. Purchased to cut Porcelain tile around a 5" control valve. I used a small spray bottle to keep water on the blade while cutting. Cuts very quickly and I was able to control the cut very well. I was surprised at the ease the blade cut through the Porcelain. Would have given it 5 stars however I believe the blade is spent. I was able to accomplish what I purchased it for. I believe that the blade should have lasted a bit longer given the fact that I kept it quenched.
Date published: 2016-07-20
Rated 5 out of 5 by from Good I used this blade in a Makita jigsaw. It cut easily through Hardi tile backer. For me, it was much easier than scoring and snapping the board. Since I had it out I decided to try cutting some 1/4" thick slate tile with it. It did not cut the slate as easily as a tile saw but, since I only had about 10 cuts to make, it was easier than hauling out and setting up the tile saw. The blade wanted to wander so I had to go slowly. All in all, it was a good purchase.
Date published: 2020-09-27
  • y_2022, m_5, d_26, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_42
  • loc_en_CA, sid_19835392, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store