Variable Speed Hammer Drill - 7 A - 1/2''

Article#1983278 Model#1191VSRK Format1/2"x7A
Variable Speed Hammer Drill - 7 A - 1/2''
 

Description

The new Bosch 1191VSRK 1/2'' (1.25 cm) VSR hammer drill has a powerful 7 A reversing motor which provides the highest performance to weight ratio in its class and 0-3,000 rpm. It also has an ergonomic design. All this means the 119VSRK is engineered to provide the highest performance to weight ratio in its class. Use the selector lever to choose the hammer drill for tough concrete. Smooth power transmission and extended tool life. Variable speed reversing switch to complete control for drilling, driving and removing bits or screws. Select drill only for steel, wood, or aluminum. Kit includes 360-degree handle, depth gauge, and carrying case. 1-year limited warranty.

Technical specifications

Type :Hammer drill Component :Metal/plastic Amperage :7 A Beats per Minute :0 to 48,000 Revolutions per Minute :0 to 3,000 Chuck :1/2 Speed :Variable/Reversible Warranty :1-Year Limited Power Source :Electric

Frequently bought together

YELLOW JACKET
6-Outlet Power Bar with Surge Protection - 6' - Yellow
Format 1.8M
Article #32045053
Model #5139NSP
★★★★★ ★★★★★
3
(2)
YELLOW JACKET
Single Outlet Portable GFCI Adapter - 1800 W - 15 A
Article #32045050
Model #14650013-6
★★★★★ ★★★★★
0
(0)
WOODS
12/3 Extension Cord - 25' - Red
Format 12/3 25'
Article #74045239
Model #1697SW0002
★★★★★ ★★★★★
0
(0)
BOSCH
Drill Bit Set - Daredevil - 10 Pieces
Format 10PC
Article #19835654
Model #DSB5010
★★★★★ ★★★★★
5
(1)
BOSCH
5-PC MULTI-CONST. DRILL BIT SET
Format 5PC
Article #19835461
Model #MC500
★★★★★ ★★★★★
5
(1)
BOSCH
7-pc concrete drill bit set
Format 7PC
Article #19835449
Model #HCBG700
★★★★★ ★★★★★
4.5
(2)

You may also like

BOSCH
Corded Drill-Mixer - 5/8" - 9.0 A
Format 5/8"x9.0AM
Article #19836315
Model #GBM9-16BN
★★★★★ ★★★★★
0
(0)
MAKITA
18V LXT Cordless VSR Drill
Format 1/2"x18V
Article #11975347
Model #DDF453SYE
★★★★★ ★★★★★
2
(1)
MAKITA
Drill, mixer and bowl trio
Format 1/2"x6.5AM
Article #11975278
Model #DS4011X
★★★★★ ★★★★★
0
(0)
MAKITA
8.5-A Drill and mixer
Format 1/2"x8.5AM
Article #11975221
Model #DS4011
★★★★★ ★★★★★
0
(0)
MAKITA
Cordless Hammer Drill with XPT - 18 V
Format 1/2"x18V
Article #11975324
Model #DHP458Z
★★★★★ ★★★★★
0
(0)
BOSCH
Drill/Driver Kit - 1/2" - 2 18V SlimPack Batteries
Format 1/2"x18V
Article #19836264
Model #GSR18V-190B22
★★★★★ ★★★★★
4.4
(22)
MAKITA
Hammer Drill Kit - 1/2"
Format 1/2"x6AM
Article #11975408
Model #HP1641K
★★★★★ ★★★★★
0
(0)
MAKITA
Cordless Brushless Impact Driver - 1/4" - 18 V
Format 1/4"x18V
Article #11975404
Model #DTD153Z
★★★★★ ★★★★★
0
(0)
MAKITA
18 V Brushless Drywall Screwdriver
Format 1/4"x18V
Article #11975399
Model #DFS452Z
★★★★★ ★★★★★
0
(0)
BOSCH
Freak Impact Driver Kit - 1/4" and 1/2" - 18 V
Format 18V
Article #19836295
Model #GDX18V-1600B12
★★★★★ ★★★★★
4.2
(73)
BOSCH
Freak Impact Driver 2-in-1 Kit - 1/4" and 1/2" - 18 V
Format 18V
Article #19836300
Model #GDX18V-1800CB15
★★★★★ ★★★★★
4.1
(7)
MAKITA
6.5-A Drywall Screwgun
Format 1/4"x6.5AM
Article #11975212
Model #FS4000
★★★★★ ★★★★★
0
(0)
BOSCH
Cordless Hammer Drill - 1/2" - 18V
Format 1/2"x18V
Article #19836302
Model #GSB18V-535CB15
★★★★★ ★★★★★
4.8
(6)
BOSCH
Cordless Hammer Drill - 1/2" - 18 V Lithium-Ion
Format 1/2"x18V
Article #19836304
Model #GSB18V-755CN
★★★★★ ★★★★★
0
(0)
BOSCH
SDS-plus(R) Rotary Hammer - 18 V - 3/4"
Format 18V
Article #19836299
Model #GBH18V-20N
★★★★★ ★★★★★
5
(3)
BOSCH
Freak Impact Driver 2-in-1 - 1/4" and 1/2" - 18 V
Format 18V
Article #19836301
Model #GDX18V-1800CN
★★★★★ ★★★★★
5
(1)
MAKITA
Electric Rotary Hammer - 2'' - 15 A
Format 15.0AM
Article #11975422
Model #HR5212C
★★★★★ ★★★★★
0
(0)
BOSCH
120-V Demolition Hammer
Format 120V 10AM
Article #19835702
Model #DH507
★★★★★ ★★★★★
5
(1)
BOSCH
VSR Cordless Drill - Lithium-Ion Battery - 1/2" - 18 V
Format 1/2"x18V
Article #19836305
Model #GSR18V-755CB25
★★★★★ ★★★★★
0
(0)
BOSCH
"Brute Turbo" Jackhammer
Format 1 1/8" 120V
Article #19835700
Model #BH2770VCD
★★★★★ ★★★★★
5
(1)
BOSCH
Bosch Rotary Hammer - Bulldog SDS+ - Lithium-Ion 18 V
Format 18V
Article #19836340
Model #GBH18V-26DK15
★★★★★ ★★★★★
4.1
(7)
MAKITA
Cordless Rotary Hammer - 1-9/16'' - Lithium Ion 36 V
Format 36V 1 9/16"
Article #11975420
Model #DHR400PT2
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Max Angle Drill Kit - 12V - 3/8"
Article #330609728
Model #PS11-102
★★★★★ ★★★★★
4.5
(2)
BOSCH
Bosch SDS-max® Rotary Hammer - 1 3/4"
Article #330609801
Model #RH745
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Compact Tough™ Hammer Drill/Driver - 18 V - 1/2"
Article #330609710
Model #HDS181AB
★★★★★ ★★★★★
0
(0)

Can i use an SDS max bit with this?

Asked by: cocoabwoi
  • y_2020, m_8, d_3, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_CA, sid_1983278, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Variable Speed Hammer Drill - 7 A - 1/2'' is rated 2.5 out of 5 by 25.
Rated 4 out of 5 by from Good product for the $$$ I purchased this drill yesterday and also a couple Bosch hammer-drill bits. I needed four 5/8 holes in a patio slab that has been in place for 50+ years. I'd tried drilling it with a few days ago with a large 1/2 drill I had and was only able to drill an inch after a long time trying. This drill and a new bit (same as used with regular drill, just another one) did the trick in no time, the other three holes were drilled very quickly too. This is a light duty drill, no doubt, don't expect a contractor quality drill that can go all day. But then, you'll not have paid for that. Let it cool down and don't expect it to do things it wasn't meant to. You'll love it!
Date published: 2011-04-19
Rated 1 out of 5 by from Purchased Today, Going Back Tomorrow Very First use of Drill with a 1/2 inch Bit. Chuck Came loose after about 3 seconds of drilling. Occured in both drill and hammer mode. Tightening the chuck did absolutely no good. As tight a I could manage and still came loose after a few seconds. The teeth on the chuck also break easily as it is tightened. The slippage was so bad that I managed to turn my 1/2 inch shank bit into a 3/8 inch shank. The quality was surprisingly poor and the design of the front grip is also poor. The knob for tightening the front grip is very small and hard to tighten without a set of pliers. Front grip rotates easily during use. Don't think that I will ever purchase Bosch again!
Date published: 2011-06-25
Rated 3 out of 5 by from Depends on what you need it to do. This drill works fine for putting holes in cinderblock, brick, or "young", less dense concrete. My garage is typical cinderblock and this drill made hanging shelves go much quicker than a regular drill. I also hung a sign into exterior brick for a friend's business with no problem. This drill is useless (even dangerous) for tough jobs. I have 90 year old house and the foundation walls and basement floor are as tough as steel. I think the walls also have various stones as aggregate in the mix. They laugh at this drill and I snapped and wore down half a dozen bits before I went out and rented a tool up for the task.
Date published: 2011-07-27
Rated 1 out of 5 by from Quit working with few hours This drill was good value at $89 and drilled well. But it just quit working with very little use on the drill. I pulled the case apart and I have 120v coming out of the trigger but no current thru the windings. I called Bosch and they will charge $68 to fix it. I bought it 4 years ago but again very little use. I can buy a Porter Cable for $70 so that's what I will do. I have high dollar large hammer drills but I need a small one for many jobs. I thought Bosch was a good brand...not this drill. That will be my last Bosch tool.
Date published: 2013-12-13
Rated 4 out of 5 by from Good for light and medium duty jobs. Works excellent for drilling masonry; things such as tapcons. I wouldn't expect this drill to deal with really heavy, tough materials. In that case, don't buy a hammer drill - buy a rotary hammer instead (they are different). Pros: - decent price - works great, fast hammering action and reasonably powerful motor - hammer and plain rotary switch, multiple speeds Cons: - cheap plastic depth gauge and T-handle are weakest points - plastic around the switch area scrapes the skin if you aren't using gloves
Date published: 2011-08-15
Rated 1 out of 5 by from Not capable Having Bosch table and miter saws I purchased this drill on the company name. WRONG!!! My son burned up the first drill on two holes with a 1/2 inch bit. After holding my tongue about how to use a drill I proceeded to show him how to let the drill do the work. Needless to say, I burned up the second drill on the first hole. l had a Black and Decker 1/2 inch hammer drill for 20 years with no problem until the cord got cut. We expected more out of Bosch. The Bosch chuck key didn't fit properly. The chuck actually started wobbling in the bearing. I just couldn't believe how incapable this drill is. Lowe's, on the other hand, always stands behind products they sell which is the main reason I shop at Lowe's at least once a day. Thank you Lowe's.
Date published: 2012-04-02
Rated 5 out of 5 by from First use....I am impressed! I went to Lowes looking for the Hitachi 5/8 that was on sale and ended up taking this home because this is all they had in stock. I needed the drill today and thought I can return it if needed. Got home, drilled about a dozen Tapcon holes with a Tapcon Drill bit in 40 year old concrete and was thoroughly impressed with the hammer action and the speed. I agree with others that the depth gauge is a little cheap plastic, but its a nice feature. The attachment handle felt great and the tool was easy to control. I'm probably going to keep the tool for the occasional concrete drilling that I probably shouldn't be doing, but do anyways...You know what I mean.
Date published: 2013-06-09
Rated 1 out of 5 by from Disappointed with Bosch I bought this drill because of the reviews, I do wall concrete installations with many projects, drilling holes 1" to 1 1/2" deep with 3/16 tapcon bit, I managed to drill 9 holes and I saw sparks and it stop working, I couldn't finish my job, I had 20 holes left to drill. I was very disappointed and so was my customer as he had expected the job to be completed that day, I returned it and went to Home Depot and bought me the Milwaukee 5/8 in.SDS Rotery hammer drill model#5263-21 it worked like a champ
Date published: 2014-03-29
  • y_2020, m_8, d_3, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_en_CA, sid_1983278, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store