Brass Straight Anti-Freeze Valve

Article#0173103 Model#1390-100 Format1/2x1/2x10"
Brass Straight Anti-Freeze Valve
 

Description

Brass non-freeze wall hydrant, 1/2 in. male threaded x 1/2 in. soldered, natched flange for stable installation, built in.lockshield, 3/4 in. hose thread outlet, CSA certified.

Technical specifications

You may also like

AQUA-DYNAMIC
Brass Straight Anti Freeze Valve Hydrant
Format 1/2x1/2x14"
Article #0173368
Model #1390-140
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Brass Straight Anti-Freeze hydrant
Format 1/2x1/2x12"
Article #0173173
Model #1392-120
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Antifreeze valve
Format 12x1/2"
Article #01735288
Model #1393-120
★★★★★ ★★★★★
0
(0)
JOHN SCHULTZ
Antifreeze valve
Article #5690011
Model #888-183P
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Brass Straight Anti-Freeze Valve
Format 1/2x1/2x12"
Article #0173104
Model #1390-120
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Antifreeze valve kit
Format 12x1/2"
Article #01735289
Model #1104-719
★★★★★ ★★★★★
1
(5)
AQUA-DYNAMIC
Antifreeze valve
Format 1/2x1/2x12"
Article #0173460
Model #1104-559
★★★★★ ★★★★★
1
(8)
AQUA-DYNAMIC
Brass Straight Anti-Freeze hydrant - 1/2"x1/2"x10"
Format 1/2x1/2x10"
Article #0173172
Model #1392-100
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Antifreeze valve - Brass - 1/2"x1/2"x10"
Format 1/2x1/2x10"
Article #0173459
Model #1104-557
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Brass Straight Anti-Freeze Valve is rated 2.3 out of 5 by 3.
Rated 3 out of 5 by from Anti siphon valve stem insert One of the seal rings in the valve anti- siphon valve stem insert failed and Rona does not stock service kits so if you have a problem you will be obliged to purchase a new valve to obtain repair parts or to change out the valve entirely.
Date published: 2020-05-31
Rated 3 out of 5 by from Intermediate quality The key did not last more than 2 years in use. Probably a manufacturing defect, the exterior finish was not uniform throughout. The pipe cracked
Date published: 2020-06-18
Rated 1 out of 5 by from very bad desind la tige est vide et l'eau s'accumule a l'intérieur.l'eau entre par les 2 bout et l'eau sort par la vis qui tien la poigné ca veut dire qu'avant l'hivert il faut enlever la vis et sifoner avec un vaccum.mon ancienne valfe avait un tige plaine.j'ai appliqué du silicone au 2 bout qui est juste pressé et non coule.soudé et en plus c'est lousse.l'eau s'accumule quand la hausse a jardin est connecté et que la valfe est ouverte.meme avec la vis qui tien la poigné the rod is empty and the water accumulates inside. the water enters by the 2 ends and the water leaves by the screw which holds the handle it means that before the winter it is necessary to remove the screw and suck it with a vaccum. my old valve had a plain shank..but this one I applied silicone to the 2 end which is just squeezed and no sinks.welded and in addition it is loose.water accumulates when the increase to the garden is connected and the valve is open.even with the screw that holds the handle the water still flows
Date published: 2020-09-13
  • y_2020, m_10, d_27, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_CA, sid_0173103, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store