Circular Saw - 7 1/4" Blade with 18 Teeth - 15 A - Black/Red
Article#00276554
Model
#CMES510
Format
7 1/4"
Article#00276554
Model
#CMES510
Format
7 1/4"
Circular Saw - 7 1/4" Blade with 18 Teeth - 15 A - Black/Red
Article#00276554
Model
#CMES510
Format
7 1/4"
Description
This Craftsman(R) circular saw will allow you to accomplish all your renovation projetcs. Designed for a blade measuring 7 1/4" in diameter and delivering a cutting capacity of 2 1/8", it offers a consistent power of 15 A and will never lose velocity due to a discharged battery. Equipped with a high performance motor of 5500 RPM, this saw is perfect for fast, aggressive cuts in rough material, such as framing. Its lightweight, bevelling shoe made of magnesium allows for angled cuts of up to 55 degrees, with detents at 22.5 and 45 degrees for ease of use. The ideal tool for cross-cutting and ripping through soft and hardwood, this circular saw is sold with a 7 1/4" carbide tipped blade of 18 teeth and one hexagonal wrench. This product is backed by a 1-year limited warranty against any defects in material or workmanship.
Technical specifications
Power Source :Electric
Packaging :Each
Warranty :1-year limited warranty against any defects in material or workmanship
Included :1 carbide tipped blade of 18 teeth, 1 hex wrench
Blade Size :Diameter of 7 1/4" (18.4 cm)
Handle :Overmolded for more comfort
Cutting Capacity :Thickness of up to 2 1/8" (5.4 cm)
Revolutions per Minute :5500 RPM
Amperage :15 A
Type :Circular saw
Style :Corded
Color :Red and black
Utilization :Cross-cutting and ripping
Cutting Angle :Up to 55 degrees, with detents at 22.5 and 45 degrees
Circular Saw - 7 1/4" Blade with 18 Teeth - 15 A - Black/Red is rated
4.9 out of
5 by
21.
Rated 5 out of
5
by
CraftsmanLoyal from
Smooth and Powerful
Used a 90 tooth fine cut blade to rip down some solid pine 1-3/4” thick doors and it did so effortlessly. Not too heavy. [This review was collected as part of a promotion.]
Date published: 2018-10-13
Rated 5 out of
5
by
Smitty from
Great saw
First impression out of the box was it had a good weight to it and felt like a solid tool. The saw has plenty of power for whatever task I needed it for. I also noticed the saw had a nice comfortable grip and felt really good in your hands. It was really easy to get straight and clean cuts with this circular saw. I would highly recommend this circular saw to anyone in the market for one. Just an fyi if you buy this circular saw the wrench for the blade nut is on the end of the cord near the tool, I looked for a few minutes inside box for it before noticing it has a place to store it. [This review was collected as part of a promotion.]
Date published: 2018-12-27
Rated 5 out of
5
by
mjaworley from
Absolutely the best grip on circular saw ever!
This saw is awesome! It ripped right through 3/4 MDF like a hot knife through butter. The comfortable ergonomic grip is the best I've ever had in my hand for a circular saw. I'm what you might call a jack-of-all-trades sometimes finding myself cutting left handed hanging from a rafter or stuck in a tight corner. Being primarily right-handed, a good sturdy side normally feels awkward in the left hand. Not this thing! Felt right at home in my left hand ripped right through anything that I threw at it. The powerful 15 amp motor is barely felt through it's smooth operation and ergonomic cushion rubber grip. [This review was collected as part of a promotion.]
Date published: 2019-01-18
Rated 5 out of
5
by
Dell from
Craftsman circular saw
Had a Craftsman saw in the past and was really pleased with it. This one should be the same. [This review was collected as part of a promotion.]
Date published: 2018-11-26
Rated 5 out of
5
by
Strick from
Circular Saw
My husband is using this in updating our bathroom and he said he liked it as well as his buddy. They said it handled really well. [This review was collected as part of a promotion.]
Date published: 2019-01-06
Rated 5 out of
5
by
Grauch from
Great Saw For the $$$
Great basic saw for the money. I used this saw to cut ¾ inch plywood sheathing and finished birch sheathing in my new workshop. I had invested in a table saw, but found that working with 4x8 sheets was too difficult. I wound up getting a better result with this solid basic circular saw.
If you are looking for lasers and and fancy gizmo’s, this is not the saw for you. If you want a solid basic circular saw that gets the job done at a great price-point coupled with a great warranty, then this saw is for you. The saw is solid and a little on the heavy side, but has plenty of power for ripping quick 8 foot cuts through ¾ inch plywood and for cutting 2x4’s. I used this saw to trim 48 inch wide sheets down to 45 inches to match the spacing of metal beams in my barn. I also ripped 5 inch wide strips that I cut into French cleats to create a system for organizing tools on my wall. The saw never strained and allowed me to rip 8 foot strips as quickly as I could push it.
Saw adjustments are easy to see, even for my old eyes. Handles are beefy and easy to grip allowing you to lock the saw in to your adjustment solidly.
Creating the 45 degree angle cuts was no problem. Saw can actually go beyond 50 degrees. [This review was collected as part of a promotion.]
Date published: 2019-01-08
Rated 5 out of
5
by
BiancaCW from
Love this easy to use circular saw
This is my first circular saw so I can’t compare to anything else, but for that same reason I find it very easy to use and it gives me great result on my home projects. [This review was collected as part of a promotion.]
Date published: 2019-02-17
Rated 5 out of
5
by
dphillips82 from
Perfect addition to my toolchest
My husband and I have been growing our tool collection over the course of 11 years and, while we already had a circular saw, it was a battery operated one, and the battery would die relatively quickly. There just was not enough amps to get it through thicker wood, and we were looking for a better saw. This Craftsman circular saw is perfect. It got 15 amps and really rips right through any project we use it for! We just had to cut 1" thick plywood to put underneath my 40 gallon breeder fish tank, and it took less than a minute. The old saw would have ripped half the board, then we would have had to charge the battery for the rest. Needless to say, husband is happy, and we have a reliable saw! [This review was collected as part of a promotion.]
Date published: 2019-01-04
[RenoProductBottomBanner]
>
Tools
>
Portable Tools
>
Circular Saws
