Compression Nut with Insert - Brass - 1/4"

Article#0679107 Model#909-070201 Format1/4"
Compression Nut with Insert - Brass - 1/4"
 

Description

Made of brass, this Sioux compression nut is designed for strength, durability and rust resistance. The nut has an outside diameter of 1/4" and is great for use with copper, brass, aluminum or plastic tubing. It is typically used on gasoline, grease, oil, water, vacuum and air lines. This compression nut is not recommended for use with steel tube. It includes a brass insert.

You may also like

AQUA-DYNAMIC
Lead Free PEX 90° Elbow - 1/2"
Format 1/2" 90DG
Article #01735530
Model #9777-033
★★★★★ ★★★★★
0
(0)
Low Price
AQUA-DYNAMIC
Lead Free PEX Tee Coupling - 1/2"
Format 1/2"
Article #01735537
Model #9778-333
★★★★★ ★★★★★
0
(0)
Low Price
AQUA-DYNAMIC
PEX Female Adapter with Copper - 1/2"
Format 1/2"
Article #01735566
Model #9783-903
★★★★★ ★★★★★
0
(0)
Low Price
AQUA-DYNAMIC
Lead Free PEX Female Adapter - 1/2"
Format 1/2"
Article #01735556
Model #9783-033
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Lead Free PEX Female Drop Elbow - 1/2" x 1/2"
Format 1/2"x1/2"
Article #01735536
Model #9777-933
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Lead Free PEX Plug - 1/2"
Format 1/2"
Article #01735545
Model #9779-003
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Angle Stop Valve
Format 1/2PEXx3/8OD COMP
Article #01735377
Model #1990-602
★★★★★ ★★★★★
0
(0)
SIOUX CHIEF
Elbow - Dishwasher - 3/8" x 3/4" - Comp x Female Hose
Format 3/8x3/4"
Article #06795450
Model #637-B23HWP
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Lead Free PEX Insert Male Adapter - 1/2"
Format 1/2"
Article #01735548
Model #9781-033
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Lead Free PEX 90° Elbow - 1/2" - 25/Pack
Format 1/2" 90DG 25PK
Article #01735534
Model #9777-833
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Lead Free PEX Female Adapter - 1/2" x 3/4"
Format 1/2"x3/4"
Article #01735557
Model #9783-034
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Lead Free PEX 90° Elbow - 3/4"
Format 3/4" 90DG
Article #01735532
Model #9777-044
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Straight Stop Valve
Format 1/2PEXx3/8OD COMP
Article #01735378
Model #1991-602
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
PEX Male Adapter with Copper - 1/2"
Format 1/2"
Article #01735553
Model #9781-903
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Female Adapter - 1/2" x 3/4"
Format 1/2x3/4" F
Article #01735499
Model #9972-134
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Lead Free PEX Tee Coupling - 3/4" x 3/4" x 1/2"
Format 3/4x3/4x1/2"
Article #01735541
Model #9778-443
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Nipple - Brass - 1/2" x 2" - MIP x MIP
Format 1/2x2"
Article #0173315
Model #4463-020
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Lead Free PEX Tee Coupling - 3/4"
Format 3/4
Article #01735542
Model #9778-444
★★★★★ ★★★★★
0
(0)
PLUMBPAK
Sink Tailpiece - Brass - Flanged - 1 1/2" x 6"
Format 1 1/2x6"
Article #12365538
Model #BP36106
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Lead Free PEX Female Adapter - 3/4"
Format 3/4"
Article #01735559
Model #9783-044
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Nipple - Brass - 1/2" x 1 1/2" - MIP x MIP
Format 1/2x1 1/2"
Article #0173314
Model #4463-015
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Nipple - Brass - 1/2" - MIP x MIP
Format 1/2"
Article #0173313
Model #4463-001
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Lead Free PEX Plug - 1/2" - 25/Pack
Format 1/2" 25PK
Article #01735546
Model #9779-803
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Lead Free PEX Tee Coupling - 1/2" - 25/Pack
Format 1/2" 25PK
Article #01735544
Model #9778-833
★★★★★ ★★★★★
0
(0)
AQUA-DYNAMIC
Nipple - Brass - 1/2" x 2 1/2" - MIP x MIP
Format 1/2x2 1/2"
Article #0173316
Model #4463-025
★★★★★ ★★★★★
0
(0)

Technical specifications

Included :Nut, insert Type :Compression nut with insert Finish :Brass Packaging :Each Diameter :1/4" (6.35 mm) Component :Brass
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Compression Nut with Insert - Brass - 1/4" is rated 2.9 out of 5 by 12.
Rated 5 out of 5 by from this product designed to work on poly tubing only This brass nut works as designed on poly tubing only The insert keeps the poly tubing from crushing If you use on COPPER its more than likely going to LEAK !
Date published: 2011-08-07
Rated 5 out of 5 by from It works fine. It's for Poly tubing, and it fits fine on the water line on my fridge. Nice and snug, too. Too bad the competition didn't have a part that would work.
Date published: 2012-07-26
Rated 5 out of 5 by from ice maker connector This product worked just fine. I did have a little trouble, but after getting some advice everything went fine.
Date published: 2013-06-17
Rated 1 out of 5 by from Gone through 3 of these on copper tubing Gone through 3 of these on 1/4 o.d.copper ice maker tubing line. They leak through of inside of nut. I recommended of getting two pieces set (( compression nut and sleeve )) instead of built in like this one to use on copper tubing.
Date published: 2011-01-05
Rated 1 out of 5 by from Worthless and frustrating I couldn't get the compression ring and nut to fully go on the 1/4" copper line. It wouldn't seat any further down than flush with the end of the copper line and I put a ton of pressure trying to get it to go on further. Of course, as you would expect with the thing not going on properly, it leaked and the ring/nut kept sliding off the end of the copper line after tightening. Tried a 2nd one, same thing (FYI, I kept cutting off bits of the copper line before each attempt to ensure that the line hadn't been compressed which might cause leaking). Finally on the 3rd one, I was able to get the ring/nut to slide down the copper line further. Guess what? Still leaked!!!! Why do I keep paying for this junk? Read another review that said to get the compression ring and compression nut separate as they are a different style, guess I'll try that. Here's to hoping I can get water and ice from my fridge soon!
Date published: 2014-05-31
Rated 4 out of 5 by from Don't make'm like they used to. Needed this part, no other option available except to use the threaded nut with the molded compression point. In the past there was a serviceable plastic washer/seal which you could replace if needed. Now this one-piece is a single use design, if you need to cut your line then this will be impossible to take off without damaging the seal. (they cost $1.25) so buy at least two.
Date published: 2013-11-12
Rated 5 out of 5 by from It works for my refrigerator! This is just a fitting for my fridge's icemaker. It seems to work pretty good and I have no complaints. I am not sure if this is the top model or not. I didn't buy it in the store, we had to buy it by phone because we didn't have it with us when the fridge was delivered.
Date published: 2013-12-01
Rated 1 out of 5 by from Leaks Used on 1/4 poly tubing, with the stiffener/insert... No matter how tight or loose it is tightened onto the poly, it slow leaks. Replaced with a brasscraft version (which many Lowe`s also carry) and did not have a problem.
Date published: 2015-12-29
  • y_2020, m_3, d_31, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_CA, sid_0679107, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store