Corded Oscillating Tool - 3 A - 22,000 OPM - 11 Accessories

Article#00276900 Model#CMEW400
Corded Oscillating Tool - 3 A - 22,000 OPM - 11 Accessories
 

Description

This corded Craftsman® oscillating tool will allow you to tackle many jobs with a single tool. Equipped with a wood blade, a bi-metal blade, a scraper, and a sanding pad, this versatile tool will follow you in any renovation job you engage in. The tool-free accessory replacement system will give you a quick and easy transition and will allow you to go back to the job site as soon as possible. The oscillating tool is sold with its storage bag and is backed by a 3-year limited warranty.

You may also like

DREMEL
Rotary Tool Kit - 120 V - 25-Piece
Format 25PC
Article #19836184
Model #3000-1/25
★★★★★ ★★★★★
4.2
(95)
DREMEL
Rotary Tool with accessories
Format 1.2AMx24PC
Article #19165106
Model #3000-1/24
★★★★★ ★★★★★
4.2
(95)
DREMEL
Electric 4000 Rotary Tool Kit - 1.6A - 41 Pieces
Format 34PC
Article #19836185
Model #4000-4/34
★★★★★ ★★★★★
0
(0)
MAKITA
Electric Oscillating Multi-Tool Kit - 3A - 13 Pieces
Format 320W
Article #11975390
Model #TM3010CX3
★★★★★ ★★★★★
0
(0)
DREMEL MULTI-MAX
Multi-Max(TM) Oscillating Tool Kit - 3.3 A
Format 3.3AM
Article #19165124
Model #MM30-04
★★★★★ ★★★★★
4
(1)
DREMEL
Rotary Tool Kit - Variable Speed - 41-Piece
Format 41PC
Article #19835978
Model #4300-5/40
★★★★★ ★★★★★
4.8
(58)
DREMEL
Dremel Multi-Max MM50 Oscillating Tool - 5 A
Format 5.0AM
Article #19836329
Model #MM50-01
★★★★★ ★★★★★
0
(0)
DEWALT
Cut-Out Tool - Cordless - Lithium Ion 20 V
Format 20Vx2AM
Article #00275879
Model #DCS551D2
★★★★★ ★★★★★
2
(1)
DREMEL
Rotary Tool - 18 Pieces and 160 Pieces Accessory Set
Format 18PC-160PC
Article #19836229
Model #3000-N/18+715-01
★★★★★ ★★★★★
0
(0)
DEWALT
Cut-Out Tool - 5 A
Format 5A
Article #0834229
Model #DW660
★★★★★ ★★★★★
4.8
(12)
DEWALT
Oscillating Multi-Tool - 20V XR - Yellow/Black
Format 20V
Article #00276148
Model #DCS355D1
★★★★★ ★★★★★
4.8
(144)
DREMEL
Saw Max(TM) Tool Kit
Format 6AM
Article #19165123
Model #SM20-03
★★★★★ ★★★★★
4.2
(84)
MAKITA
Cordless Multi-Tool - 18 V
Format 18V
Article #11975339
Model #DTM50ZKX1
★★★★★ ★★★★★
0
(0)
BOSCH
StarlockPlus(R) Oscillating Multi-Tool Kit - 32 pc
Article #330658628
Model #GOP40-30C
★★★★★ ★★★★★
5
(1)
DREMEL
''100 Series'' Rotary Tool Kit - 120 V
Format 1.15AM
Article #19165087
Model #100-N/7
★★★★★ ★★★★★
0
(0)
DEWALT
Oscillating Multi-Tool with Accessories - 3.0 A
Format 3AM
Article #00276135
Model #DWE315K
★★★★★ ★★★★★
4.7
(110)

Technical specifications

Type :Oscillating tool Power Source :Electric Other :Compatible with the Versatrack™ system Packaging :Each Warranty :3-year limited warranty Style :Corded Color :Red and black Amperage :3 A Orbits per Minute :10,000 to 22,000 OPM Included :Wood blade, bi-metal blade, scraper, sanding pad, two 240 grit sandpaper, three 100 grit sandpaper, two 80 grit sandpaper, storage bag
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Corded Oscillating Tool - 3 A - 22,000 OPM - 11 Accessories is rated 4.5 out of 5 by 29.
Rated 5 out of 5 by from Must have tool I've always wanted one and pulled the trigger. This tool is fantastic and has more power that I thought. I bought it to sand the corners of my wood floors and this dis the job. It came with 89,100, 240 grit paper. The 80 grit made the job much faster. I would buy this tool again as a gift for someone. [This review was collected as part of a promotion.]
Date published: 2018-10-26
Rated 2 out of 5 by from compatible with Versatrack? not so much!! The box and online specs state that this and many of the other V20 cordless tools are compatible with the Versatrack system. Then the fine print says the clips are sold seperately. I was able to research an discover the needed clips are part number CMSTC4VT, but Guess what? The clips cannot be found anywhere. I even spent 42 minutes on the phone with Craftsman customer care and parts department. They said they don't have any information on when they will be available. This is not Craftsman like. I am not sure what is up but I am very disappointed that I cannot get them to work with the Versatrack system.
Date published: 2019-04-30
Rated 3 out of 5 by from Decent tool and a reasonable price. This is an adequate tool for the weekend DIY warrior. It fits all the universal blades and has really no trouble running any of them. I got the tool on sale so the price point was the deal breaker for me. Most likely would’ve gone with a Dewalt or Ryobi if this one had not been substantially cheaper. The only real negative I have is that the motor gets very hot after a few minutes of use and I’m not sure of the longevity of the electric motor because of it. I just have never had this issue with a little higher grade power tool. [This review was collected as part of a promotion.]
Date published: 2019-03-31
Rated 5 out of 5 by from Great tool for the money Great tool so far. A little skimpy on attachments but for 80$ you can't go wrong. Not too whiney (compared to others I've used). Changing blade/angle is easy and quick. Size is right, with a sturdy build and high to low power. Very happy with a week of heavy use on site.
Date published: 2019-01-04
Rated 4 out of 5 by from Good power, ergonomics, and utility I got this tool today. I chose corded, since wired models generally have better overall performance regardless of brand. Using the tool for grout removal was a synch. It sawed out grouting quick and easy. The only downsides were: vibration, heat, and noise. Tingling from vibration did not effect precision, nor was it ‘uncomfortable’ at all settings; however, the sensation was noticeable after use it for a while. Heat buildup, as stated in the tool manual, is worse at lower OPS settings on the speed dial. However, quickly removing the head, and running the multi unloaded at the highest setting for roughly 1 minute (as instructed) cools the tool enough for continued use. Lastly, sound from idling was significant enough to warrant wearing earplugs.
Date published: 2019-04-07
Rated 4 out of 5 by from New to me The Craftsman Oscillating Multi-tool is a new type of power tool for me. I purchased it for a specific project and have not had time to fully use it for that task or the muttude of other tasks it's supposed to be well suited for. I did quite an extensive search for the best value brand wise and the B$D came out on top I look forward to to further use. [This review was collected as part of a promotion.]
Date published: 2019-04-13
Rated 5 out of 5 by from Plunge cut in tight quarters. I hadn't used an oscillating cutter before but it looked right for plunge cutting a vent hole in 2x6 stock mounted in tight quarters. At first, I wondered if I had made a mistake. Turns out too little pressure doesn't cut and too much pressure stalls the oscillation and also doesn't cut. Making no progress I couldn't figure out what was wrong. Fortunately it was getting dark and by headlamp I observed this oddity in the sweep of the blade and could then make adjustments in pressure to ensure continued progress. I was pleased with the result. The tool is definitely suited to plunge cutting in tight quarters, much less concerning than a reciprocal cutter when you have no idea what is behind the stock you are intending to cut. I haven't had a chance to try the other applications of this multi-tool but look forward to discovering them.
Date published: 2019-03-08
Rated 5 out of 5 by from Craftsman multi tool Craftsman to me is the best. Growing up in the 70s my Daddy bought olny Craftsmen tools. We were remodeling our living room and it really came in handy and did an excellent job. [This review was collected as part of a promotion.]
Date published: 2019-01-01
  • y_2019, m_6, d_16, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_29
  • loc_en_CA, sid_00276900, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 3ms
  • REVIEWS, PRODUCT

Frequently bought together

DEGIL SAFETY
Safety Flex Goggle
Article #8657090
Model #7052000
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Multi-Tool Blade Starter Set - 4 Blades
Format 1 1/4"x2 3/4"xPK4
Article #09065021
Model #1070212
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Multi-Tool Grout Removal Segmented Blade - 3"
Format 3x3.5"
Article #34595729
Model #1070102
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Wood/Metal Flush Cut Blade - 1 1/4" - 5-Pack
Format 1 1/4"xPK5
Article #34595736
Model #1070232
★★★★★ ★★★★★
0
(0)
DEGIL SAFETY
Ultra-Lightweight Protective Glasses - Clear - Pack of 12
Format PK12
Article #86575178
Model #7056000-12
★★★★★ ★★★★★
0
(0)

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store