Our stores will remain open for your essential needs. See COVID Restrictions. Details

L'article sera livré en bordure de trottoir en raison des restrictions de poids

Item will be delivered curbside due to weight restrictions

CRAFTSMAN 10-in Carbide-Tipped Blade Table Saw

CRAFTSMAN

CRAFTSMAN 10-in Carbide-Tipped Blade Table Saw

Article #97925013 Model #CMXETAX69434502 Format10"x15AM

Our stores will remain open for your essential needs. See COVID Restrictions. Details

L'article sera livré en bordure de trottoir en raison des restrictions de poids

Item will be delivered curbside due to weight restrictions

Description

This CRAFTSMAN 10-in table saw has a powerful 15 A motor that generates 5000 RPM and is designed for cutting various wood-based materials with a high level of precision. The steel roll cage design makes this tool particularly strong and durable. The detachable folding stand makes it extremely easy to use and store. The cast aluminum table provides 12 inches of right and 10 inches of left rip capacity. A great choice for any jobsite or workshop!

Powerful 15-amp motor generates 5,000-RPM for precise cuts of jobsite and workshop task
The 27 - 3/8 in. x 21 - 7/8 in. cast aluminum table provides 12 in. right and 10 in. left rip capacity
Steel roll cage design for added durability and strength
Quick release locking rip fence allows clean and accurate cuts
Detachable folding stand for ease of use and storage
3-1/8 in. 90 degree max cutting depth and 2-1/4 in. 45 degree max cutting depth
Includes: portable stand, rip fence, sub rip fence, blade guard, anti-kickback pawls, miter gauge, blade wrenches, push stick and 10 in. 24T carbide tipped blade

Technical specifications

Amps :15 Arbor Diameter :5/8-in Auxiliary Handle :No Base Warranty Labor(Months) :1 Base Warranty Parts(Months) :1 Battery Warranty Labor(Months) :1 Battery Warranty Parts(Months) :0 Bevel Capacity(deg) :45 Blade Included :Yes Blade Material :Carbide-tipped Blade Size(cm) :25.4 Blade Size(in) :10 Blade Size(mm) :254.0 Caster Platform Included :No Cutting Depth(cm) :7.9375 Cutting Depth(in) :3.125 Cutting Depth(mm) :79.375 Depth Control :No Dust Handling :Port File/Certification Number :184892 Left Rip Capacity(cm) :25.4 Left Rip Capacity(in) :10 Left Rip Capacity(mm) :254.0 Maximum Blade Speed(RPM) :5000 Maximum Depth at 45 Degrees(cm) :5.715 Maximum Depth at 45 Degrees(in) :2.25 Maximum Depth at 45 Degrees(mm) :57.15 Maximum Depth at 90 Degrees(cm) :7.9375 Maximum Depth at 90 Degrees(in) :3.125 Maximum Depth at 90 Degrees(mm) :79.375 Micro Adjust Rip Fence :No Motor Warranty Labor(Months) :1 Motor Warranty Parts(Months) :1 Portable :No Repetitive Cut Marking System :No Right Rip Capacity(cm) :30.48 Right Rip Capacity(in) :12 Right Rip Capacity(mm) :304.8 Safety Listing :CSA safety listing Saw Blade Diameter :10-in Series Name :N/A Special Warranty Labor(Months) :0 Special Warranty Parts(Months) :0 Spindle Lock :No Stand Type :Fixed Table Height(cm) :87.63 Table Height(in) :34.5 Table Height(mm) :876.3 Table Length(cm) :68.58 Table Length(in) :27 Table Length(mm) :685.8 Table Width(cm) :55.372 Table Width(in) :21.8 Table Width(mm) :553.72 Type :Benchtop Voltage :120 Warranty :3-year limited Weight(kg) :26.3088 Weight(lbs.) :58 Worm Drive :No

Frequently bought together

CRAFTSMAN

CRAFTSMAN Plywood Circular Saw Blade - 7 1/4-in dia - 140T - High Speed Steel

CRAFTSMAN General Purpose Circular Saw Blade - 10-in dia - 40T - ATB Grind Geometry - Carbide Teeth

CRAFTSMAN Circular Saw Blade - Carbide - Fine Finish - 60 Teeth - 10-in dia

CRAFTSMAN 10-in Single Bevel Sliding Mitre Saw

Format 10"x15AM

Article #97925012

Model #CMXEMAX69434501

CRAFTSMAN 120 V 8-Gal. 3.5 HP Corded Portable Wet and Dry Shop Vacuum

Stirling Trailers Galvanized Steel Expandable Trailer - 5-ft x 10-ft

Stirling Trailers Galvanized Steel Expandable Trailer - 4-ft x 8-ft

Galvanized Steel Expandable Trailer - 5' x 8'

Stirling Trailers Galvalume Steel Utility Trailer 4-ft x 6-ft with Ramp Gate

Trailer with Removable Rear Panel - 3 1/2-ft x 5-ft - Black

Carry-On Trailer Next Gen 5-ft x 8-ft Wire Mesh Utility Trailer with Ramp Gate

Is this compatible with a dado stack?

Asked by: Eugene W

Yes. The dado table insert is sold separately. You need an 8” stack dado with a ½” max width.

Answered by: Craftsman

Date published: 2023-09-05

CRAFTSMAN 10-in Carbide-Tipped Blade Table Saw is rated 3.9 out of 5 by 356.

Rated 5 out of 5 by RThacher from Fantastic product for the price I have now owned/used this table saw for 6 months and it has been perfect. I've even used this saw to cut custom chocks for aircraft using composite 2x4s and it cut perfectly. While the table size and features are lacking compared to more expensive table saws, this is perfect for me with my smaller shop and my beginner DIY skill level. I am able to accomplish everything I have wanted to thus far with ease. The one drawback is the OEM miter slot tabs that make purchasing or creating a nice table saw sled difficult. I really wish that this saw did have the standard miter track slots which would expand the ease of making new jigs/sleds.

Date published: 2021-11-15

Rated 5 out of 5 by WillG from Great table saw at a reasonable price [This review was collected as part of a promotion.] I needed a table saw to make rip cuts for a hardwood flooring installation. I've been trying it by hand for a while but it's a lot of work and the cuts are less than perfect. This table saw is the perfect answer for light to medium duty projects. I now have to cut oak stair treads and the test cuts so far have been like a hot knife through butter. Sturdy table and stand. Great blade and quiet powerful motor. Comes mostly assembled except for the legs. I attached my shop vacuum to the exhaust on the back of the table and it's almost dust-free. All components are quality and for the price, this is a really good buy.

Date published: 2019-09-23

Rated 4 out of 5 by max from Great saw bad instructions I’ve seen the saw before but now could not pass up the price. A past review posted that the instructions were bad. YES VERY BAD. My advise is give yourself time and be patient. The worst part is the assembly of the legs. The rest is fine. The saw is perfect for small projects. It takes up very little space. Portable? Yes. Light weight? Yes. Folds up quick? No. I plan to upgrade the stand to one with wheels. Accessories: Through away the miter jig. The safety stuff is fine. The fence actually works better then I expected. All in all a great saw for small projects.

Date published: 2020-05-18

Rated 2 out of 5 by Zac from Craftsman poor workmanship Out of the box the riving knife is bent. Which catches the wood as you push through and is very dangerous. I contacted Craftsman cutomer service and they forward me to some 3rd party company and said they cant do anything and to return it to the store. so i return it and get another one. Out of the box, the angle lock lever is rigged incorrectly so when I lock the angle, the blade raising handle hits the lock and cant be raised. I also just bought a Craftsman 20" chainsaw and out of the box, the chain was installed backwards. Very upset with Craftsman's delivery of quality in there products. No more Craftsman products for me.

Date published: 2020-11-20

Rated 1 out of 5 by gpd387 from This is not a safe saw First things first, I know this is an entry level saw so I am not comparing it to a professional grade table saw. However, I purchased this saw as I am waiting on my new table saw to arrive and I used it for the first time today (11/7/20). I make pen blanks and sell them via the internet and I use a table saw a lot to cut acrylic pen blanks. I cut them to 7/8" square and as I was attempting to cut the blanks I realized the insert was flexing and the blank was getting wedged against the blade, very dangerous for kick back. Because of the insert flexing I found it difficult to get square cuts. Very disappointed in Craftsman's lack of quality on this saw.Er

Date published: 2020-11-08

Rated 1 out of 5 by ANTIVNTIANTI from The Throat Plate is(abhorrently) dangerous/flexes First one I had to bring in and exchange within three days. The throat plate is so unbelievably flexible it feels more akin to a hard rubber than any plastic Ive ever known, its not stiff. The second one, same Plate so, before I allowed it to damage my fence or break more fingers, made my own out of oak ASAP. HOW IS THIS THING SOLD WITH AN “RUBBER” throat plate?! Otherwise thing is quite awesome for the price! But wouldn’t ever ever reccomend it, theres a green/yellow guy at another BB colored orange that is or was(the new model kinda sucks) that was my first table saw and that had a real throat plate not an accident waiting to happen

Date published: 2020-12-25

Rated 1 out of 5 by MrHal from Table saw is not good. Junk ! I bought this last week, setup was easy. BUT this is really a cheap saw. 1. The miter gauge is sloppy and the track will not accept my old craftsman miter tool. Plus it is not a standard slot. No use trying to make anything to use in this slot. 2. The nut that secured the blade on was so tight that I had to use a pipe over a wrench to get it loose to replace the 24 tooth blade with an 80 for finer cuts. 3. The power switch or start switch does not work right. Push the switch to start and nothing, push again and it might start. Pushed a 3rd time to get it to run. Switch is engaged but not running. After all of this, I boxed it back up and will return it tomorrow. Will spend the money for a better saw. H.W.S

Date published: 2021-12-13

Rated 5 out of 5 by Robamus from Nice Saw - Heres how to Collect the Dust I collect Craftsman like a kid does Pokemon. But my OCD set me on a mission to get this dust collection mystery solved. Moistly old guys complaining online about cutting and modifying stuff. Heres how this works from my mission results; Buy the DeWalt DWV9000. Remove tip of small shop hose - the hard part you slip a crevice tool or brush onto. Mine yanked out or unscrewed (reverse thread) Reverse thread adaptor onto hose. Now it attaches to the DeWalt DWV9140, which you simply shove the large end into the saw. You're welcome.

Date published: 2020-05-30

CRAFTSMAN 10-in Carbide-Tipped Blade Table Saw Reviews - page 2

CRAFTSMAN 10-in Carbide-Tipped Blade Table Saw

Description

Technical specifications

Frequently bought together

You may also like

Is this compatible with a dado stack?

Changing store