Dewalt 8 1/4-in Compact Jobsite Table Saw

Article#00277225 Model#DWE7485 Format8 1/4"
Dewalt 8 1/4-in Compact Jobsite Table Saw
 

Description

This DWE7485 Dewalt® table saw is equipped with a 15-amp 5800 RPM motor which quickly rips through hardwoods with ease. Dual rack and pinion fence system procure a rapid adjustment and increased accuracy. The 2-position fence with a maximum 24.5-in rip capacity. The metal roll cage base offers greater durability than plastic bases. The table coating reduces friction for smoother cutting. Weighing only 46 lb, this table saw can easily be moved on and off the job. It is equipped with a dust port that allows for 2 1/2" vacuum hook up and minimizes clean-up time.

Technical specifications

Model :DWE7485 Feed :Corded Blade :8 1/4-in Rip Capacity :24.5-in Cutting Depth :2 9/16-in at 90° Component :Métal and composite Color :Yellow and black Blade Size :8 1/4-in Length :22.75-in Revolutions per Minute :5800 RPM Warranty :3-year warranty Weight :46 lb Voltage :No Volt release switch for added safety Height :13-in Arbor Size :5/8-in

Frequently bought together

YELLOW JACKET
6-Outlet Power Bar with Surge Protection - 6' - Yellow
Format 1.8M
Article #32045053
Model #5139NSP
★★★★★ ★★★★★
3
(2)
YELLOW JACKET
Single Outlet Portable GFCI Adapter - 1800 W - 15 A
Article #32045050
Model #14650013-6
★★★★★ ★★★★★
0
(0)
WOODS
12/3 Extension Cord - 25' - Red
Format 12/3 25'
Article #74045239
Model #1697SW0002
★★★★★ ★★★★★
0
(0)

You may also like

MAKITA
10-in Table Saw with Support
Format 10"x15AM
Article #11975246
Model #2705X1
★★★★★ ★★★★★
0
(0)
BOSCH
Portable Table Saw - 10" -15 A
Format 10"x15AM
Article #19835506
Model #GTS1031
★★★★★ ★★★★★
3.2
(13)
BOSCH
Worksite Table Saw with Wheeled Stand - 10"
Format 10"x15AM
Article #19836270
Model #4100-10
★★★★★ ★★★★★
4.8
(51)
BOSCH
Bosch Table Saw Zero Clearance or Dado Insert
Article #330009250
Model #TS1006
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Left Side Support for Table Saw
Article #330009253
Model #TS1008
★★★★★ ★★★★★
4.3
(3)
BOSCH
Bosch Dual-Activation Cartridge
Article #330009251
Model #TS1020
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Out Feed Support Assembly
Article #330009254
Model #TS1016
★★★★★ ★★★★★
4.7
(3)
BOSCH
Bosch Table Saw Stand
Article #330009252
Model #TS2100
★★★★★ ★★★★★
5
(1)
DEWALT
Dewalt Table Saw with Rolling Stand - 10" - 15 A
Format 10"x15A
Article #00275708
Model #DWE7491RS
★★★★★ ★★★★★
4.6
(508)
DEWALT
Tile Saw - 10" - 15 A
Format 10" 15AM
Article #00275767
Model #D24000S-A
★★★★★ ★★★★★
4.9
(24)
DEWALT
Compact Table Saw - 10" - 15 A
Format 10"x15A
Article #0027593
Model #DW745
★★★★★ ★★★★★
4.7
(123)
DEWALT
Dewalt Compact Table Saw - 10" - 15 A
Format 10"x15A
Article #00275707
Model #DWE7480
★★★★★ ★★★★★
4.7
(471)
TRITON TOOLS
Triton Tools Guide Rail for Triton TTS1400 Plunge Track Saw - 59-in
Article #330668655
Model #TTST1500
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools T-Square Guide - White
Article #330668649
Model #TTSTS
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Angle Guide - 55° - White
Article #330668656
Model #TTSAG
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Rugged Transit Kit
Article #330668634
Model #TWX7RTK
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Router Track Adaptor
Article #330668684
Model #TRTA001
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Multi-Stand - 31.5-in x 37-in - Orange
Article #330668645
Model #MSA200
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Table Saw Module - 26-in x 16.5-in - Orange/Black
Article #330668640
Model #TWX7CS001
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Canvas Bag for 1500 mm - 59-in - Black
Article #330668657
Model #TTSCB1500
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Saw Bag for TTS1400
Article #330668654
Model #TTSSB
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Tracks and Connectors Set - 27.5-in - 2 pcs
Article #330668648
Model #TTSTP
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Parallel Guide
Article #330668653
Model #TTSPG
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Dust Extraction System - 1000 ml
Article #330668652
Model #TTSDES
★★★★★ ★★★★★
0
(0)
TRITON TOOLS
Triton Tools Track Connectors - 2 pcs
Article #330668651
Model #TTSTC
★★★★★ ★★★★★
0
(0)

Is there a 12 month equal payment plan on all dewalt table saws. 

Asked by: PCPTR
  • y_2020, m_10, d_24, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_CA, sid_00277225, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Dewalt 8 1/4-in Compact Jobsite Table Saw is rated 4.8 out of 5 by 28.
Rated 5 out of 5 by from Excellent Little Compact Fireball! I have use it for a couple of days for a total of about 10 hours and I'm very impressed. I've moved from a Bosch 4100, which was giving me alignment issues which was causing major frustration. The wife on my back, so I decided to try a Dewalt. Couldn't find the 745 and decided on the DWE7485. Glad I did. I'm use to using a 10" blade but wasn't opposed to to a smaller. If your in the trade of construction and carpentry, I can understand it. I'm just into woodworking. I have a one car garage shop, so it fits very well. If your in the market you can't go wrong. There will always be haters and naysayers who just love to be negative. If it's not for you find another brand. This is my first Dewalt purchase though I have been using the product for over 15 years for work.
Date published: 2020-04-08
Rated 4 out of 5 by from Nearly very good So this is in general a well built and high quality product. But there are a few snags which need to be addressed The instructions are the pits. Badly written and confusing. OK in the end you sort it out, but why are the diagrams and part identifications on a different page requiring much page turning back to understand? The miter gauge is rubbish. Way too much slop on the fit, making repeatability an issue when used for making good quality items. Probably OK for a job site if you don't mind your house not to be upright! Shame because this could be a good saw for accurate carpentry. Well built in general, sturdy and durable.
Date published: 2020-05-20
Rated 5 out of 5 by from Love it!! I recently started looking for a table saw. I looked at several different saws, I needed one that was compact and somewhat portable. This is my first table saw and since purchasing it I LOVE IT!! It is quite portable and all of the accessories it comes with have a spot on the saw so you don't have to make multiple trips to get everything you need to use it!! It does use an odd size blade (8 1/4") but I have been able to find replacement blades for that saw.
Date published: 2020-07-06
Rated 5 out of 5 by from Great Saw Just got mine delivered a couple days ago. Bought the saw because I had to rip 12’ pieces of shiplap. Saw did awesome on these long cuts. Blade did nice clean cuts. The legs being outward and flat on top made it easy to clamp down (not sure it really needed to because it felt pretty sure footed already). Like that all the accessories have locations on the saw to be stored. like also that saw base and guard both have vacuum connections. Push stick was included. Other reviews of the previous model said the miter jig was loose and plastic. But this one is all aluminum/steel and had no slop-fit well. Only wish it could use a dado. Really think a great saw for the money. [This review was collected as part of a promotion.]
Date published: 2020-05-31
Rated 5 out of 5 by from Great little saw. Fantastic product. Does everything it's supposed to do and does it very well. Great rip capacity, and the fence adjustment is dead on accurate. I bought this to build our kitchen island, in conjunction with my chop saw. You can do almost everything with that combination, and a couple of foldable worktables. Watch out for price drops, which only last a couple days. Not sure what that's all about. Get a screenshot of it (I didn't ), and you should be alright.
Date published: 2020-08-23
Rated 5 out of 5 by from Versatile compact beast I’ve had for over a month and this saw is doing everything I need it to do and It’s doing it very well. My most recent cuts I’ve been making have been with a 1/4 inch Dado blade. The depth of my cuts have been 1/2 inch. The saw has need handling it very well. In regards to using a Dado blade; 1/4” is the widest cut you can make with this saw.
Date published: 2020-04-19
Rated 5 out of 5 by from Excellent Saw If youre concerned about the blade size not to fret. This machine is beautiful outta tye box. I aligned it with my digital angle gauge and it was on point. For the price....better than buying a used one!
Date published: 2020-05-20
Rated 5 out of 5 by from First Table saw Very sataisfied. If you're on the fence, do it now while they're on sale. I am so happy I pulled the trigger!!! Just wish I had the better stand.
Date published: 2020-05-24
  • y_2020, m_10, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_en_CA, sid_00277225, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store