DeWalt Carbide Circular Saw Blade - 60 TH - 7 1/4"

Article#00277171 Model#DWA171460B10 Format7 1/4"
DeWalt Carbide Circular Saw Blade - 60 TH - 7 1/4"
 

Description

These DeWalt 7 1/4" saw blades are designed for precise finishing jobs. The ToughTrack teeth design provides straight and precise cuts. Patented slots reduce vibration during uses, while high-density tungsten carbide teeth have superior durability. The reinforced shoulder provides great resistance to nail impacts, not to mention that blades are equipped with a ToughCoat non-stick coating, which greatly reduces friction and gumming. These blades can be used with any circular saw. Satisfaction guaranteed 30 days.

You may also like

eco
EXCHANGE-A-BLADE
4 1/2-in Diamond Saw Blade
Format 4 1/2"
Article #34595625
Model #03110122
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
7-in Diamond Saw Blade
Format 7"
Article #34595626
Model #03110132
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
"Contractor Series" Continuous Diamond Blade - 7"
Format 7"
Article #34595635
Model #03110232
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
"Contractor Series" Tuck Point Diamond Blade - 4"
Format 4"
Article #34595637
Model #03110252
★★★★★ ★★★★★
0
(0)
METABO HPT
Steel Circular Saw Blade - 7 1/4'' - 24 Teeth - 3/Pack
Format 7 1/4"x24THxPK3
Article #37815223
Model #115430M
★★★★★ ★★★★★
0
(0)
FREUD
Circular Saw Blade
Format 10"X40TH
Article #0696008
Model #TK306
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Bi-Directional Saw Blade - 7 1/4" - 24TH
Format 7.25"
Article #34595949
Model #1019692
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
"Ultra-Thin" Circular Saw Carbide Blade-6.5" -24TH
Format 6 1/2"x24TH
Article #3459003
Model #1016092
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Green Blade Finishing Circular Saw Blade - 24 TH - 8 1/4"
Format 8 1/4"x40TH
Article #34595836
Model #1110102
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
"Green" Carbide Blades - 6 1/2" - 2-Pack
Format 6 1/2"x24-36THx2PC
Article #34595863
Model #2500013
★★★★★ ★★★★★
0
(0)
FREUD
CIRCULAR SAW BLADE
Format 12"x80TH
Article #0696015
Model #TK407
★★★★★ ★★★★★
0
(0)
NORTON
Continuous Diamond Blade - "Classic" - 4"
Format 4"
Article #95045014
Model #07660702793
★★★★★ ★★★★★
0
(0)
eco
EXCHANGE-A-BLADE
Melamine Circular Saw Carbide Blade - 7" - 40TH
Format 7"x40TH
Article #3459023
Model #1014352
★★★★★ ★★★★★
0
(0)
FREUD
CIRCULAR SAW BLADE
Format 10"x80TH
Article #0696129
Model #TK706
★★★★★ ★★★★★
0
(0)
DEWALT
Carbide Circular Saw Blade - Construction - 60 TH - 10"
Format 10"x60TH
Article #0794135
Model #DW3106
★★★★★ ★★★★★
4.5
(44)
DEWALT
Dewalt Circular Saw Blade - Diamond Edge - 10"
Format 10"
Article #00276055
Model #DW4761
★★★★★ ★★★★★
3.7
(25)

Technical specifications

Component :Carbide Type :60-tooth Color :Yellow Utilization :Ultra fine finish Diameter :7.25" Arbor Size :5/8" (1.59 cm) Packaging :1 unité
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
DeWalt Carbide Circular Saw Blade - 60 TH - 7 1/4" is rated 4.7 out of 5 by 31.
Rated 5 out of 5 by from Excellent for Plywood Just cut out a bunch of plywood shelf tops with this saw blade and it cut perfectly. I had 3/4” plywood with an oak veneer and the edges are seamless. I would highly recommend this blade to make a finishing cut- especially plywood. [This review was collected as part of a promotion.]
Date published: 2019-05-05
Rated 5 out of 5 by from Outstanding performance My team uses saws all day every day. They were diehard Diablo fans until I bought a couple of these blades. Immediately they noticed a difference and have asked that this be our exclusive blade brand. Great job Dewalt! [This review was collected as part of a promotion.]
Date published: 2019-07-28
Rated 5 out of 5 by from Super Smooth Cut on MDF Melamine Laminate Shelf I needed to make a super clean cut a 1 inch thick MDF shelf which was covered with a laminate surface. After reading many reviews I settled on the DeWALT 60 Tooth blade which I installed on my ye olde Craftsman circular saw. What an amazing blade! Went through the MDF like butter and left a clean edge on the laminate. If you're going to use this blade with a laminate like mine I recommend that you: 1) Remember to put the finished side facing DOWN when you make your cut; 2) Think about using tape or something to protect the laminate surface from scratches while it is facing down; 3) Support the board you are cutting on both ends - if you don't the weight of the waste end will likely drop and cause the board and laminate to crack before your through the entire cut. 4) Make a couple test cuts on some scrap material to get used to how quickly this blade moves and to see if you're happy with the result. Would I recommend this blade? Absolutely YES. Unlike some reviews, I had no issue with transfer of the yellow paint on the blade to the board I was cutting. [This review was collected as part of a promotion.]
Date published: 2019-08-16
Rated 5 out of 5 by from Hardwood floor. I needed to cut a perfectly smooth line in my red oak floor. This cut soooo smoothly ... like butter! [This review was collected as part of a promotion.]
Date published: 2019-08-22
Rated 5 out of 5 by from Great blade Great blade for finer cuts. Still has decent cut speed even with 60 teeth [This review was collected as part of a promotion.]
Date published: 2019-07-18
Rated 2 out of 5 by from Broken teeth I’m not so sure about this blade, after a couple of weeks use I was cutting a piece of mahogany and it broke two teeth off of the blade. Mahogany is not that hard of a wood and it should have stood up to it with no problem. [This review was collected as part of a promotion.]
Date published: 2019-09-06
Rated 5 out of 5 by from works perfect, never had such a great cutting saw I've owned numerous circular saws in my almost 70 years of life, but none have worked as well as this one. You can feel the power of it immediately, the durability of it is obvious in the weight and strength in its construction. When cutting it never hesitated or even bucked once in use. When it's time to replace more tools, they're all being replaced by Dewalt brand tools. Not to mention it was an awesome price and great value. [This review was collected as part of a promotion.]
Date published: 2019-11-13
Rated 5 out of 5 by from Did the Job Bought it to rip a piece of 8 foot butcher block. Cut was clean and easy. Left minimal saw marks that were easily sanded away. [This review was collected as part of a promotion.]
Date published: 2019-08-26
  • y_2020, m_2, d_21, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_31
  • loc_en_CA, sid_00277171, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store