DeWalt Cup Brush - Knotted Wire - 1 Per Pack - 3-in Dia x 7/8-in Bristle L

Article #00275793 Model #DW4910 Format3"
DeWalt Cup Brush - Knotted Wire - 1 Per Pack - 3-in Dia x 7/8-in Bristle L
 

Description

Eliminate burrs and impurities from large surfaces with this DeWALT wire cup brush. Made of heat-treated carbon steel wire, the brush guarantees prolonged service on heavy-duty cleaning applications. The knotted-wire cup brush features a holding plate that ensures stability and safety. Use it to clean sheet metal, structural steel and castings.

Technical specifications

Component :Steel Color :Silver Diameter :3" Model :Knotted Wire Utilization :Metal Deburring, Weld Cleaning, Surface Preparation, Edge-Blending, Dust-Removal

You may also like

NORTON
Norton RightCut Right-Angle Abrasive Cut-Off Wheel - 5-in Dia x 1/8-in T - 7/8-in Arbor - Type 1-41 - Aluminum Oxide
Format 5x7/8x0.40"
Article #02075255
Model #07660701618
★★★★★ ★★★★★
0
(0)
NORTON
Norton Depressed Centre Wheel - 4 1/2-in Dia x 3/64-in T - 7/8-in Arbor - 24 Grit - Aluminum Oxide
Format 4.5x0.45x7/8"
Article #77375721
Model #66252843604
★★★★★ ★★★★★
5
(1)
NORTON
Norton RightCut Right-Angle Abrasive Cut-Off Wheel - 4-in Dia x 1/8-in T - 5/8-in Arbor - Type 1-41 - Aluminum Oxide
Format 4x0.40x5/8"
Article #02075253
Model #07660701616
★★★★★ ★★★★★
0
(0)
NORTON
Norton RightCut Metal Cut-Off Wheel - 4 1/2-in dia x 3/64-in T - 7/8-in Arbour - Type 1-41 - 60-Grit
Format 4.5x7/8x0.04"
Article #02075254
Model #07660701617
★★★★★ ★★★★★
0
(0)
DEWALT
DEWALT 4 1/2-in High-Performance Metal-Cutting Wheel 10-Pack
Format 4 1/2"xPK10
Article #00276392
Model #DW8062C10
★★★★★ ★★★★★
5
(1)
EXCHANGE-A-BLADE
EAB Stay Sharp Industrial Ultra-Thin Metal Cutting Flat Wheel - 4 1/2-in Dia x 3/64-in T - 7/8-in Arbor - Type 1
Format 4 1/2x3/64"
Article #34595870
Model #2140412
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Finishing Razor Back Multi-Purpose Metal Saw Blade - 4 1/2-in Dia - 7/8-in and 5/8-in DKO - Diamond Abrasive
Format 4 1/2"
Article #34595899
Model #3110402
★★★★★ ★★★★★
0
(0)
DEWALT
DeWalt Cup Brush - Crimped Wire - 1 Per Pack - 3-in Dia x 13/16-in Bristle L
Format 3"
Article #00275795
Model #DW4920
★★★★★ ★★★★★
4.1
(28)
NORTON
Norton Cut-Off Blade - Aluminum Oxide - 12-in dia - Metalworking
Format 12x1/8x1"
Article #95045037
Model #07660705494
★★★★★ ★★★★★
0
(0)
NORTON
Norton Masonry Cut-Off Wheel - 4 1/2-in Dia x 1/16-in T - 7/8-in Arbor - Type 1-41 - Silicon Carbide
Format 4 1/2x1/16x7/8"
Article #02075257
Model #07660701621
★★★★★ ★★★★★
0
(0)
DEWALT
DeWalt Cup Brush - Crimped Wire - 1 Per Pack - 4-in Dia x 1 1/8-in Bristle L
Format 4"
Article #00275798
Model #DW49101
★★★★★ ★★★★★
0
(0)
DEWALT
DeWalt Knotted Wire Wheel - 4-in dia - 5/8-11-in Arbour - Carbon Steel - Coarse
Format 4"
Article #00275797
Model #DW4930
★★★★★ ★★★★★
4.7
(21)
NORTON
Norton Metal Cut-Off Wheel Blade - 14-in Dia x 7/64-in T - 1-in Arbor - Type 1-41 - Aluminum Oxide
Format 14"x7/64"x1
Article #02075260
Model #07660789399
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Grinding Saw Razor Back Blade - Circular Shape - Diamond - Metal Cutting Utilization
Format 7"
Article #34595902
Model #3110432
★★★★★ ★★★★★
0
(0)
DEWALT
DeWalt Stringer Wire Wheel - Carbon Steel - 1 Per Pack - 4-in Dia x 7/8-in Bristle L
Format 4"
Article #00275796
Model #DW4925
★★★★★ ★★★★★
0
(0)
NORTON
Norton Metal Cutting Blade - Type 1 - Black - 10-in dia
Format 10x5/8 3/32"
Article #02075370
Model #07660789390
★★★★★ ★★★★★
0
(0)
DEWALT
DeWalt Cup Brush - Knotted Wire - 1 Per Pack - 4-in Dia x 1 1/8-in Bristle L
Format 4"
Article #00275794
Model #DW4916
★★★★★ ★★★★★
4.9
(28)
EXCHANGE-A-BLADE
EAB Finishing Razor Back Multi-Purpose Metal Saw Blade - 5-in Dia - 7/8-in and 5/8-in DKO - Diamond Abrasive
Format 5"
Article #34595900
Model #3110412
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Threaded Arbor Cup Brush - Carbon Steel - Crimped Wire - 1 Per Pack - 3-in Dia
Format 3"
Article #34595877
Model #2160438
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Stay Sharp Knotted Wire Brush Cup - 3-in dia - 5/8-11-in Threaded Arbour - Carbon Steel
Format 3"
Article #34595875
Model #2160429
★★★★★ ★★★★★
0
(0)
NORTON
Norton Metal Cutting Blade - Black - Aluminum Oxide - 7-in dia
Format 7x3/32"
Article #02075167
Model #07660789097
★★★★★ ★★★★★
0
(0)
NORTON
Norton Grinding Wheel - Aluminum Oxide - Type 27 - 4 1/2-in Dia x 7/8-in Arbour
Format 4.5x7/8x1/4"
Article #77375729
Model #66252843607
★★★★★ ★★★★★
0
(0)
NORTON
Norton Masonry Cut-Off Wheel - 5-in Dia x 1/16-in T - 7/8-in Arbor - Type 1-41 - Silicon Carbide
Format 5x1/16x7/8"
Article #02075258
Model #07660701622
★★★★★ ★★★★★
0
(0)
NORTON
Norton RightCut Type-1 Abrasive Cut-Off Wheel - 6-in Dia x 3/64-in T - 7/8-in Arbor - 60 Grit - Aluminum Oxide
Format 6x0.40x7/8"
Article #77375722
Model #07660702757
★★★★★ ★★★★★
0
(0)

What is the maximum RPM of this product

Asked by: Dgw1
  • y_2021, m_12, d_3, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_CA, sid_00275793, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
DeWalt Cup Brush - Knotted Wire - 1 Per Pack - 3-in Dia x 7/8-in Bristle L is rated 4.9 out of 5 by 28.
Rated 4 out of 5 by from Great for paint removal from cement Wear a respirator, earplugs, gloves, safety glasses and a full grinding shield. Also, physically isolate the area by taping plastic up around your working area. Purchase a 20" box fan (Lasko) and a couple 20"x20" furnace filters. Tape the filter to the inlet side of the fan and use this to clear the air in your working area. It's a secret trick and works a charm. I also recommend stepping up to the stainless steel version if you have a lot of area to cover. This Cup Brush did a great job on surfaces and into cracks. SERIOUSLY, wear the safety equipment and please watch for lead paint. Don't expose your kids to lead paint dust or they will suffer brain damage. Same warning goes for you. Assume the paint is lead and get the respirator to protect yourself. How often do you get to really wear one? They look cool and it tells everyone you are a smart craftsman.
Date published: 2015-07-03
Rated 5 out of 5 by from Does the job This brush does the job of basically sanding down masonry. It creates a lot of dust, as any sanding or scrapping might, but it does do the trick. Don't expect it to grind down masonry very fast. It takes a fair bit of time, as it should because concrete is meant to last.
Date published: 2014-01-21
Rated 5 out of 5 by from It removed flaking paint off my shed wall (24"X8") very well. The biggest plus was that it lost NONE of the twisted wires during the operation. Which is the general problem with twisted wire power brushs.
Date published: 2014-01-04
Rated 5 out of 5 by from The Gold Brush... ...even tho you can't use this in California. I got this to clean up some concrete edges in a damaged floor of a warehouse. It stirred up so much dust that I wished I would have bot some masks instead of holding my breath. The job would have gone faster. The brush was almost like new after I had finished. I doubt my lungs were.
Date published: 2014-05-30
Rated 5 out of 5 by from 3-in Knotted Cup Brush This Item works very well, I've used many different Brands of Cup Brushes and this one works great, the price is also good. But like all the others use your saftey shield, Gloves and Saftey Glasses when working with it. This Item is only as good as the user. I use these in my work, and I use about 3 or 4 a month, so far the Dewalt is out proformimg B.& D., and the others in proformance 2 to one, and price is about 1/3nd. the cost. I would tell a friend to us it.
Date published: 2014-11-08
Rated 4 out of 5 by from Saves a ton of time on paint removal I was using chemical stripper and a regular wire brush on the end of a drill. It took 8 hours just to get the hood of my van down to the metal. Switched to this with an angle grinder (corded works best) and I finished the rest of the whole van in 32 hours. I figure, given the area that I cleaned, I cut my time in half.
Date published: 2017-05-14
Rated 5 out of 5 by from cup brush This product is a little more expensive than others but is worth the price. it out lasted cheaper ones buy far
Date published: 2015-10-07
Rated 5 out of 5 by from DEWALT 3-in knotted [This review was collected as part of a promotion.] The sum and substance is this in a nutshell: buy the part that was made for the tool. You can attachments made by other manufacturers that say the attachments are reciprocal, but it never fits quite right. Buy the attachment from the brand of the tool that you're purchasing it for.
Date published: 2018-10-11
  • y_2021, m_12, d_3, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_en_CA, sid_00275793, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store