Digital Sliding T-Bevel

Article#01215292 Model#828 Format8"
Digital Sliding T-Bevel
 

Description

Measuring, reading and transferring interior or exterior angles. 8" stainless steel blade. Holds and transfers angles between work pieces. Auto shut-off feature with full LCD display. 0.3° accuracy. Range 0° - 360° (Resolution 0.05°). 3 V lithium battery (CR2032) included.

Technical specifications

You may also like

FULLER
Locking Measuring Tape - Plastic/Rubber - SAE/Metric - 25'
Format 1"x25'
Article #70155073
Model #750-0030
★★★★★ ★★★★★
0
(0)
FULLER
Fuller 3-Piece Level Set with Measuring Tape
Format 3PC
Article #01215278
Model #40-5711
★★★★★ ★★★★★
1
(1)
BOSCH
GLL30 Self-Leveling Cross-Line Laser Measure - 30'
Format 30'
Article #19836143
Model #GLL 30
★★★★★ ★★★★★
4
(53)
BOSCH
Distance Measuring Laser - BLAZER GLM20 - 65' Range
Format 0-65'
Article #19835938
Model #GLM20
★★★★★ ★★★★★
4.8
(4)
BOSCH
Laser Measuring Tool - 100 ft
Format 100'
Article #19835799
Model #GLM 30
★★★★★ ★★★★★
4.4
(43)
BOSCH
Self-Levelling Cross-Line Laser with Mounting Device - 40'
Format 40'
Article #19836291
Model #GLL40-20G
★★★★★ ★★★★★
4.2
(14)
BOSCH
Bosch Digital Multi Scanner - 9 V - Blue and Black
Format 9V
Article #19835505
Model #GMS120
★★★★★ ★★★★★
2.5
(2)
BOSCH
GLM42 Compact Laser Measure - 135'
Format 135'
Article #19836179
Model #GLM 42
★★★★★ ★★★★★
4.5
(39)
BOSCH
Combination Point and Line Laser Level
Article #19835765
Model #GLL 1P
★★★★★ ★★★★★
4
(1)
BOSCH
Bosch GTL2 Laser Level and Square
Article #19835434
Model #GTL2
★★★★★ ★★★★★
3
(2)
BOSCH
Green Laser Level - 200'/360° - 12 V - Bluetooth
Format 12Vx200'x360DG
Article #19836278
Model #GLL3-330CG
★★★★★ ★★★★★
3
(2)
BOSCH
Laser Distance Measurer - 165'
Format 165'
Article #19835926
Model #GLM50C
★★★★★ ★★★★★
0
(0)
BOSCH
GLL100 GX Self-Leveling Cross-Line Laser - 100'
Format 100'
Article #19836180
Model #GLL 100 GX
★★★★★ ★★★★★
4.2
(13)
BOSCH
Laser Measuring Tool - 35' Scope
Format 35'
Article #19835970
Model #GLM10X
★★★★★ ★★★★★
5
(2)
BOSCH
Self-Leveling Cross-line Laser Level - 40' range
Format 40'
Article #19836269
Model #GCL2-55
★★★★★ ★★★★★
4.4
(21)
BOSCH
Cross-Line Laser - Self-Leveling - 30' - Light Blue
Article #19836286
Model #GLL25-10
★★★★★ ★★★★★
3.8
(34)
BOSCH
Red Laser Level - 200' - Three 360° Planes
Format 200'x360DG
Article #19836277
Model #GLL3-300
★★★★★ ★★★★★
5
(4)
BOSCH
GLL3-15 Self-Leveling Three-Line Laser Measure - 50'
Format 50'
Article #19836072
Model #GLL 3-15
★★★★★ ★★★★★
4.1
(20)
FULLER
Ogee Cut Adapter
Article #01215203
Model #320-1755
★★★★★ ★★★★★
0
(0)
BOSCH
Tile and Square Layout Laser - 65'
Article #19835443
Model #GTL3
★★★★★ ★★★★★
5
(1)
BOSCH
5-Point Self-Leveling Alignment Laser - 100'
Article #19835427
Model #GPL 5 R
★★★★★ ★★★★★
4.1
(10)
BOSCH
GLM10 Laser Measure - 35'
Format 35'
Article #19836187
Model #GLM 10
★★★★★ ★★★★★
5
(2)
BOSCH
GLL2-20 Self-Leveling 360° Cross-Line Laser Measure - 65'
Format 360DG
Article #19836074
Model #GLL 2-20
★★★★★ ★★★★★
4.6
(21)
BOSCH
2-Point Self-Leveling Laser Level - 30'
Format 30'
Article #19835423
Model #GPL2
★★★★★ ★★★★★
4.7
(3)
BOSCH
Bosch Self Leveling Rotary Laser Level
Article #330746842
Model #GRL 250 HVCK
★★★★★ ★★★★★
3.3
(7)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Digital Sliding T-Bevel is rated 4.0 out of 5 by 42.
Rated 1 out of 5 by from I need to stop buy things that are made by General Was hoping to use this to measure angles for wood working but this things is kind of a joke. I'm not a tool snob and I usually don't mind Jerry rigging stuff in order to make it work but this is going back to Lowes ASAP. First off it isn't very well built. Second, if you have it on a flat surface and zero it, move it a few degrees and then move it back to zero, all while keeping it on the flat reference, it will read anywhere from 1 to 2 and sometimes 2.5 degrees off. Now, for building a house 1 or 2 degrees might not be an issue when putting in studs and such, but for making furniture, 1 degree can make or break a project. This thing is going back... If I can find the receipt...
Date published: 2016-12-11
Rated 4 out of 5 by from A decent Product The digital readout is easy to use and the item is fairly accurate. I tested in on my drafting triangles and it was always within about half of a degree.
Date published: 2016-01-15
Rated 2 out of 5 by from Has signifigant play between the moving parts Would have gone 3 stars except that lowes lists the accuracy as .05 degrees. On the package it states .3 degrees. In practice, it's over a degree non accurate due to the knife slipping inside the gauge. If you only move it in one direction, for example open it or close it, it's accuracy is darn good. If you wiggle it to find the angle, forget it. I also had the screw pop off while putting it away. I think I may take mine apart and glue the slide into a fixed position. Overall I think it will be usefull for stave drum building and tool set up. I like that I can read the gauge. My eyes aren't good enough to spot a good line up anymore. A bit disappointed, but I would recommend as long as you understand where the flaw is.
Date published: 2016-12-11
Rated 5 out of 5 by from Great tool for your back pocket , easy to use find that unknown angle of the corner that should be 90 may not be , check it before you cut the expensive molding You can flip the angle to have the missing angle (or opposite ) side of the angle Of coarse to make sure get out you old true square put he unit on your square and "zero" the T bevel now you have a true square device to work with.
Date published: 2016-10-02
Rated 1 out of 5 by from Very poorly built Not very accurate, has play in it. First one I bought the interior screw came loose first day pining the slide from opening. Returned it and the next one had the screw holding the metal disk even though it was tight in my belt backed itself loose and fell out while I was putting it away somewhere in the yard. They need to have a weld or something at the end of the screw so it doesn't fall apart all of the time! Second time it's happened 30 bucks and two trips to the store across town wasted...
Date published: 2016-07-20
Rated 4 out of 5 by from Good for Quick Jobs I purchased this Bevel Gage and it worked for the quick job I was completing. Calculate the angle, set the saw, cut the wood, perfect angle. However, the method to zero the gage seems straightforward but the rounded portion of the metal blade does not fit well within the handle. I had to double check that the blade was straight. Yes, I am a perfectionist. I rated this product as a 5 because the gage performed as expected and the result was exactly what I wanted. If there were an option for a 4.9 rating, I would have opted for that rating instead. [This review was collected as part of a promotion.]
Date published: 2018-08-04
Rated 5 out of 5 by from under $30 it is a no brain-er. I have older bevel gauges that one has to transfer the angle to a protractor. This is a good tool. I even use it for setting my metal lathe tool post angle. I also have one at school where I teach applied mathematics. Mathematics for the Machine Trades. One must understand your geometry- supplementary-complementary angles.
Date published: 2016-01-18
Rated 5 out of 5 by from T-Bevel digital I have been looking at these for quite a while and finally bought one. I really like it and use it for doing segmented bowls. If the angle is not right the gaps between the segments will have gaps. I was never a fan of sliding bevels but this one is really nice and worth having.
Date published: 2017-07-03
  • y_2020, m_10, d_23, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_42
  • loc_en_CA, sid_01215292, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store