DeWalt(R) Door Lock Installation Kit - M3 Steel

Article#0027250 Model#D180004
DeWalt(R) Door Lock Installation Kit - M3 Steel
 

Description

Secure your door in just seconds with this door lock installation kit from DeWalt®. It comes with a pair of bi-metal hole saws that feature an optimized tooth design. The kit works on both metal and wood doors and contains the most used sizes so it's compatible with the most common sizes of backsets and thicknesses of doors. The hole saws are made of M3 Steel for a longer life and feature hardened backing plates to prevent warping so they remove from the mandrel easily. This DeWalt® lock installation kit features a C-clamp to hold it in place while you work. There's no need to measure anything, as the template is pre-sized. Use a power drill or driver to run the hole saws.

You may also like

EXCHANGE-A-BLADE
Exchange-a-Blade Hole Saw - Bi-Metal - 4 1/8''
Format 4 1/8"
Article #3459088
Model #1054842
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
4-IN HOLE SAW
Format 4"
Article #3459089
Model #1054852
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
4 1/4-IN HOLE SAW
Format 4 1/4"
Article #3459090
Model #1054862
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
4 1/2-IN HOLE SAW
Format 4 1/2"
Article #3459091
Model #1054882
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Door Lock Installation Kit - Carbon Steel - 7/Pack
Article #00276956
Model #CMAH1WDL
★★★★★ ★★★★★
4.4
(7)
DEWALT
Bi-Metal Hole Saw - 2 3/4"
Format 2 3/4"
Article #0794365
Model #D180044
★★★★★ ★★★★★
0
(0)
LENOX
2-in Hole Saw
Format 2"
Article #79915180
Model #1211932DGHS
★★★★★ ★★★★★
4.9
(19)
BOSCH
1 3/4-in Hole Saw
Format 1 3/4"
Article #19835309
Model #HB175
★★★★★ ★★★★★
0
(0)
VERMONT AMERICAN
Bi-Metal Hole Saw - 2"
Format 2"
Article #1354095
Model #18532
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
5-IN HOLE SAW
Format 5"
Article #3459092
Model #1054902
★★★★★ ★★★★★
0
(0)
BOSCH
4-in Hole Saw
Format 4"
Article #19835325
Model #HB400
★★★★★ ★★★★★
0
(0)
DEWALT
Bi-Metal Hole Saw - 3 1/2"
Format 3 1/2"
Article #0794367
Model #D180056
★★★★★ ★★★★★
0
(0)
LENOX
Hole Saws - Set of 4 Hole Saws
Format ST4
Article #79915181
Model #12158DGDS4A
★★★★★ ★★★★★
5
(1)
BOSCH
3 1/2-in Hole Saw
Format 3 1/2"
Article #19835321
Model #HB350
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Hole Saw - With Arbor - Bi-Metal - 2 1/2"
Format 2 1/2"
Article #00276917
Model #CMAH1212A
★★★★★ ★★★★★
4.6
(10)
LENOX
HOLE SAW MANDREL
Format 1 1/4-6"
Article #79915268
Model #1779670
★★★★★ ★★★★★
4.5
(22)

Technical specifications

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
DeWalt(R) Door Lock Installation Kit - M3 Steel is rated 4.2 out of 5 by 101.
Rated 5 out of 5 by from DeWalt bi-metal door lock installation kit After reading several other comments before purchasing, I did this: First of all, I ran a 1/2-20 tap back and forth with my fingers in the threads of both hole saws. It removed some paint over spray. then I put a small dab of grease (wheel bearing) on the mandril threads. I then sprayed both inside and outside of the hole saws with silicone spray. AS DIRECTED, drill the 1" hole first, then switch to the 2 1/8" hole next. I pulled both hole saws out 1/2 way thru to remove the build up of wood/metal inside of the round saw. then re-sprayed with silicone and finished the hole. Use some finesse while drilling. This tool does a terrific job.
Date published: 2012-10-05
Rated 5 out of 5 by from Essential tool for anyone needing a new knob The doors in my house all either had missing hardware, mis-matched knobs (gold on one side, silver on the other),or no knobs at all. I ordered 9 brand new, antique looking knobs to go with the old doors... and found the holes in the doors were nowhere near big enough for modern knob hardware. I tried to use a holesaw to cut one, but it was a losing battle of sliding saw and gouged door. I picked up this unit, set the holes to the size needed, and had all nine doors cut and ready for knobs in less than 2 hours. Very, VERY slick. Worth the money even if I never ever use it again.
Date published: 2013-12-13
Rated 5 out of 5 by from New lock-set, old door... We were remodeling our home office and that included a new handle for the door to the garage. (A solid core door, fire rated) But the existing set was a smaller hole than the new standard lock-set. But by using this Dewalt kit and saws I was able to align the existing bolt with the fixture and drill the new size hole for the late model lock-set. No filling the existing hole, just let the Dewalt guide the hole saw for a perfect fit. Made a nightmare into a sweet dream indeed. I considered another kit, but could see where the Dewalt was worth the little extra it cost. ($5 difference) I buy tools based on there suitability for the job at hand. And this worked better than I had hoped.
Date published: 2014-05-07
Rated 5 out of 5 by from Great For Re-Drilling Metal Insulated Entry Door I decided to go with the Dewalt Door Lock Installation Kit, rather than the cheaper Irwin model, based on slightly better reviews. I do not regret that decision. First, the Dewalt kit is more heavy duty than the Irwin model. I liked the fact that it was clamped tight to the door, rather than screwed into the door, giving more stability while drilling. I only had to re-drill the deadbolt hole, as that was the only one that was smaller than the rest. After adjusting the backset to the correct length, and tightening down the clamp, the drilling went smooth. I set my drill to the highest speed, and kept a small amount of pressure, and the hole was widened within 10 seconds per side. A small amount of the plastic guide was shaved off, but not bad. There was little, to no movement of the plastic guide. The new deadbolt lined up perfectly, with minimal play. As others have stated, there are no instructions on how to separate the saw from the mandrel. Just remove the screw, holding the guide bit in the mandrel, stick a thin screwdriver through the slots of the hole saw, and use a wrench or channel locks to unthread the saw from the mandrel. To make things easier, I sprayed the threads of the mandrel with lubricant, before tightening the hole saw onto it. I can't comment on how well the guide, and saw hold up after multiple uses, but it worked great for my one time use. The saw still looks to be in perfect condition, and the plastic guide is just missing minimal plastic, inside the guide hole. I am satisfied with how it cut through my metal insulated entry door.
Date published: 2013-04-16
Rated 5 out of 5 by from Simplified a complicated job. I recently had someone break into my home and had to install a dead bolt lock system. this tool made the job so easy. Great purchase! Cynthia from Portland, Maine
Date published: 2013-11-18
Rated 4 out of 5 by from Great purchase for ease of use. We live in an older house with original 1940's vintage doors, most of which were not cut completely out for modern door knobs. Since there is no material in the middle on the existing holes, a hole saw by itself will not work. With this jig, I can line up the cuts and put newer knobs in with ease. My complaint is with the arbor for the hole saws. For a couple extra dollars the easy change type arbor could be included. Other than that, it is a great product.
Date published: 2013-12-09
Rated 5 out of 5 by from DeWalt Door Lockset Boring Fixture Good design and easy to use. Made boring a door for a lock-set simple, accurate and quick, or should have. The fixture I bought had the wrong size mandrel hole and thread on the larger hole saw. I had to borrow a mandrel with the proper sized hole and thread to finish the job. I got lucky. Apparently there was a mix up during packing at the factory and the hole saws packaged were for different mandrels. Took the fixture back to Lowes the next day and exchanged it for a new one with a matched set of hole saws no problem. I looked at every one on the shelf and all of them were correct. I just got the fluke. Lowes was great. The associate was apologetic and exchanged the item without question. I love Lowes.
Date published: 2014-04-23
Rated 3 out of 5 by from Better than the other low end hole saw kits Hole saw kit is a little better than the other low end kits but still walks a little when drilling the big hole. Good for boring a few doors though.
Date published: 2014-12-28
  • y_2019, m_8, d_19, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_101
  • loc_en_CA, sid_0027250, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store