Dremel EZ Lock Cut-Off Wheels - 1 1/2-in - Fibreglass Reinforced - Pack of 5

Article #1916271 Model #EZ456 FormatCR/5
Dremel EZ Lock Cut-Off Wheels - 1 1/2-in - Fibreglass Reinforced - Pack of 5
 

Description

The Dremel EZ lock cut-off wheel design lasts two times longer than current fiberglass-reinforced cut-off wheels. The rotary tool cut-off wheel has labelling to offer easy identification. The cut-off wheel for metal is compatible with all Dremel rotary tools. Its EZ lock design makes accessory changes six times faster than a standard mandrel.

Technical specifications

You may also like

EXCHANGE-A-BLADE
Multi-Tool Wood Flush Cut Blade - 1 1/4"- 5-Pack - Industrial - Exchangeable
Format 1 1/4"xPK5
Article #34595725
Model #1070222
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Multi-Tool Flush/Precision Cuts Blade - 1.375'' - 5 Pack - Recyclable
Format 1 3/8"x5PC
Article #34595997
Model #1071582
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Professional Oscillating Blade Tools - Flush Cut - Steel - Set of 4
Format 1 1/4"x2 3/4"xPK4
Article #09065021
Model #1070212
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Flush Cut Multi-tool - Recyclable Bi-metal - 1 3/8-in W - Pack of 5
Format 1 3/8"x5PC
Article #34595998
Model #1071592
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Universal Oscillating Flush Cut Blades - High-Carbon Steel - 5 Per Pack - 1 3/8-in W
Format 1 3/8"x5PC
Article #34595996
Model #1071572
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Universal Oscillating Flush Cut Blades - Bi-Metal -5 Per Pack - 1 1/4-in W
Format 1 1/4"xPK5
Article #34595736
Model #1070232
★★★★★ ★★★★★
1
(1)
DREMEL
Dremel Carbide Oscillating Tool Blade - 1 1/4-in W - Universal Quick Fit - Flush Cutting
Format 1 1/4"
Article #19165117
Model #MM485
★★★★★ ★★★★★
3.5
(98)
BOSCH
Bosch Starlock Oscillating Multi-Tool Accessory Blades - Black - Set of 3 - 1 1/4-in W
Format 3PC
Article #19835955
Model #OSL003VP
★★★★★ ★★★★★
5
(1)
DREMEL MULTI-MAX
Dremel Multi-Max Flush Cut Blade - 1 1/4-in W - High-Speed Steel - Black
Format 3/4x1/16"
Article #19165100
Model #MM482
★★★★★ ★★★★★
4
(38)
EXCHANGE-A-BLADE
EAB Universal Oscillating Flush Cut Blade - High-Carbon Steel - 1 Per Pack - 3 1/2-in L x 1 1/4-in W
Format 1 1/4x3.5"
Article #34595673
Model #1070022
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Professional Speedy Flush Cut Blades - 2 3/4-in W - 1 1/4-in Cutting Depth - High-Carbon Steel - 3 Per Pack
Format 2 3/4"x3/PK
Article #34595951
Model #1070492
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Universal Oscillating Speedy Flush Cut Blade - High-Carbon Steel - 1 Per Pack - 3 1/2-in L x 2 3/4 in W
Format 2 3/4x3 1/2"
Article #34595676
Model #1070252
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
Oscillating Tool Blade Kit - 3 Pieces - Exchangeable
Format 3PC
Article #34595989
Model #1070502
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Starlock Oscillating Plunge Cut Blades - Bi-Metal - 3 Per Pack - 4-in L x 1 1/4-in W
Format 1 1/4"xPK3
Article #19835961
Model #OSL114F-3
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Universal Oscillating Flush Cut Blade - Bi-Metal - 1 Per Pack - 3 1/2-in L x 1 1/4-in W
Format 1 1/4x3 1/2"
Article #34595674
Model #1070042
★★★★★ ★★★★★
0
(0)
ROTOZIP
RotoZip Guidepoint Bits - Steel - 8 Per Pack - 1/8-in Dia
Format ST8
Article #19165060
Model #GP8
★★★★★ ★★★★★
4.7
(20)
EXCHANGE-A-BLADE
EAB Professional 2 1/2-in Grout Removal blade for Oscillating Tool - 1/8-in Cutting Depth - Heavy-Duty - Steel
Format 3x3.5"
Article #34595729
Model #1070102
★★★★★ ★★★★★
0
(0)
ROTOZIP
RotoZip Drywall Drill Bits - 1/8-in - High-Speed Steel - Pack of 16
Format 1/8"xCR16
Article #19165075
Model #GP16
★★★★★ ★★★★★
5
(1)
BOSCH
Bosch Starlock Oscillating Plunge Cut Blade - Bi-Metal - 1 Per Pack - 4-in L x 2 1/2-in W
Format 2 1/2"
Article #19835965
Model #OSL212F
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Starlock Oscillating Plunge Cut Blades - Carbide Teeth - 2 Per Pack - 4-in L x 1 1/4-in w
Format 1 1/4"xPK2
Article #19835959
Model #OSL114C-2
★★★★★ ★★★★★
0
(0)
DREMEL
Dremel Multi-Max Oscillating Grout Removal Blade - Carbide - 1 Per Pack - 2 3/4-in L
Format 1/16"
Article #1916311
Model #MM501
★★★★★ ★★★★★
4.2
(11)
DREMEL
Dremel Multi-Purpose Starter Kit - 110-Piece Set - Assorted Bits and Accessories - Reusable Storage Case
Format 110PC
Article #19836190
Model #709-02
★★★★★ ★★★★★
4.8
(4)
DREMEL
BLADE FR WOOD/MET.
Format 3/4"x3PC
Article #19165062
Model #MM422B
★★★★★ ★★★★★
2
(2)
EXCHANGE-A-BLADE
EAB Tool Hook and Loop Pad Professional Oscillating Accessory - 3" - Exchangeable
Format 3x3.5"
Article #34595675
Model #1070122
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Dremel EZ Lock Cut-Off Wheels - 1 1/2-in - Fibreglass Reinforced - Pack of 5 is rated 4.0 out of 5 by 73.
Rated 3 out of 5 by from Less Isn't More I have both a corded and cordless Dremel that I use constantly and love them both. My only complaint came recently. I use the EZ Lock cut off wheels for everything, so I picked up 5 of the 12 pack bulk containers. Yesterday I went to get a fresh pack from my shop and it was rattling. After digging into the container I discovered the spring had not been installed. That was no big issue but then I counted the discs, there was only 11. This had me curious so I counted the remaining 4 packs. Low and behold 2 of the 5 of the packs held only 11 discs. I just wonder if this is a standard practice and how many packs over the years were 1 or 2 short.
Date published: 2019-10-06
Rated 4 out of 5 by from EZ Lock Metal Wheels Love the easy lock. Used this to cut and fabricate industrial Stainless steel! The wheels did not bend, bind or break. Wore out fairly quickly but they cut very cleanly. A pretty tough job for these little guys but they got in where a large grinder wouldn't even think of fitting.The EZ was lock a plus when changing the blades as I didn't have to get out my little wrench.
Date published: 2011-12-14
Rated 1 out of 5 by from Poor quality with high failure rate I dont usually write reviews, but in this case I feel compelled to comment. These cutting disks are absolutely terrible. They fail at an astronomical rate. The failure mode is separation of metal insert from fiberglass disk (see photo included). I’ve had two failures when installing new disk onto Dremel before being actually used. The metal insert separated from fiberglass disk in my hand. I recently had 5 disks fail out of 10 new items. When failure rates are this high, the manufacture has to know. Is this a bad production run or a systemic quality issue? Maybe engineering design issue? In any event dont buy a Dremel tool for the EZ lock cutting disk. You will be disappointed.
Date published: 2021-02-24
Rated 3 out of 5 by from Great, IF they work. I purchased my dremel a few years back. I love the variable speed dial. I use it mainly to cut small projects of metal with the ez lock discs, but in the 6 or so 12 packs I have purchased, probably 1/4 to 1/3 break the center collar, many instantly. I have probably paid for 2+ multipacks just to throw away because they break. I recently bought a new pack, which I was forced to open up, because my previous pack broke 4 of the remaining few discs almost instantly, and.noticed the center collar is different. Great, but I still have spent a good chunk of change on the ones I had n to throw away. Dont get me wrong, I love my Dremel, but it sucks that I tossed so many.
Date published: 2020-04-28
Rated 2 out of 5 by from Works great! When it works... As part of my job, I frequently have to cut metal door frames. I’ve always used a Dremel to do so, frequently with the EZ-Lock cutoff wheels. I don’t know what happened, but it certainly seems like the manufacturing quality has taken a HUGE step backwards. These wheels do a fantastic job of cutting the metal, but, lately, I have had to deal with the center ring popping off of the wheels. Never used to happen. Now, it’s about a 50/50 shot (at best) of actually using all of the wheel before the collar falls off. Happened to 8 of the wheels in the 12-pack that I bought, expecting that it would get me through this job. I now have to stop, mid-project, and run out to get more cutoff wheels. Going with the standard style this time. I’m sick of wasting my money.
Date published: 2019-11-13
Rated 5 out of 5 by from CUTS THROUGH HARDENED STEEL LIKE BUTTER I recently bought a live center for the tail piece on my minilathe The shaft on it was 6 in.long and stuck out about 3 in.too far from the tail piece. I needed that 3 in. because I only had about 10 in. between centers on my lathe. My wife had recently bought the EZ Lock system with the EZ 456 wheels for Christmas. I chucked the shaft up and slowly fed the cutter through the shaft being careful not to build up too much heat. It did a perfect cut leaving me with the added space I needed. You can't force feed the cutter or twist it off center while cutting. This will leave you with a stack of broken cutters. A slow and easy common sense approach works best. If the cutters get wet they will break off too.
Date published: 2016-02-05
Rated 3 out of 5 by from Great Metal Cutter, poor locking system [This review was collected as part of a promotion.] Wheels cut like a dream, however at about the 50% point of wear, the ezlock spindle on the wheel separates from the cutting material and you have to put on a new wheel, for the extra cost you get less cutting time than you had with the old wheels, but can change wheels faster (using more wheels).
Date published: 2018-12-10
Rated 1 out of 5 by from NOT SATISFIED On almost every one of the EZ Lock cutting wheels I got in my kit, the metal ring ripped off from the actual cutting wheel making the tool useless after only a short time of cutting. Wheel had plenty of meat left on it if I could attach it to something.
Date published: 2015-10-23
  • y_2021, m_9, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_73
  • loc_en_CA, sid_1916271, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store