Easy Heat Automatic Control - 1200 w - White

Article#0356010 Model#RS2 Format1200W
Easy Heat Automatic Control - 1200 w - White
 

Description

Built-in humidity sensor. Turns system on when there is water and when temperature stays under 4º C.

Technical specifications

You may also like

EASYHEAT
Roof deicing cable
Format 60'X300W
Article #0356009
Model #ADKS-300CL
★★★★★ ★★★★★
3.9
(14)
EASYHEAT
Roof deicing cable
Format 100'X500W
Article #0356011
Model #ADKS-500CL
★★★★★ ★★★★★
4.6
(9)
EASYHEAT
Roof deicing cable
Format 30'X150W
Article #0356022
Model #ADKS-0150
★★★★★ ★★★★★
4.1
(10)
EASYHEAT
EasyHeat(R) De-Icing Kit - Roof/Gutter - 20' - 5 W - 120 V
Format 20' 5W 120V
Article #03565048
Model #ADKS100
★★★★★ ★★★★★
0
(0)
EASYHEAT
Roof deicing cable
Format 240'X1200W
Article #0356023
Model #ADKS-1200
★★★★★ ★★★★★
0
(0)
EASYHEAT
Roof deicing cable
Format 80'X400W
Article #0356018
Model #ADKS-400CL
★★★★★ ★★★★★
0
(0)
EASYHEAT
DE-ICING CABLE
Format 200'X1000WX120V
Article #0356001
Model #ADKS-1000
★★★★★ ★★★★★
3.7
(3)
EASYHEAT
ROOF DEICING CABLE
Format 160'X800W
Article #0356021
Model #ADKS-800CL
★★★★★ ★★★★★
5
(1)
EASYHEAT
Tape - Automatic Heating Tape
Format 210WX30'
Article #0356031
Model #AHB130
★★★★★ ★★★★★
4.5
(34)
EASYHEAT
Tape - Automatic Heating Tape
Format 420WX60'
Article #0356033
Model #AHB160
★★★★★ ★★★★★
0
(0)
EASYHEAT
Tape - Automatic Heating Tape
Format 63WX9'
Article #0356026
Model #AHB019A
★★★★★ ★★★★★
0
(0)
EASYHEAT
Tape - Automatic Heating Tape
Format 84WX12'
Article #0356027
Model #AHB112A
★★★★★ ★★★★★
4.6
(31)
EASYHEAT
Freeze Protection Cable
Format 21W 3' 120V
Article #0356024
Model #AHB013A
★★★★★ ★★★★★
0
(0)
STELPRO
Stelpro Heating Cable - Polymer - 53.1' - 203 W - 240 V
Format 53.1'-203W-240V
Article #03915257
Model #SCU2W0203S019
★★★★★ ★★★★★
0
(0)
STELPRO
Floor Heating Cable - 88.2' - 338 W - 240 V - White
Format 88.2'-338W-240V
Article #03915259
Model #SCU2W0338S030
★★★★★ ★★★★★
0
(0)
EASYHEAT
Tape - Automatic Heating Tape
Format 126WX18'
Article #0356028
Model #AHB118
★★★★★ ★★★★★
3.3
(4)
EASYHEAT
Tape - Automatic Heating Tape
Format 42WX6'
Article #0356025
Model #AHB016A
★★★★★ ★★★★★
0
(0)
EASYHEAT
Tape - Automatic Heating Tape
Format 105WX15'
Article #0356029
Model #AHB115A
★★★★★ ★★★★★
0
(0)
STELPRO
Floor Heating Cable - 70.6' - 270 W - 240 V - White
Format 70.6'-270W-240V
Article #03915258
Model #SCU2W0270S025
★★★★★ ★★★★★
0
(0)
STELPRO
Floor Heating Cable - 141' - 540 W - 240 V - White
Format 141'-540W-240V
Article #03915262
Model #SCU2W0540S047
★★★★★ ★★★★★
0
(0)
STELPRO
Floor Heating Cable - 105.8' - 405 W - 240 V - White
Format 105.8'-405W-240V
Article #03915260
Model #SCU2W0405S036
★★★★★ ★★★★★
0
(0)
STELPRO
Floor Heating Cable - 211.6' - 810 W - 240 V - White
Format 211.6'-810W-240V
Article #03915264
Model #SCU2W0810S069
★★★★★ ★★★★★
0
(0)
STELPRO
Floor Heating Cable - 124.1' - 475 W - 240 V - White
Format 124.1'-475W-240V
Article #03915261
Model #SCU2W0475S042
★★★★★ ★★★★★
0
(0)
STELPRO
Floor Heating Cable - 176.3' - 675 W - 240 V - White
Format 176.3'-675W-240V
Article #03915263
Model #SCU2W0675S058
★★★★★ ★★★★★
0
(0)
STELPRO
Stelpro Heating Cable - Polymer - 35.3' - 135 W - 240 V
Format 35.3'-135W-240V
Article #03915256
Model #SCU2W0135S013
★★★★★ ★★★★★
0
(0)

I am looking to find an installation company or person for my Easy Heat Rs-2 cables on a steep 2 storey roof. Can you suggest someone? I've called a couple of roofing companies without success. Thank you!

Asked by: Gatski
Hi Gatski, this is Marco at Marco roofing LTD. we can help you with installation of this product We charge $75.00 per hours for those calls with a minimum of 2 hours charges. let me know if you need our services. [email protected] 403-968-1057
Answered by: Marco42
Date published: 2017-03-15
  • y_2020, m_11, d_29, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_CA, sid_0356010, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Easy Heat Automatic Control - 1200 w - White is rated 2.6 out of 5 by 5.
Rated 1 out of 5 by from On, except when you need it Installed with an easy heat 200' wire. I noticed when it was 20 degrees out but no snow or ice that the controller was on. I switched off the breaker until it actually started to snow and turned it back on. To my surprise, it never switched on. 24 degrees out, the sensor wire covered in snow and ice, and it doesn't turn on. The lighted plug is lit, and the power light comes on for half a second if I bang on the controller. In the end; I unplugged the controller, beat it to dust with a hammer, and just plugged the heat wire in for now. Waste of money, on the plus side, the friendly people at lowes had no clue that this just a controller and contained no wire.
Date published: 2015-01-05
Rated 5 out of 5 by from Savings Overall The automatic roof heat cable control's main benefit is it greatly reduces power usage, and with the larger heat tapes that can be major savings. You do need to get the sensors located correctly to function, and if the roof has no gutter the run off from heat tape can form ice on the sensor lines if not located above this.
Date published: 2014-03-03
Rated 1 out of 5 by from Needs Better Design I have had cables on my roof for several years and they always worked well. I added this controller for this season so that I could automate the system and be able to go away and not worry about it. I installed the controller in the fall and followed all the instructions. The moisture sensor cable is at one end of the roof where the controller is mounted close to the power receptacle and at the beginning end of the heat cable. I now have about 18" of snow on the roof and it is melting and forming icicles along the roof edge and the system just won't turn on. I think the end corner of the roof where the sensor is installed is not melting enough but everywhere along the center it is a bit warmer from the attic so the sensor does not see enough moisture. Water is showing on the siding, a sure sign that it's beginning to back up. I have bypassed the controller to get the system working. The design flaw is that it is difficult to place the moisture sensor in the best location for detecting moisture. I called Easy-Heat and they agree that this is not an unusual problem. So be very careful where you place the moisture sensor and make sure it is in a location where it will see moisture along at least a 10" length. I think if they put a longer lead on the moisture sensor and highlighted this potential issue in the instructions it might be a significant improvement.
Date published: 2015-02-11
Rated 5 out of 5 by from Roof Heat Cable solution I'm an electrical contractor and have installed these for years. Very economical and reliable way to control heat cable.
Date published: 2014-04-24
Rated 1 out of 5 by from EasyHeat ADKS Roof Heat Cable Controller This item did not work even when sensor encased in ice! Very disappointing. Should have heeded prior reviews. [This review was collected as part of a promotion.]
Date published: 2019-11-21
  • y_2020, m_11, d_29, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_CA, sid_0356010, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store