Cobra FlipToggle Bolt Anchors - 3/16-in Dia x 2 1/2-in L - Plastic - 10 Per Pack

Article #04845652 Model #420R Format3/16"x2.5"xPK10
Cobra FlipToggle Bolt Anchors - 3/16-in Dia x 2 1/2-in L - Plastic - 10 Per Pack
 

Description

Install electrical boxes, wall-mounted TVs and various fixtures securely by using the pack of 10 FlipToggle anchor with bolts. They require a 1/2-inch pilot holes to ensure easy installation. These hollow anchors with bolts have a convenient mechanism that flips and tilts to provide a secure, steady hold. They measure 2 1/2 in L x 3/16 in Dia and come in variety of packs and sizes.

Technical specifications

Component :Nylon/zinc Color :White Packaging :10/pack Installation :Screws #10 x 2 1/2" (Included) Width :3/16" (0.48 cm) Length :2 1/2" (6.35 cm) Bit :1/2" (Non-included) Model :FlipToggle® Style :With bolts Thread Type :24 pitch Capacity :120 lb (54 kg)

You may also like

COBRA
Cobra WallDriller Drywall Anchor - #8 - 10 Per Pack - Nylon - Screws Included
Format #8xPK10
Article #0484473
Model #029R
★★★★★ ★★★★★
0
(0)
SIKA
AnchorFix 3001 Epoxy Anchoring Adhesive - 250-ml
Format 250ML
Article #66145017
Model #456434
★★★★★ ★★★★★
4
(2)
COBRA
Cobra WallDriller Drywall Anchor - #8 x 1 1/2-in - 100 Per Pack - Nylon - Screws Included
Format #8LxPK/100
Article #0484403
Model #021T
★★★★★ ★★★★★
0
(0)
COBRA
Cobra WallDriller Drywall Anchor - #8 - 100 Per Pack - Zinc - Screws Included
Format #8xPK100
Article #0484480
Model #041T
★★★★★ ★★★★★
0
(0)
COBRA
Cobra WallDriller Drywall Anchor - #8 - 10 Per Pack - Zinc - Screws Included
Format #8xPK10
Article #0484478
Model #042R
★★★★★ ★★★★★
5
(1)
FLIP TOGGLE
Cobra FlipToggle Bolt Anchors - 1/4-in Dia x 2 1/2-in L - Plastic - 10 Per Pack
Format 1/4"x2.5"xPK10
Article #04845651
Model #425R
★★★★★ ★★★★★
5
(2)
COBRA
Cobra WallDriller Drywall Anchor - #6 - 12 Per Pack - Nylon - Screws Included
Format #6xPK12
Article #0484472
Model #016R
★★★★★ ★★★★★
0
(0)
COBRA
Cobra WallDriller Drywall Anchor - #8 x 1 1/2-in L - 25 Per Pack - Nylon - Screws Included
Format #8LxBT/25
Article #0484167
Model #021M
★★★★★ ★★★★★
5
(1)
COBRA
Cobra TripleGrip Anchors - #8 - Plastic - 15 Per Pack - Includes 15 screws and 1/4-in Drill Bit
Format #8
Article #0484437
Model #171R
★★★★★ ★★★★★
4.1
(47)
COBRA
Cobra WallGripper Drywall Anchor - #8 - 8 Per Pack - Screws Included - Zinc-Plated
Format #8xPK/8
Article #0484163
Model #750R
★★★★★ ★★★★★
2.5
(4)
COBRA
Cobra WallDriller Drywall Anchor - #8 - 25 Per Pack - Zinc - Screws Included
Format #8LxBT/25
Article #0484168
Model #041M
★★★★★ ★★★★★
0
(0)
COBRA
Cobra Drywall Plastic Anchors - White Color - Type #10 - 10-pack
Format #10
Article #0484428
Model #172R
★★★★★ ★★★★★
4.5
(47)
COBRA
Cobra Plastic Screw Anchors - #8, 1 1/4-in L - 75 Per Pack - Blue - Screws Sold Separately
Format 1 1/4"xBX75
Article #0484173
Model #193M
★★★★★ ★★★★★
0
(0)
COBRA
Cobra WallDriller Drywall Anchor - #6 x 1-in - 50 Per Pack - Screws Included
Format #6xBT/50
Article #0484169
Model #013M
★★★★★ ★★★★★
0
(0)
COBRA
Cobra WallDriller Drywall Anchor - #6 x 1-in - 200 Per Pack - Nylon - Screws Included
Format #6xPK/200
Article #0484402
Model #013T
★★★★★ ★★★★★
5
(1)
COBRA
Cobra DrillerToggle Drywall Anchor - 3/16-in Dia x 2 L - 6 Per Pack - Bolts Included
Format 3/16"x2"xPK/6
Article #0484401
Model #363R
★★★★★ ★★★★★
4.1
(9)
COBRA
Cobra WallDriller Drywall Anchor - #6 - 12 Per Pack - Zinc - Screws Included
Format #6xPK12
Article #0484477
Model #034R
★★★★★ ★★★★★
0
(0)
COBRA
Cobra TripleGrip Anchors - #6 - Plastic - 20 Per Pack - Includes 20 screws and 1/4-in Drill Bit
Format #6
Article #0484443
Model #170R
★★★★★ ★★★★★
0
(0)
COBRA
Cobra TripleGrip Anchors - #12 x 1 3/4-in L - Plastic - 8 Per Pack - Includes 8 screws and 3/8-in Drill Bit
Format #12
Article #0484422
Model #173R
★★★★★ ★★★★★
4.1
(42)
COBRA
Cobra 128-Piece Pro Anchor Kit
Format 128PC
Article #04845779
Model #9701
★★★★★ ★★★★★
0
(0)
COBRA
Cobra TripleGrip Anchors - #8 - Plastic - 100 Per Pack - Includes 100 screws and 1/4-in Drill Bit
Format #8
Article #0484439
Model #171K
★★★★★ ★★★★★
3.9
(45)
COBRA
Cobra Walldriller+ Anchors & Screws - #8 x Pack of 8
Format #8xPK8
Article #04845801
Model #072PR
★★★★★ ★★★★★
0
(0)
COBRA
Cobra DrillerToggle Drywall Anchor - 1/4-in Dia x 3 L - 4 Per Pack - Bolts Included
Format 1/4"x3"xPK/4
Article #0484398
Model #367R
★★★★★ ★★★★★
2.6
(15)
COBRA
Cobra DrillerToggle Drywall Anchor - 1/8-in Dia x 2 L - 6 Per Pack - Bolts Included
Format 1/8"x2"xPK/6
Article #0484397
Model #360R
★★★★★ ★★★★★
1
(1)

what is the weight load for these anchors.

Asked by: carl8601
They range from approx 30 pounds to 80 pounds, depending on the thickness of the drywall and upon the thickness of the screw/bolt that comes with the anchor. There is a chart on the packaging. I used the thicker screw version to install two floating shelves (ten inch deep shelves, rated for 20 pounds load) using 2 anchors per shelf in a location where there were no studs (newer house with studs 24 inches on centre) and the shelves feel feel strong once installed due to the toggle bar part of the anchor that remains behind the wall.This anchor is basically a combination of a metal toggle bolt plus a plastic socket that fills the hole plus a plastic strap to pull the toggle bar tight. The advantages of these anchors compared to old style metal toggle bolts are: Smaller hole (1/2 inch) since the toggle bar is solid metal and it folds in one piece to get it through the hole, stronger since the toggle bar is one solid piece, the plastic socket completely fills the hole. You install the toggle and socket first, by pushing then through/into the hole, then pull the toggle bar tight behind the wall using the strap, then cut the excess strap length with a utility knife, and then you attach what you want using the included anchor bolt. The u-shaped strap is grooved to guide the anchor bolt into the metal receiving socket in the toggle bar while you screw in the bolt.. TIPS: Install the anchor in the correct orientation so that the u-shaped trough in the strap points upward. Using a large drill bit such as half an inch (as per directions) makes the job go faster.
Answered by: Paul526
Date published: 2019-08-07

Do they come with bolts

Asked by: Sassieknightz
  • y_2021, m_9, d_24, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_CA, sid_04845652, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Cobra FlipToggle Bolt Anchors - 3/16-in Dia x 2 1/2-in L - Plastic - 10 Per Pack is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from strong, easier to install than old style toggles The 3/16 size is very strong, i.e. rated up to 80 pounds, depending upon the thickness of the drywall. I installed 2 decorative floating shelves (10" deep, rated 20 pounds load) using 2 anchors per shelf since no studs were available in that location. These anchors (even in multipack) are not cheap but the peace of mind is worth it. These are better than the old style metal toggle bolts since they include a plastic socket that completely fills the hole, and a u-shaped strap to tighten the toggle bar behind the wall before you insert the screw/bolt. The u-shaped strap guides the metal bolt into the receiving socket in the metal toggle bar, as long as you orient the u-shaped strap upwards as shown in the directions.You cut off the excess length of strap after tightening the strap. Tip: If you use a 1/2 inch drill bit (as per the instructions), then drilling the hole will be easier. I also drilled a smaller pilot hole first in order to ensure exact placement of the holes..
Date published: 2018-04-18
Rated 5 out of 5 by from Rock Solid I bought this package to mount the TV after the anchors that came with the wall mount failed. These things held solid! Great weight rating for one let alone 4 of them. I've also used them for large mirrors and it's not going anywhere.
Date published: 2018-09-21
Rated 5 out of 5 by from Awesome The best anchor I have ever used for drywall. Used them for towel bars, paper holders, and robe hooks. If the required holes for the device are too close to each other, just install on an angle.
Date published: 2019-02-17
  • y_2021, m_9, d_24, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_CA, sid_04845652, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store