Stain wood furniture in one coat

Changing the look of a piece of wood furniture has never been simpler. Three steps and a couple hours is all it takes.

Difficulty level : 
Duration : 
6 hours

Prepare the surface

  • 1.1Sand the surface to be stained.
  • 1.2Clean the surface to remove any dust or debris.

Pro Tip

The higher the grain number, the finer the sandpaper.

Stain the surface

  • 2.1Mix the stain well.
  • 2.2Apply the stain with a cloth and spread evenly, following the wood grain.
  • 2.3Wait 2-3 minutes before removing the excess stain with the cloth.
  • 2.4Let dry at least one hour.
  • 2.5Clean the surface again.

Pro Tip

Test the colour and finish on a spot that doesn’t show.

Varnish the surface

  • 3.1Mix the varnish well, without shaking the container.
  • 3.2Apply the varnish with a brush in long, even strokes.

Suggested products

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store