Halloween DecorInflatable DecorationsLighting and Special EffectsIndoor DecorationsOutdoor Decorations

Pneumatic Stripe Brad Nailer - 5/8"-2"

Article#37815180 Model#NT50AE2M Format5/8-2"x18GA
Pneumatic Stripe Brad Nailer - 5/8"-2"
 

Description

With its selective actuation switch, this Metabo HPT pneumatic brad nailer lets you change from sequential to contact nailing to suit your project. The nailer accommodates nails from 5/8" to 2" and lets you adjust the depth without tools. The nose is fitted with a no-mar tip to protect the work surface from undesired scratches. The rear-load magazine makes reloading stripes hassle-free, and the nose design ensures tool-less removal of nails.

You may also like

MAKITA
Framing Nailer - 2" to 3 1/2" Clipped Head Nails - 34°
Format 2-3 1/2"
Article #11975378
Model #AN943
★★★★★ ★★★★★
1
(1)
SENCO
Pneumatic framing nailer
Format 2-3 1/2"
Article #10595003
Model #540104N
★★★★★ ★★★★★
0
(0)
SENCO
Pneumatic Framing Nailer 325XP
Format 34DGx2-3 1/4"
Article #10595004
Model #4Z0101N
★★★★★ ★★★★★
4
(5)
SENCO
Pneumatic Stapler
Format 16-17GA
Article #10595002
Model #7B0001N
★★★★★ ★★★★★
0
(0)
MAKITA
Finishing Stapler - 1" to 2" - Crown Staples - 16-Gauge
Format 1-2"x16GA
Article #11975380
Model #AT2550A
★★★★★ ★★★★★
0
(0)
HITACHI
Pneumatic Roofing Nailer - 7/8" - 1 3/4"
Format 7/8-1 3/4"x16DG
Article #37815109
Model #NV45AB2
★★★★★ ★★★★★
4.8
(4)
PASLODE
Nailer - Framing Coil Nailer
Format 2-3 1/4"x30DG
Article #2293057
Model #501000
★★★★★ ★★★★★
4.4
(20)
METABO HPT
Pneumatic Coil Roofing Nailer - 7/8"-1 3/4" - 16°
Format 7/8-1 3/4"x16DG
Article #37815178
Model #NV45AB2M
★★★★★ ★★★★★
4.8
(64)
HITACHI
Pneumatic Framing Nailer - 34° - 3 1/2"
Format 2-3 1/2"x34DG
Article #37815110
Model #NR90ADS1
★★★★★ ★★★★★
3.7
(3)
HITACHI
1/2 to 1-1/2 in Pneumatic Finishing Stapler
Format 1/2-1 1/2"
Article #37815105
Model #N3804AB3
★★★★★ ★★★★★
4.6
(81)
CRISP-AIR
Crisp-Air 90/40 Narrow Crown Stapler - 18 Gauge
Article #330674917
Model #CR9040
★★★★★ ★★★★★
0
(0)
HITACHI
2-in. Pneumatic Finishing Nailer
Format 2"x18GA
Article #37815026
Model #NT50AE2
★★★★★ ★★★★★
4.6
(202)
METABO HPT
Cordless Brad Nailer - 18-Gauge - 18 V Lithium-Ion
Format 5/8-2"x18GAx18V
Article #37815171
Model #NT1850DEM
★★★★★ ★★★★★
4.4
(42)
PASLODE
Finishing Nailer
Format 5/8 TO 2"x18GA
Article #2293071
Model #901000
★★★★★ ★★★★★
0
(0)
CARPENTER AIR TOOLS
Carpenter Framing Nailer - 21° - Full Round Head Nails
Article #330624719
Model #CFRN9021
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
2-in-1 Pneumatic Nailer/Stapler - 2"
Format 18GA
Article #73455190
Model #SB504099AV
★★★★★ ★★★★★
1
(1)

Technical specifications

Style :Pneumatic Weight :2.2 lb (1 kg) Packaging :Per unit Included :Safety glasses, carrying case Fastener Length :5/8" to 2" (1.59 cm to 5.08 cm) Type :Finishing nailer Component :Aluminum Color :Black and silver Height :9 3/16" (23.34 cm) Length :10" (25.4 cm) Gauge :Nail gauge: 18 Magazine Capacity :100 nails Depth Setting :Tool-less adjustment Pressure :70-120 PSI Fastener Type :Brad nails
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Pneumatic Stripe Brad Nailer - 5/8"-2" is rated 4.5 out of 5 by 287.
Rated 5 out of 5 by from Great nailer for the price This is the first air nailer I've ever purchased and I am quite pleased with performance so far. The tool is lightweight and very easy to handle for my little hobby projects I build. I've only ran one package of brads thru it so far but its performed flawlessly and not a single jam or double feed yet. Have no problem with air leaks around trigger either. I do have air/water separator incorporated into my air line to extend life and oil nailer before each use which also helps. I've heard Hitachi was a good brand and I'm finding that to be true. Very happy with this purchase and sure beats having to always reach for the hammer. Real time saver!
Date published: 2013-08-29
Rated 5 out of 5 by from Why did I wait so long? My first pneumatic nailer. Why did I wait so long? I nearly avoided this one because of reviews that it was loud. Meadow muffins. It scared the dog but didn't seem to bother me or my wife. Good nailer at a great price. Used several sticks of nails (Bostich) without a single jam or misfire. Would have been nice if it was angled (for crown molding) but for less than $60 that would be asking a lot. Perfect for a homeowner. Don't forget to buy the little bottle of oil (Bostich). My only suggestion would be to redesign the case so that it easily holds an oil bottle and box or two of brads. But that's nit-picking. Uses hardly any air so any compressor capable of 70 psi should work. Highly recommended.
Date published: 2011-02-05
Rated 3 out of 5 by from Very disappointed in this one I have a Hitachi 16ga 2 1/2" finish nailer but needed a smaller gun to replace an old HF brad nailer. I expected this to work as well as my other Hitachi but it hasn't. It will fire out about 2 nails, then nothing. Lots of indents in my wood but no nails. I have to open the slide then reposition the nails and close it back. 2 more nails, then repeat. I am using Hitachi nails in a Hitachi gun so that shouldn't be the problem. I'm going to stick with it for a couple more days but I think this may be going back to the store. I wish I had read all the reviews before purchasing but I was drawn in by the low price and past performance of my other Hitachi nailer.
Date published: 2014-12-05
Rated 3 out of 5 by from good nail gun except the magazine I use my tools everyday ( cabinet installation and finish carpenter), so I need tools that wont slow me down by stopping to adjust or fix a jammed tool. My experience with the Hatatchi 2" 18Gauge nail is this: the nail gun works great but the magazine ( made of plastic needs to be refined, it has too much play in where the spring loaded mechanism tends to not stay behind the nais and slide up besides the nails wich in effect stops the nails to be advancing into place so the next nail can be shot. this results in stopping and opening the nail gun and resetting the magazine only to get about 5 or 6 more shots before it happens again.. I took the gun back to Lowes ( bought the replacement gaurentee) they replaced with no problem only to experience the same problem with the new nail gun..
Date published: 2013-09-28
Rated 3 out of 5 by from its an ok nailer I purchased this product to hang trim in my kitchen and it worked well. I would say after about a box of brads(500) it started to jam and eventually a jammed nail shattered the sliding nail door and I had to return it. Im not saying its a bad nailer because it did exactly what I wanted it to do, but the plastic sliding nail door is to be desired. They could have engineered that better, maybe with a metal lining on the inside or something to keep nails from shooting out and shattering the door.
Date published: 2011-03-28
Rated 5 out of 5 by from Never fails I guess this product is hit and miss, because mine has never failed. I've used it for numerous projects (10 or so) without a jam. These include moulding, base and crown, furniture, and such. I would definitely recommend this to someone, no doubt.
Date published: 2011-01-14
Rated 1 out of 5 by from Jamb issues!!!! I bought this gun to work on my new house and have driven thousands of nails with it. Only issue I have is that if you bump it. I mean ever so slightly; it will jamb. The nails in the magazine slide under the pusher and it takes a HAMMER to get the magazine open to release the nails. As soon as this house is done, it will be disposed of properly. I'm tired of babysitting this tool. Anybody got any ideas on how to fix this thing short of using it for target practice?
Date published: 2012-11-30
Rated 5 out of 5 by from Excellent Nailer This is an excellent nailer for the price. It comes with a very nice case for storage. I have used it for various trim jobs and so far no mis-fires. It would to be nice if there was more room in the case for nail storage, but really not a big deal.
Date published: 2011-01-06
  • y_2019, m_10, d_27, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_287
  • loc_en_CA, sid_37815180, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Frequently bought together

PASLODE
Finishing Nails - Strip - 18GA - 1 3/4" - 1000/Box
Format 1 3/4"xBX/1000
Article #2293115
Model #118134
★★★★★ ★★★★★
0
(0)
DEGIL SAFETY
Safety Flex Goggle
Article #8657090
Model #7052000
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
17-Accessory Set
Format 17PC
Article #7345027
Model #MP284701AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
"Quiet Series" Electric Air Compressor - 8 Gal. - 1.0 HP
Format 8GAx1HP
Article #73455217
Model #DC080500
★★★★★ ★★★★★
5
(1)
CAMPBELL HAUSFELD
Pistol Grip Blow Gun
Article #7345042
Model #MP514300AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Ball Foot Chuck - 1/4" Female NPT
Format 1/4"
Article #73455205
Model #MP323300AV
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Coupler and Plug Set
Format 4PC
Article #7345028
Model #MP211900AV
★★★★★ ★★★★★
0
(0)
PASLODE
Finishing Nails Set - Strip - 18GA - 2000/Box
Format 18GAxBX2000
Article #2293101
Model #118000
★★★★★ ★★★★★
5
(1)
PASLODE
Finishing Nails - Strip - 18GA - 3/4" - 1000/Box
Format 3/4"xBX/1000
Article #2293111
Model #118034
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
20-Piece Air Compressor Accessory Kit
Format 20PC
Article #73455233
Model #MP604103AV
★★★★★ ★★★★★
0
(0)
PASLODE
Finishing Nails - Strip - 18GA - 2" - 1000/Box
Format 2"xBX/1000
Article #2293116
Model #118002
★★★★★ ★★★★★
0
(0)
RCR
"Contractor" Air Hose
Format 3/8"x50'
Article #0412763
Model #HAC3850
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Vertical Compressor - 80 Gal. - 5 HP
Format 80GAx5HP
Article #73455239
Model #XC802100
★★★★★ ★★★★★
0
(0)
PASLODE
Finishing Nails - Strip - 18GA - 1" - 1000/Box
Format 1"xBX/1000
Article #2293112
Model #118001
★★★★★ ★★★★★
0
(0)
CAMPBELL HAUSFELD
Tire Inflator with Gauge
Format 10-100LB
Article #73455195
Model #MP600000AV
★★★★★ ★★★★★
1
(1)
CAMPBELL HAUSFELD
Vertical Air Compressor - 60-Gallon - 3.7 HP
Format 60GAx3.7HP
Article #73455238
Model #XC602100
★★★★★ ★★★★★
0
(0)
PASLODE
Finishing Nails - Strip - 18GA - 1 1/4" - 1000/Box
Format 1 1/4"xBX/1000
Article #2293113
Model #118114
★★★★★ ★★★★★
0
(0)
DEGIL SAFETY
Safety glasses
Article #86575158
Model #7050500
★★★★★ ★★★★★
0
(0)
PASLODE
Finishing Nails - Strip - 18GA - 1 1/2" - 1000/Box
Format 1 1/2"xBX/1000
Article #2293114
Model #118112
★★★★★ ★★★★★
0
(0)
RCR
"Contractor" Air Hose
Format 3/8"x25'
Article #0412762
Model #HAC3825
★★★★★ ★★★★★
0
(0)

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store