Hole Saw Arbor - 3/8" - Carbon Steel

Article#00276995 Model#2063303 Format3/8"
Hole Saw Arbor - 3/8" - Carbon Steel
 

Description

This hole saw arbor is made from hardened carbon steel, which offers added strength and durability for regular tasks. Split point pilot drill allows faster penetration and greatly reduces "walking" on material. It thus prevents the thread from being stripped, cutting pins instead. No additional tools are needed, since it prevents the hole saw from locking on the arbor.
Finally, the quick change design makes it easy to engage/disengage the hole saw when needed.

Technical specifications

Diameter :3/8" (9.53 mm) Component :Carbon steel Utilization :Fits hole saws 1 1/4" to 6" in diameter Type :Hole saw arbor Packaging :Each

You may also like

BOSCH
Standard Medium Hole Saw Mandrel - 3/8"
Format 9/16"
Article #19835695
Model #HSBAM
★★★★★ ★★★★★
0
(0)
BOSCH
4 1/8-in Hole Saw
Format 4 1/8"
Article #19835326
Model #HB412
★★★★★ ★★★★★
0
(0)
BOSCH
Standard Large Two-Pin Mandrel - 3/8"
Format 1 1/4x6"
Article #19835696
Model #HSBAMP
★★★★★ ★★★★★
0
(0)
BOSCH
3 3/8-in Hole Saw
Format 3 3/8"
Article #19835320
Model #HB338
★★★★★ ★★★★★
0
(0)
BOSCH
3-in Hole Saw
Format 3"
Article #19835317
Model #HB300
★★★★★ ★★★★★
0
(0)
BOSCH
2 1/2-in Hole Saw
Format 2 1/2"
Article #19835315
Model #HB250
★★★★★ ★★★★★
0
(0)
BOSCH
4-in Hole Saw
Format 4"
Article #19835325
Model #HB400
★★★★★ ★★★★★
0
(0)
BOSCH
2 1/8-in Hole Saw
Format 2 1/8"
Article #19835312
Model #HB212
★★★★★ ★★★★★
0
(0)
BOSCH
2 3/4-in Hole Saw
Format 2 3/4"
Article #19835316
Model #HB275
★★★★★ ★★★★★
0
(0)
BOSCH
2 3/8-in Hole Saw
Format 2 3/8"
Article #19835314
Model #HB236
★★★★★ ★★★★★
0
(0)
BOSCH
3 1/2-in Hole Saw
Format 3 1/2"
Article #19835321
Model #HB350
★★★★★ ★★★★★
0
(0)
BOSCH
3 5/8-in Hole Saw
Format 3 5/8"
Article #19835322
Model #HB363
★★★★★ ★★★★★
0
(0)
BOSCH
4 1/2-in Hole Saw
Format 4 1/2"
Article #19835328
Model #HB450
★★★★★ ★★★★★
0
(0)
BOSCH
2 1/4-in Hole Saw
Format 2 1/4"
Article #19835313
Model #HB225
★★★★★ ★★★★★
0
(0)
BOSCH
3 3/4-in Hole Saw
Format 3 3/4"
Article #19835323
Model #HB375
★★★★★ ★★★★★
0
(0)
BOSCH
3 7/8-in Hole Saw
Format 3 7/8"
Article #19835324
Model #HB387
★★★★★ ★★★★★
0
(0)
BOSCH
1 1/4-in Hole Saw
Format 1 1/4"
Article #19835305
Model #HB125
★★★★★ ★★★★★
0
(0)
BOSCH
1-in Hole Saw
Format 1"
Article #19835303
Model #HB100
★★★★★ ★★★★★
0
(0)
BOSCH
3 1/4-in Hole Saw
Format 3 1/4"
Article #19835319
Model #HB325
★★★★★ ★★★★★
0
(0)
BOSCH
CHUCK & ADAPTORS
Format 3/8"x3PC
Article #19835391
Model #PCM38AN
★★★★★ ★★★★★
0
(0)
BOSCH
Hole Saw Pilot Bit
Format 3 3/8"
Article #19835334
Model #HB85PB
★★★★★ ★★★★★
0
(0)
BOSCH
5-in Hole Saw
Format 5"
Article #19835329
Model #HB500
★★★★★ ★★★★★
0
(0)
BOSCH
6-in Hole Saw
Format 6"
Article #19835330
Model #HB600
★★★★★ ★★★★★
0
(0)
BOSCH
1 1/8-in Hole Saw
Format 1 1/8"
Article #19835304
Model #HB112
★★★★★ ★★★★★
0
(0)
BOSCH
1 7/8-in Hole Saw
Format 1 7/8"
Article #19835310
Model #HB187
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Hole Saw Arbor - 3/8" - Carbon Steel is rated 4.1 out of 5 by 14.
Rated 1 out of 5 by from Not the quality I'd expect from a Craftsman tool The locking mechanism slides back and forth and locks into place by pushing a spring loaded ballbearing into a grove on the arbor shaft; sort of how a socket wrench locks onto a socket. Unless you have a hole saw attached to the arbor, there's nothing preventing that locking mechanism from being pulled too far forward. Nor is there anything holding that ballbearing in place. I accidentally pulled the locking mechanism off the arbor shaft and the ballbearing shot across the room and the spring bounced to the floor. The tool worked great for one use, but now the spring and ballbearing are lost and the arbor is rendered useless. I bought the Craftsman Quick Change Arbor because it looked like it was made better that the Lenox. What a disappointment. [This review was collected as part of a promotion.]
Date published: 2019-07-11
Rated 4 out of 5 by from Takes a bit to figure out how to use, but useful This CRAFTSMAN tool is part of a multi-part tool set of hole saws. To use you need both an arbor, and the hole saw of the size or sizes needed. When I first opened the package for the arbor, there is no instruction on how to use. A small diagram or description would be helpful. After looking it over for a time, I figured out the "Quick Change" design. No tools are needed, and don't be tempted to unscrew any part!! To attach the arbor to the hole saw, grasp the knurled wheel, and pull it toward the back of the shaft (where it connects to the drill/driver). It should slide back fairly easily. The attach the hole saw on the threaded portion of the shaft near the drill bit end. You will then align the appropriate holes in the hole saw with the pins extending from the knurled wheel, and push the pins into the hole saw alignment holes. Once connected together, the pieces work as a standard hole saw. [This review was collected as part of a promotion.]
Date published: 2018-10-10
Rated 1 out of 5 by from Do not buy It does not have any instruction on package. I tried to put it on the craftsman hole saw. Once I loosened one of lock screw, everything falls apart.
Date published: 2020-05-16
Rated 5 out of 5 by from Best you can buy This is the second one I’ve bought. The last one I got was 6 years ago. That’s how long it lasted. And only had to replace because I left it out side. Absolutely the best you can buy! [This review was collected as part of a promotion.]
Date published: 2019-08-15
Rated 5 out of 5 by from Did it’s job... I used this along with the bi-metal 2” hole saw to bore some 2” holes in plastic speaker pods on a Harley Touring bike. Worked beautifully cutting a precise hole. [This review was collected as part of a promotion.]
Date published: 2019-07-14
Rated 5 out of 5 by from Hole Saw Arbor I needed this for a specific project I was working on. It was perfect for the job. Quality was excellent! [This review was collected as part of a promotion.]
Date published: 2019-10-31
Rated 5 out of 5 by from Worked as expected Could not locate my old arbor, so I bought this one. As stated, worked as I expected it to! [This review was collected as part of a promotion.]
Date published: 2019-10-21
Rated 5 out of 5 by from Craftsman Arbor Fits great and easy to change with different size hole saws and locks them in place also [This review was collected as part of a promotion.]
Date published: 2019-04-18
  • y_2020, m_10, d_25, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_CA, sid_00276995, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store