"J" Bend - 1 1/2" - White

Article#12365868 Model#10400QLK Format1 1/2"
"J" Bend - 1 1/2" - White
 

Description

This "J" bend is great for hard to reach or confined areas under the sink. It is intended for use with drainage. This product features a fast and easy installation; no need to use conventional slip nuts or washers. The tube comes with an easy to use installation tool. Not for use with brass tubing.

You may also like

PLUMBPAK
Slip Joint Nut and Washer - 1 1/2" - Brass - Chrome
Format 1 1/2"
Article #1236392
Model #BP25511
★★★★★ ★★★★★
0
(0)
PLUMBPAK
Slip Joint Nut with Washer - 1 1/2" X 1 1/4" - Chrome
Format 1 1/2x1 1/4"
Article #1236393
Model #BP25510
★★★★★ ★★★★★
0
(0)
INSTA-PLUMB
Sink Extension Tube - 12" x 1 1/2"
Article #12365860
Model #40-12QLK
★★★★★ ★★★★★
4.8
(25)
PLUMBPAK
Rubber Washers - 1 1/4" - Grey - 2/Pk
Format 1 1/4"x2/PK
Article #1236394
Model #BP25516
★★★★★ ★★★★★
0
(0)
MASTER PLUMBER
Flush Valve Seal - Red
Article #6784524
Model #230A
★★★★★ ★★★★★
0
(0)
AMERICAN IMAGINATIONS
Sink Drain - 2.6" - Brass - Gold
Article #330610205
Model #AI-20328
★★★★★ ★★★★★
3
(4)
PLUMBPAK
Rubber Washers - 1 1/2" - Grey - 2/Pk
Format 1 1/2"x2/PK
Article #1236395
Model #BP25517
★★★★★ ★★★★★
0
(0)
PLUMBPAK
1-Piece Lavatory P.O. Plug - 1 1/4" X 5" - Plastic - Grey
Format 1 1/4x5"
Article #1236747
Model #B75SSABS
★★★★★ ★★★★★
0
(0)
MASTER PLUMBER
Waste and Overflow Plate Bar - Emco - White
Article #6784469
Model #.198C
★★★★★ ★★★★★
0
(0)
AMERICAN IMAGINATIONS
Sink Drain - Brass - Nickel
Article #330610206
Model #AI-20324
★★★★★ ★★★★★
3
(4)
MASTER PLUMBER
Snap-In Aerator Fitting for Dishwasher
Article #6784428
Model #411
★★★★★ ★★★★★
0
(0)
PLUMBPAK
P-Trap - Brass - 1 1/2"
Format 1 1/2"
Article #12365530
Model #BP10132
★★★★★ ★★★★★
0
(0)
AMERICAN IMAGINATIONS
Sink Drain - 2.6" - Brass - White
Article #330610211
Model #AI-20319
★★★★★ ★★★★★
3
(4)
AQUA-DYNAMIC
Lavatory Po-Plug
Format 1 1/4x6"
Article #0173048
Model #3206-201
★★★★★ ★★★★★
0
(0)
LUXO MARBRE
Lavatory Basin Outlet
Format 12x7x3"
Article #6559095
Model #DRAIN1S
★★★★★ ★★★★★
0
(0)
MASTER PLUMBER
Bevelled Overflow and Waste Gasket - Black
Article #6784253
Model #.199C
★★★★★ ★★★★★
0
(0)

Technical specifications

Component :Polypropylene Type :"J" Bend Color :White Size :1 1/2" (3.8 cm) Included :Installation tool Interior/Exterior :Indoor Quantity per Pack :1
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
"J" Bend - 1 1/2" - White is rated 4.8 out of 5 by 27.
Rated 5 out of 5 by from Plumbing just got easier I have a bathtub that has a drain that is almost impossible to reach and it needs replacing. I was really putting it off because I would have to tear out part of the ceiling in the basement to get to it. This J bend changed that. I was able to, by feel, take out the old extension and simply push the new one into place. I played with it for a while and it is very easy to use. Just push it in and it is connected. It is also made of a thick plastic that should last longer than I will. I will use this again if I need to change sinks or tub drains. [This review was collected as part of a promotion.]
Date published: 2018-12-07
Rated 4 out of 5 by from installs without tools the j-bend is designed to be installed without tools. The upper joint is a push and click joint. The part also comes with a plastic tool to release the joint when/if the need arises. The instructions are well written and easy to understand. The part works well as designed and is easy to install IF the directions are followed. It is designed for drains ONLY as it is not rated for water pressure. As it has been recently installed long term quality is unknown. [This review was collected as part of a promotion.]
Date published: 2018-12-09
Rated 5 out of 5 by from Quality Product I’ve used plastic drain fittings before, and wasn’t really a fan, but the fittings from Keeney are a much higher quality. The plastic is a thicker gauge making them more solid. I also liked the easy install feature. A big plus is the removal tool is included so if you make a mistake in your alignment and need to remove, there is no need to return to the store and buy the tool. I used both the J bend and a 12” extension tube and had no issues with either. [This review was collected as part of a promotion.]
Date published: 2018-12-07
Rated 5 out of 5 by from Solid, easy install Normally I just use the cheap oatey sink traps but I might use this in the future, its really solid and seems more fool proof. And it disconnects easily. [This review was collected as part of a promotion.]
Date published: 2018-12-04
Rated 5 out of 5 by from Plumbing made simple Plumbing made simple Press fit a watertight connection without glues and primers. Do a quick plumbing trap repair, for home plumbers this problem comes up years after the stored primer and glue have dried up! I was sent two items from Keeney that has about a 12 undersink fittings one 12 inch extension tube and one J tube(trap). Checking the J fitting against the original showed it was about the same dimensions J pipe still has the standard threaded fitting at the output. Standard thin wall pipe with a very smooth finish, part of the sealing depends on square cut end and no scraches on the pipe. O-ring and ss should work if put together carefully, no sharp edges or corrosive maintenance chemicals used. Keeney includes a tool for fast disassembly, can't do that using a glued fitting, it's separation depends on releasing the stainless steel spring that holds the seal. They have a good video on cutting and assembly at https://www.keeneymfg.com/installation_videos/40-Insta-Plumb Measure-cut-push in then hand tighten threaded joints and job is finished. [This review was collected as part of a promotion.]
Date published: 2018-12-07
Rated 4 out of 5 by from SHARKBITE style drain trap - surprise! When I got this I thought I was getting a "regular" trap. This co put the HIGHTECH push-style fitting on the top. Therefore, all you have to do is push this baby over the 1 1/2 drain pipe that comes down from a sink. I am all for trying to simplify. However, to remove, you have to keep a "C" clip handy to remove this fitting. I would have given it FIVE STARS if a "release" ring would have been built in. [This review was collected as part of a promotion.]
Date published: 2018-12-17
Rated 5 out of 5 by from Gread product for quick repairs This extension is made in China, but seems to be of good quality. The "bite" tangs that lock pieces together are solid, and the o-ring seems to provide a positive seal. No tools are required for assembly. There is an included "C" clip of sorts can be used to release the pieces after assembly if desired. Overall this seems well made and offers a simple and quick solution to making plumbing repairs. [This review was collected as part of a promotion.]
Date published: 2019-01-11
Rated 5 out of 5 by from 1 1/2 inch insta plumb J bend Very simple to use. Cut connection to length, slide fitting into place. No adhesive needed as advertised. Removal tool allows easy disconnection or rotation to line up connections. No leaking around joint so far. Plastic fittings can be cleaned and reused since no adhesive is used, saving time and money in the long run. Website videos useful to see how different kinds of connections work. [This review was collected as part of a promotion.]
Date published: 2019-01-05
  • y_2019, m_8, d_16, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_CA, sid_12365868, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 2ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store