Need a new garage door? Garaga garage doors are made here and designed for our harsh winters. Don’t wait any longer, try the Garaga door design tool.
Start your project 
From start to finish, RONA is with you every step of the way. First, submit your information by using our interactive tool or by filling out our online form. We’ll connect you to work virtually or in person with a Garaga specialist, with whom you will confirm the door style, materials, colours, and service options.
Once the project is approved, it will take between 4 to 8 weeks to manufacture your garage door. At this stage, no cancellation is possible.
The installer will then contact you to schedule the removal of your old door and the installation of your new Garaga garage door. Please note that the installation service does not include any structural modification, removal or reinstallation of safety equipment or electrical wiring. As a final step, the installer will clean the job site and will leave with your old garage door.
The appearance of your garage door is more important than you might think. Indeed, it can represent almost 40% of the facade of your home - which is why we make your selection process easier with our interactive Garaga garage door tool. This tool allows you to select the style, colours, and embellishments and apply the design to your home to make your buying process a hassle-free experience.
Discover the optionsHow to calculate the square footage:
Step 1: Measure the existing door opening’s width (A) and height (B) in feet and inches. This determines the size of door needed. Never base your measurements on the size of the existing door but on the door’s opening instead.
Step 2: Measure for sideroom, left side (C) and right side (D).
• 6 inches is required on each side for installation of vertical tracks.
• Make sure no entry door will interfere with the horizontal tracks and the door.
Step 3: Measure area labeled “headroom” (E). Distance between the top of the door opening and the ceiling (or floor joists):
• 8 ½” is required for standard extension spring.
• 12” is required for standard torsion spring.
• Add 2" more for electric opener.
• If you have restricted headroom, special hardware is available.
Note: If door height extends above the opening, the headroom measurement should be taken from the top of the top panel to the ceiling.
Step 4: Measure area labeled “backroom” (F). Distance is measured from the garage door opening toward the back wall of the garage.
• Door height plus 24” is required.
• Additional backroom (door height + 48") may be required for installation of an automatic garage door opener.
• Make sure no lighting or other material will interfere with the door sections when moving.
Select the style, colours and ornaments, then apply the design to your home to visualize your project.
Start your projectNo worries! Fill out a consultation request and we will contact you within 72 hours.
First consultation
Once you have approved the door details and made the payment, a local, licensed and insured Garaga installer will schedule a home appointment for measurements.
Second consultation
The installer may need to come back to confirm certain measurements or details.
That means:
• Clearly display your renovation permit
• You must remove any object from the work area before the installer arrives
• You must disconnect your garage door opener (if applicable)
• A clear path should be made to the space receiving installation
• Floors should be protected to avoid potential damage*
The installer will call ahead of time to confirm his estimated time of arrival and review safety steps with you.
All installers are required to pass a daily health screening, they must wear personal protective equipment, and sanitize work area and tools on each job.
Likewise, we require customers to practice social distancing at all times while installers are performing their job.
All installers are background checked, licensed where applicable and insured.
In order to be a part of our Independent Installer program, all contractors must go through the toughest rating test of all – your satisfaction.
After your project is completed, we will send you a survey email to assess your satisfaction. Make sure to add RONA to your trusted senders’ list.
And don’t forget! We offer a 1-year labour warranty on all installation services and we provide assistance 7 days a week through our call centre at 1-844-454-1454.
Who doesn’t like pulling up a smoothly gliding garage door? Start your project now to get rid of that creaky garage door for good.
From start to finish, RONA is with you every step of the way. First, submit your information by filling out our online form. We’ll connect you to work virtually or in person with a specialist, with whom you will confirm the door style, materials, colours, and service options. Once the project is approved, it will take between 4 to 8 weeks to manufacture your garage door. At this stage, no cancellation is possible.
The installer will then contact you to schedule the removal of your old door and the installation of your new garage door. Please note that the installation service does not include any structural modification, removal or reinstallation of safety equipment or electrical wiring. As a final step, the installer will clean the job site and will leave with your old garage door.
The appearance of your garage door is more important than you might think. Indeed, it can represent almost 40% of the facade of your home - which is why we want to make your selection process easier by allowing you to select the style, colours, and embellishments to make your buying process a hassle-free experience.
How to calculate the square footage:
Step 1: Measure the existing door opening’s width (A) and height (B) in feet and inches. This determines the size of door needed. Never base your measurements on the size of the existing door but on the door’s opening instead.
Step 2: Measure for sideroom, left side (C) and right side (D).
• 6 inches is required on each side for installation of vertical tracks.
• Make sure no entry door will interfere with the horizontal tracks and the door.
Step 3: Measure area labeled “headroom” (E). Distance between the top of the door opening and the ceiling (or floor joists):
• 8 ½” is required for standard extension spring.
• 12” is required for standard torsion spring.
• Add 2" more for electric opener.
• If you have restricted headroom, special hardware is available.
Note: If door height extends above the opening, the headroom measurement should be taken from the top of the top panel to the ceiling.
Step 4: Measure area labeled “backroom” (F). Distance is measured from the garage door opening toward the back wall of the garage.
• Door height plus 24” is required.
• Additional backroom (door height + 48") may be required for installation of an automatic garage door opener.
• Make sure no lighting or other material will interfere with the door sections when moving.
We will contact you within 72 hours to schedule an in-home consultation. It’s that simple!
Request a consultationOur specialists will help you fill out an appointment request and a qualified professional will install it for you.
Find a storeFirst consultation
Once you have approved the door details and made the payment, a local, licensed and insured installer will schedule a home appointment for measurements.
Second consultation
The installer may need to come back to confirm certain measurements or details.
That means:
• Clearly display your renovation permit
• You must remove any object from the work area before the installer arrives
• You must disconnect your garage door opener (if applicable)
• A clear path should be made to the space receiving installation
• Floors should be protected to avoid potential damage*
The installer will call ahead of time to confirm his estimated time of arrival and review safety steps with you.
All installers are required to pass a daily health screening, they must wear personal protective equipment, and sanitize work area and tools on each job.
Likewise, we require customers to practice social distancing at all times while installers are performing their job.
All installers are background checked, licensed where applicable and insured.
In order to be a part of our Independent Installer program, all contractors must go through the toughest rating test of all – your satisfaction.
After your project is completed, we will send you a survey email to assess your satisfaction. Make sure to add RONA to your trusted senders’ list.
And don’t forget! We offer a 1-year labour warranty on all installation services and we provide assistance 7 days a week through our call centre at 1-844-454-1454.
