Irrigation Systems - Orbit - 200 lb Pressure Gauge

Article#3809028 Model#91130 Format200PD
Irrigation Systems - Orbit - 200 lb Pressure Gauge
 

Description

Monitor the performance of a sprinkler or irrigation system with the help of this Orbit pressure gauge. It measures water pressure in pounds per square inch (PSI) and has an easy-to-read dial and needle, with markings going up to a maximum of 200 PSI. The 3/4" female threaded inlet connects quickly and easily, while the included hose washer makes the connection more secure. A clear plastic lens covers and protects the dial. This irrigation gauge serves as an early warning if pressure is too high or too low, and it works with a variety of watering systems.

Technical specifications

You may also like

ORBIT
Adaptor for Riser and Sprinkler Head - 1/2" to 3/4"
Format 1/2x3/4"
Article #38095346
Model #37217
★★★★★ ★★★★★
5
(1)
ORBIT
Sprinkler
Format 40-360DG
Article #38095064
Model #94215
★★★★★ ★★★★★
4.2
(6)
ORBIT
Pop-up Sprinkler
Format 4"
Article #38095276
Model #94176
★★★★★ ★★★★★
0
(0)
ORBIT
Riser Tubing - 1/2" x 3" - Plastic - Black
Format 1/2x3"
Article #38095354
Model #38083
★★★★★ ★★★★★
0
(0)
ORBIT
Sprinkler Swing Joint Elbow - 3/4"
Format 3/4"
Article #3809059
Model #37164
★★★★★ ★★★★★
5
(1)
ORBIT
Riser Tubing - 3/4" x Close - Plastic - Black
Format 3/4"
Article #38095350
Model #38096
★★★★★ ★★★★★
0
(0)
ORBIT
Riser Tubing - 1/2" x 6" - Black
Format 1/2x6"
Article #38095344
Model #37227
★★★★★ ★★★★★
5
(3)
ORBIT
Riser Tubing - 1/2" - Black
Format 1/2"
Article #38095345
Model #38381
★★★★★ ★★★★★
0
(0)
ORBIT
Riser Tubing - 3/4" x 3" - Plastic - Black
Format 3/4x3"
Article #38095356
Model #38098
★★★★★ ★★★★★
0
(0)
ORBIT
Unit Sprinkler Head
Format 25 360DG
Article #3809030
Model #94285
★★★★★ ★★★★★
5
(1)
ORBIT
Riser Tubing - 1/2" x 2" - Plastic - Black
Format 1/2x2"
Article #38095347
Model #38382
★★★★★ ★★★★★
0
(0)
ORBIT
FNTP Side Strip Shrub
Format 1/2"
Article #3809043
Model #94278
★★★★★ ★★★★★
0
(0)
ORBIT
Riser Tubing - 1/2" x 12" - Plastic - Black
Format 1/2x12"
Article #38095353
Model #38091
★★★★★ ★★★★★
0
(0)
ORBIT
"Voyager II" Sprinkler
Format 40DG-360DG
Article #3809035
Model #91561
★★★★★ ★★★★★
0
(0)
ORBIT
Cut-off Riser Extender - 1/2" x 2 1/2" - Polyethylene
Format 1/2x2 1/2"
Article #38095348
Model #37017
★★★★★ ★★★★★
4.2
(6)
WATERMASTER
Pop-up Sprinkler
Format 4"
Article #38095277
Model #94178
★★★★★ ★★★★★
0
(0)
ORBIT
Riser Tubing - 3/4" x 12" - Plastic - Black
Format 3/4x12"
Article #38095351
Model #38102
★★★★★ ★★★★★
0
(0)
ORBIT
Sprinkler Riser - 3/4" x 6"
Format 3/4x6"
Article #3809019
Model #37113
★★★★★ ★★★★★
4
(1)
ORBIT
Valve Box - 12"
Format 12"
Article #3809015
Model #53212
★★★★★ ★★★★★
0
(0)
ORBIT
BARB Adaptor
Format 1/2"
Article #3809056
Model #94345
★★★★★ ★★★★★
0
(0)
ORBIT
Sprinkler Barb Elbow - 3/4" x 1/2"
Format 3/4x1/2"
Article #3809057
Model #94360
★★★★★ ★★★★★
1
(1)
ORBIT
Valve Box - Circular - 6"
Format 6"
Article #3809062
Model #53210
★★★★★ ★★★★★
0
(0)
ORBIT
Riser Tubing - 1/2" x 24" - Plastic - Black
Format 1/2x24"
Article #38095352
Model #38095D
★★★★★ ★★★★★
3
(1)
ORBIT
Riser Tubing - 3/4" x 6" - Plastic - Black
Format 3/4x6"
Article #38095349
Model #38101
★★★★★ ★★★★★
0
(0)
ORBIT
Pop-up Sprinkler
Format 4"
Article #38095278
Model #94177
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Irrigation Systems - Orbit - 200 lb Pressure Gauge is rated 4.0 out of 5 by 86.
Rated 5 out of 5 by from Terrific water line and appliance saver If the water pressure in your house is to low or high, it can cause serious problems to your plumbing fixtures and appliances. While it’s normal for water pressure in residential homes to vary from 30 to 80 psi, an ideal range is between 45 to 60 psi. If the pressure is to low, your dishwasher, clothes washer, and other appliances may not operate properly. If the pressure is too high (about 80 psi), it could rattle and burst your water pipes, damage your hot water heater, damage hoses connected to appliances. If you’re having any of these problems, purchase the Pressure Gauge, screw it on to an outside water faucet, turn the faucet on all the way and read the pressure. If an adjustment in psi is required, it can be easily done on the water pressure regulator located by your water meter. This inexpensive device and several minutes of our time saved us hundreds, if not thousands of dollars by letting us know that our psi was too high (90 psi), causing our water pipes to rattle when we used water. It turned out that our water pressure regulator needed replacing, which we also purchased at Lowe’s.
Date published: 2011-01-26
Rated 5 out of 5 by from Does the trick. This gauge is a little more expensive than at other stores, but it is made by orbit valve. It would be easier to use if the nut that screws on the faucet was more like a water hose style. This one screws on the gauge and has teflon tape sealing it. Kind of a strange design.
Date published: 2013-07-13
Rated 5 out of 5 by from works fine For $10 if you need to know what water pressure is from a faucet this is a terrific guage. I needed info prior to installing a watering system and in a few seconds I had the answer I needed.
Date published: 2012-05-21
Rated 2 out of 5 by from Bare bones... Gage has a red 'max-/peak-level' indicator needle that isn't show in some of the pictures. The max-/peak-level needle is almost worthless as it moves quite freely (e.g. On some pressure readings it would go up AND DOWN with the pressure needle.). The faucet threading connector is only loosely attached to the pressure gage stem. While screwing the gage onto a faucet, I accidentally unscrewed it from the pressure gage. For the price, it will get the job done, but it is cheaply made - not sure how long it will last.
Date published: 2013-09-11
Rated 5 out of 5 by from works great just what I needed to set the pressure reducing valve
Date published: 2012-03-05
Rated 2 out of 5 by from Quality is poor Had to purchase a 3rd one in the past 4-months. I do home inspections, so they get used at least 12-15 times per week; however, the needle gets stuck very easily; especially with high pressure. I was semi-forced into buying this one because I was in between jobs and needed one quickly. I had sworn that I would NOT purchase another.
Date published: 2013-09-02
Rated 2 out of 5 by from 200-lb. Pressure Gauge 1. Multi part build up using Teflon tape versus a unijunction one 2. poor nozzle to gage fitting required channel lock wrench to stop slight leaking 3. Static red pointer inside gage did not operate correctly resulting in false static reading after shut off of pressure.
Date published: 2014-03-29
Rated 3 out of 5 by from Seems to work but not great quality Bought this to determine if my water pressure is too high for my polybutylene water pipes. Fortunately, it reads just about right (56PSI), although I have no independent means of verifying it's accuracy. Others have already described its cons: - Connector should rotate like a hose end, otherwise, when you screw it on, the dial may be hard to read. With me it was facing the wall in a dark corner of the garage and I had to use a mirror to read it. - The red pointer would have helped to preserve the reading when I unscrewed it, but it's so loose, it moved back to zero. Your mileage may vary...
Date published: 2014-09-23
  • y_2020, m_9, d_20, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_86
  • loc_en_CA, sid_3809028, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store