Irwin Pro-Touch Coping Saw - 6.5-in

Article #02445432 Model #2014400 Format6 1/2"
Irwin Pro-Touch Coping Saw - 6.5-in
 

Description

Irwin(R) Pro-Touch(TM) coping saw cuts through wood with a 6,5-in high-carbon steel blade and a 17-point tooth count. Flat-Bar(TM) frame and DuraSteel(TM) pins make it a viable, durable solution for DIY-ers and woodworking enthusiasts. Ergonomic triangular Pro-Touch handle provides greater comfort. Lifetime warranty against manufacturing defect.

Technical specifications

Type :Wood cutting tool Model :Pro-Touch(TM) Color :Blue and yellow Warranty :Lifetime warranty against manufacturing defect Blade :17 teeth Length :6.5-in (16.51 cm)

You may also like

OLFA
Olfa Utility L-1 Knife - Heavy-Duty Ratchet-Lock - 18 mm
Format 18MM
Article #0002030
Model #5003
★★★★★ ★★★★★
4.9
(38)
OLFA
OLFA L-Type Snap-off Blades - Carbon Steel - 3/4" - 10/Pack
Format 3/4"xCR/10
Article #0002043
Model #5009
★★★★★ ★★★★★
5
(2)
RICHARD
Snap-Off Utility Knife Set - 18 mm and 25 mm
Format 25MM
Article #02715590
Model #08822
★★★★★ ★★★★★
0
(0)
OLFA
OLFA Xtra Heavy-Duty Silver Snap-Blade - HB - 25 mm - 5/Pack
Format PK/5
Article #0002054
Model #5008
★★★★★ ★★★★★
5
(14)
OLFA
OLFA Utility Knife - Heavy-Duty Ratchet-Lock - H-1 - 1" x 10"
Format 1x10"
Article #0002050
Model #5006
★★★★★ ★★★★★
5
(42)
CRAFTSMAN
Solid Frame Hacksaw - 12'' - Red and Black
Format 12"
Article #00276747
Model #CMHT20138
★★★★★ ★★★★★
4.7
(66)
OLFA
OLFA HD Ultra-Sharp Black Snap-Blade - LBB - 18 mm - 10/Pack
Format PK10
Article #0002014
Model #9070
★★★★★ ★★★★★
4.7
(7)
OLFA
OLFA Xtra Heavy-Duty Silver Snap-Blade - HB - 25 mm - 20/Pack
Format PK/20
Article #0002022
Model #9061
★★★★★ ★★★★★
5
(1)
OLFA
OLFA Ultramax Blades - HBB - Black - 20/Pack
Format PK20
Article #00025016
Model #1082209
★★★★★ ★★★★★
5
(4)
FULLER
Fuller Drywall Saw - Steel - 6-in
Format 6"
Article #70155065
Model #320-0090
★★★★★ ★★★★★
0
(0)
OLFA
OLFA XH-1 Utility Knife - 25 mm
Format 25MM
Article #0002064
Model #1071858
★★★★★ ★★★★★
4.9
(59)
WISS
Wiss MetalMaster(R) Sheet Metal Snips - 9 3/4-In.
Format 9 3/4"
Article #0350045
Model #M3R
★★★★★ ★★★★★
4.9
(45)
RICHARD
Richard Replacement Scrapper Blades - 5/Pack
Format PK/5
Article #0271060
Model #RS-2-B
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Heavy-Duty Utility Blade - Induction Hardened - 10/PK
Format 10PK
Article #00276753
Model #CMHT11700X
★★★★★ ★★★★★
5
(2)
STANLEY
Mini hacksaw
Format 10"
Article #03055575
Model #15-809
★★★★★ ★★★★★
0
(0)
FULLER
Mitre Box with 14" Back Saw
Article #70155067
Model #320-0217
★★★★★ ★★★★★
3
(2)
OLFA
OLFA Utility Knife - PC-L - Laminate Cutting
Article #00025018
Model #1090486
★★★★★ ★★★★★
4
(3)
LENOX
Lenox Tubing Cutter for Tight Spaces - 1/2-in
Format 1/2"
Article #79915235
Model #14830TS12
★★★★★ ★★★★★
4.6
(33)
OLFA
OLFA Snap-Off Blades - Carbon Steel - 3/4" - 50/Pack
Format 3/4"xCR/50
Article #0002047
Model #5016
★★★★★ ★★★★★
5
(3)
CRAFTSMAN
Panel Saw - 15''
Format 15"
Article #00276749
Model #CMHT20880
★★★★★ ★★★★★
4.7
(87)
CRAFTSMAN
Replacement Snap-Off Utility Blade - 18 mm - 3/PK
Format 18MMx3PK
Article #00277028
Model #CMHT11301
★★★★★ ★★★★★
0
(0)
OLFA
OLFA HD Ultra-Sharp Snap-Blade - LBB - 18 mm - Black - 50/Pack
Format PK/50
Article #0002013
Model #9069
★★★★★ ★★★★★
4.8
(5)
OLFA
OLFA Heavy-Duty Slide-Lock Utility Knife - SL-1 - 18 mm
Article #0002021
Model #9038
★★★★★ ★★★★★
5
(8)
OLFA
OLFA HD Fiberglass Utility Knife with Pick - L-5 - 18 mm
Format 18MM
Article #00025030
Model #1116110
★★★★★ ★★★★★
4.9
(125)
CRAFTSMAN
Replacement Hook Blade - Large - 5/PK
Format 5PK
Article #00276637
Model #CMHT11146
★★★★★ ★★★★★
2.3
(3)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Irwin Pro-Touch Coping Saw - 6.5-in is rated 4.4 out of 5 by 88.
Rated 4 out of 5 by from Coping Saw [This review was collected as part of a promotion.] I needed this while installing wood baseboards. Needed something to cut the profile for joining baseboards on interior corners. The sawblade that comes with the saw is too coarse but once I bought the 21 tpi blade, it worked just great. Blade change is easy with the help of an open ended wrench for tightening the blade nut. Don’t tighten it too much, you’ll just break it in half. Followed the edge quite well with very little wander. It would be beneficial for the handle to be solid versus hollow. That is a personal thing. It would help to balance the saw overall.
Date published: 2019-01-26
Rated 4 out of 5 by from Good for the price This is a good tool that could be a bit better. Instructions are not provided how to change the blade. In case you need this I recommend holding the yellow pin next to the handle firmly and then turn the handle counter clockwise to loosen it up until the blade falls out easily. Put the new blade back in and turn counter clockwise (you may have to put a little pressure on the frame). Be safe and wear eye and hand protection in case the new blade breaks. The performance of the saw itself is good. I am sure there are better out there but this is good for the price. It is difficult to turn the blade when in use - again you may have to loosen the handle and then turn it. Other make/model this is easier without loosening the handle. I use this tool all the time. The replacement blades have different tooth count that makes cutting different wood easier.
Date published: 2017-10-03
Rated 5 out of 5 by from Learning to Cope With It [This review was collected as part of a promotion.] First coping saw I ever purchased/used. I would always miter crown at 45 degrees with a miter saw and hope they fit inside corners flush. That seldom ever happens, so bring on the coping saw. Takes some practice to get the cutting angle correct, and will add a little time to your project, but it cuts cleanly and makes those corners tight and look professional.
Date published: 2019-03-13
Rated 5 out of 5 by from Great, inexpensive saw Sturdy saw with full blade rotation. Unlike the Cobalt saw, it has steel (not aluminum) blade mounts.I have been using it to cut trim and it has performed perfectly with a comportable grip.
Date published: 2017-03-23
Rated 5 out of 5 by from Coping [This review was collected as part of a promotion.] This coping saw was perfect for a project I’m working on. Not finished yet but could not have gotten as far as I have without it!
Date published: 2019-04-23
Rated 5 out of 5 by from Excellent value. For the money, you can't go wrong if used as intended on small wood projects. Nice grip and ruggedly built.
Date published: 2017-04-22
Rated 4 out of 5 by from Good little saw [This review was collected as part of a promotion.] The handle feels great in your hand. The saw itself is sturdy - it didn't flex when cutting. I recommend it.
Date published: 2018-11-01
Rated 4 out of 5 by from It takes some getting use to but once you figure out the trick it is a sharp versatile saw.
Date published: 2014-01-02
  • y_2021, m_6, d_17, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_88
  • loc_en_CA, sid_02445432, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store