Joist hanger

Article#67495161 Model#JUS26-TZ Format2x6-8"x18GAxBX100
Joist hanger
 

Description

Joist Hangers. 2 in X 6 to 8 in. 100 per box. 18 gauge. Single.

You may also like

MITEK
Joist hanger
Format 2x4"x18GAxBX100
Article #67495159
Model #JUS24-TZ
★★★★★ ★★★★★
0
(0)
MITEK
Steel Double Joist Hanger 2" x 10" x 12" - Box of 50
Format 2" 10-12-14" 50/BX
Article #67495163
Model #JUS210-2TZ
★★★★★ ★★★★★
5
(1)
MITEK
Steel Double Joist Hanger 2" x 6" to 8" - Box of 50
Format 2x6-8"x18GAxBX50
Article #67495160
Model #JUS26-2TZ
★★★★★ ★★★★★
0
(0)
MITEK
Joist Hangers
Format 2x10"x20GAxBX50
Article #67495193
Model #JL210
★★★★★ ★★★★★
0
(0)
MITEK
Joist hanger
Format 2x8-10"x18GAxBX50
Article #67495162
Model #JUS28-TZ
★★★★★ ★★★★★
4
(6)
MITEK
Steel Single Joist Hanger 2" x 10" x 12" - Box of 50
Format 2x10x12x14"xBX50
Article #67495164
Model #JUS210-TZ
★★★★★ ★★★★★
4.5
(2)
MITEK
Steel Double Joist Hanger 2" x 8" to 10" - Box of 50
Format 2x8-10"x18GAxBX50
Article #67495218
Model #JUS28-2TZ
★★★★★ ★★★★★
0
(0)
MITEK
Adjustable Single Hanger
Format 2"x6"x18GA
Article #67495136
Model #LSSH15-TZ
★★★★★ ★★★★★
4.7
(23)
MITEK
Galvanized Steel Face Mount Joist Hanger 2" x 8"
Format 2"x8"
Article #67495229
Model #JL28IF-TZ
★★★★★ ★★★★★
0
(0)
MITEK
Joist Hanger
Format 2x8"x20GAxBX50
Article #67495192
Model #JL28
★★★★★ ★★★★★
0
(0)
MITEK
Joist hanger
Format 2x4"x20GAxBX50
Article #67495191
Model #JL24
★★★★★ ★★★★★
0
(0)
MITEK
Galvanized Steel Joist Hanger 2" x 6" - Box of 50
Format 2x6"x20GAxBX50
Article #67495190
Model #JL26
★★★★★ ★★★★★
0
(0)

Technical specifications

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Joist hanger is rated 4.3 out of 5 by 15.
Rated 5 out of 5 by from Please stop giving bad advice... These hangers are not intended to be screwed in or shot with a pneumatic nail gun. They are engineered to specific codes to hold weight, only if installed correctly with the correct fasteners. Screws and galvanized nails do not have the same sheering force, so they can't carry the same load. If you do install these, use the proper nails recommended by the manufacturer, and put a nail in every hole, that is what they are intended for.
Date published: 2016-12-14
Rated 5 out of 5 by from Simpson strong tie I'd like to meet the CEO of simpson strong tie so I could kiss him! Their products are fantastic and worth every penny. I wouldn't build a deck without using this product. So much better then toe nailing/toe screwing. Increases the strength of the deck significantly. I'll be putting a hot tub on the deck and I have no concerns since I'm using this product. Very easy to use. If I was the maker, I'd consider slight modifications, but just minor. I've used these with each deck I've built and will do so in the future.
Date published: 2013-07-29
Rated 5 out of 5 by from excellent product Very good joist hanger.I have used these before and they worked great.I needed some more for floor joists and they worked very good.Very pleased with results.
Date published: 2013-05-31
Rated 5 out of 5 by from Easy to use For a product that is very inexpensive, it sure makes framing a platform or deck a lot easier.
Date published: 2013-07-05
Rated 5 out of 5 by from Please stop giving bad advice giving bad advice Screws are a no-no. Pneumatic tools are okay, per manufacturer's instructions: " Pneumatic nail tools may be used to install connectors, provided the correct quantity and type of nails (length and diameter) are properly installed in the nail holes. Tools with nail hole-locating mechanisms should be used. Follow the manufacturer’s instructions and use the appropriate safety equipment. Overdriving nails may reduce allowable loads."
Date published: 2017-08-18
Rated 5 out of 5 by from Necessary for all unsupported floor joists. Suggest using 1" square drive exterior screws for attaching the hanger to vertical support(s) before driving toe-nail screws or nails. I use exterior or galvanized fasteners to eliminate potential rust stains in future years.
Date published: 2014-01-28
Rated 4 out of 5 by from Nice hanger I'm not sure what to write about this hanger. It's a joist hanger that had holes for the nails in the right spots and is galvanized so it will stand up to the outdoor environment. I expanded my porch and used them to hold the joists.
Date published: 2013-06-25
Rated 3 out of 5 by from USE NAILS! We used this product to build our deck. We used screws to install them. The building inspector came today and told us WE MUST USE NAILS PER THE MANUFACTURERS SPECIFICATIONS! There ARE NO MANUFACTURERS SPECIFICATIONS ANYWHERE!! We now have to remove all the screws and put in nails. This should be specified somewhere!! Even the reviews suggest using screws. VERY FRUSTRATED CUSTOMER!!!
Date published: 2015-08-17
  • y_2019, m_8, d_16, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_CA, sid_67495161, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store