Halloween DecorInflatable DecorationsLighting and Special EffectsIndoor DecorationsOutdoor Decorations

Joist hanger

Article#67495162 Model#JUS28-TZ Format2x8-10"x18GAxBX50
Joist hanger
 

Description

Joist Hangers. 2 in X 8 to 10 in. 50 per box. 18 gauge. Single.

You may also like

MITEK
Adjustable Single Hanger
Format 2"x6"x18GA
Article #67495136
Model #LSSH15-TZ
★★★★★ ★★★★★
4.8
(24)
MITEK
Joist Hanger
Format 2x8"x20GAxBX50
Article #67495192
Model #JL28
★★★★★ ★★★★★
0
(0)
MITEK
Galvanized Steel Joist Hanger 2" x 6" - Box of 50
Format 2x6"x20GAxBX50
Article #67495190
Model #JL26
★★★★★ ★★★★★
0
(0)
MITEK
Joist hanger
Format 2x6-8"x18GAxBX100
Article #67495161
Model #JUS26-TZ
★★★★★ ★★★★★
4.3
(15)
MITEK
Steel Double Joist Hanger 2" x 8" to 10" - Box of 50
Format 2x8-10"x18GAxBX50
Article #67495218
Model #JUS28-2TZ
★★★★★ ★★★★★
0
(0)
MITEK
Steel Single Joist Hanger 2" x 10" x 12" - Box of 50
Format 2x10x12x14"xBX50
Article #67495164
Model #JUS210-TZ
★★★★★ ★★★★★
3.3
(4)
MITEK
Joist Hangers
Format 2x10"x20GAxBX50
Article #67495193
Model #JL210
★★★★★ ★★★★★
0
(0)
MITEK
Joist hanger
Format 2x4"x20GAxBX50
Article #67495191
Model #JL24
★★★★★ ★★★★★
0
(0)
MITEK
Steel Double Joist Hanger 2" x 6" to 8" - Box of 50
Format 2x6-8"x18GAxBX50
Article #67495160
Model #JUS26-2TZ
★★★★★ ★★★★★
0
(0)
MITEK
Galvanized Steel Face Mount Joist Hanger 2" x 8"
Format 2"x8"
Article #67495229
Model #JL28IF-TZ
★★★★★ ★★★★★
0
(0)
MITEK
Steel Double Joist Hanger 2" x 10" x 12" - Box of 50
Format 2" 10-12-14" 50/BX
Article #67495163
Model #JUS210-2TZ
★★★★★ ★★★★★
5
(2)
MITEK
Joist hanger
Format 2x4"x18GAxBX100
Article #67495159
Model #JUS24-TZ
★★★★★ ★★★★★
0
(0)

Technical specifications

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Joist hanger is rated 4.0 out of 5 by 6.
Rated 4 out of 5 by from Joist hanger for hanging 2X8 floor joists Many municipalities around the Country require these hangers for any new construction projects involving joist to joist perpendicular connections. They are a good-idea to use in areas even where they are not required by Code also. These brackets hold your 2 X 8 lumber in a cradle to add additional strength to the connection point in addition to the nails used. While not an excuse to poor saw cuts, these brackets will leave a little play for boards cut slightly too short and still be able to be used with confidence that the joint will hold the rated poundage when installed with the proper sized nails. Have a short piece of scrap 2 X 8 available for ease of installation. Set the scrap 2 X 8 in the bracket and then hold both to the joist to be connected to. The scrap will allow you to see the finish height of the material and let you set your bracket with the bending tabs before nailing. Once height is where expected, removed the scrap wood and nail as normal. Do not pinch your bracket too tight closed when nailing as this will make installation harder afterward. Use all nail holes provided for proper holding strength. Brackets installed back to back on both sides of a 2 X 8 as in an intermediate joist will cause you problems with nailing if you do not offset one side left or right of the opposite side. If you do not off set you will find your second-side nails will hit your first-side brackets and bend your nails or push the opposite bracket off the board. Another alternative if not off set is to nail bracket holes on a diagonal to prevent hitting the opposite bracket. They do what they are supposed to do if installed properly and make very strong and durable joints even for beginner or week end carpenters.
Date published: 2013-08-13
Rated 1 out of 5 by from Check the item number. Item number JUS28-TZ is for 2x8 joist. Lowes has it labeled as for 2x10. JUS210-TZ is for 2x10. Lowes says it is for 2x8-10. The product is great. But Lowes website is wrong.
Date published: 2017-07-30
Rated 5 out of 5 by from Just what was needed What can be said? It does the job and easy to install.
Date published: 2013-07-07
Rated 5 out of 5 by from Product worked great Hanger worked great, all where well made easy to find in the store. Display tags could be a little more visible and easier to read.
Date published: 2013-06-28
Rated 4 out of 5 by from Excellent way to get the joist in place fast... These are great and easy to use. Screw them up, place your board in the bracket and secure with screws. It's that easy.
Date published: 2013-10-02
Rated 5 out of 5 by from This is a good product I enjoy shopping at lowes. The ladies in contractors check out are very helpful and friendly.
Date published: 2013-09-05
  • y_2019, m_9, d_29, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_CA, sid_67495162, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store