Kobalt Compact Sliding Single-Bevel Mitre Saw - Corded - 7 1/4-in - 10 A

Article #89335003 Model #SM1816LW Format7 1/4"x10AM
Kobalt Compact Sliding Single-Bevel Mitre Saw - Corded - 7 1/4-in - 10 A
 

Description

Get great cutting results with this Kobalt mitre saw, with its tool-less adjustable laser system. This Mitre saw has a 10 Amp ball-bearing motor that delivers 5000 RPM to ensure superior cutting power. The versatile cutting capacity allows a wide range of smooth easy cuts, and the large base provides sturdy work support. This Kobalt product is backed by a three-year warranty and is UL-certified.

  • Maximum crosscut up to 2-in x 8-in (nominal) at 90 degrees and 2-in x 6-in at 45, idea for molding and framing cuts
  • Lightweight (under 23 lbs) for easy transport from storage to work location
  • Miter cuts up to 50 degrees left and right with 9 positive stops at the most used degrees
  • Tool-less adjustable upfront mounted laser guide system projects accurate pre-cutting line for precise alignment
  • Powerful 10.0 Amp ball bearing motor, delivers up to 5,000 RPM for accurate cuts
  • Large, die-cast aluminum base and table for increased work support
  • Bevel cutting up to 47 degrees to the left, positive stops at 0 and 45 degrees
  • Dual slide rail system with linear bearings allows for smooth and accurate operation
  • Tall, die-cast aluminum fence gives support during setup and cutting

Technical specifications

Amperage(Amps) :10 Arbor Diameter :5/8-in Base Warranty Labor(Months) :36 Base Warranty Parts(Months) :36 Battery Included :No Battery Voltage :N/A Battery Warranty Labor(Months) :0 Battery Warranty Parts(Months) :0 Bevel :Single Bevel Capacity(deg) :45 Blade Included :Yes Charger Included :No Compound :Yes Cord Length (cm) :182.88 Cord Length (ft) :6 Cordless :No Depth of Cut at 45 Degrees(cm) :3.81 Depth Of Cut At 45 Degrees (in) :1.5 Depth of Cut at 45 Degrees(mm) :38.1 Depth of Cut at 90 Degrees(cm) :5.08 Depth Of Cut At 90 Degrees (in) :2 Depth of Cut at 90 Degrees(mm) :50.8 Dust Handling :Port Electric Brake :Yes File/Certification Number :N/A Folding :No Height (cm) :46.99 Height (in) :18.5 Height (mm) :469.9 Item Disclaimer :In-use/lifestyle image - accessories not included Laser Color :Red Laser Guide :Yes Length (cm) :59.69 Length (in) :23.5 Length (mm) :596.9 Maximum Miter Cut - Left(deg) :50 Maximum Miter Cut - Right(deg) :50 Maximum Speed(RPM) :5000 Miter Stop :Yes Model Description :7-1/4-in Compact Sliding Single-Bevel Miter Saw Motor Warranty Labor(Months) :36 Motor Warranty Parts(Months) :36 Number Of Teeth :40 Power Rating (HP) :0 HP Quick Release Vise :No Safety Listing :UL safety listing Saw Blade Diameter :7-1/4-in Series Name :Compact sliding Slide :Yes Spindle Lock :Yes Sub-brand :Kobalt Tool Weight(kg) :10.187856 Tool Weight(lbs.) :22.46 Warranty :3-year limited Width (cm) :55.88 Width (in) :22 Width (mm) :558.8 Worm Drive :No

Frequently bought together

WOODS
Woods 12/3 Extension Cord 25' Yellow
Format 12/3 25'
Article #74045239
Model #1697SW0002
★★★★★ ★★★★★
0
(0)
YELLOW JACKET
Single Outlet Portable GFCI Adapter - 1800 W - 15 A
Article #32045050
Model #14650013-6
★★★★★ ★★★★★
0
(0)
YELLOW JACKET
6-Outlet Power Bar with Surge Protection - 6' - Yellow
Format 1.8M
Article #32045053
Model #5139NSP
★★★★★ ★★★★★
3
(2)
SPYDER
Spyder Tarantula Circular Saw Tungsten Carbide Blade - 7.25-in 60 Teeth
Format 7 1/4"x60TH
Article #65165014
Model #13018CA
★★★★★ ★★★★★
0
(0)
SPYDER
Spyder Tarantula Framing 7.25-in 24-Tooth Tungsten Carbide Steel Circular Saw Blade - Pack of 10
Format 7 1/4"x24TH-BX10
Article #65165031
Model #13017CA
★★★★★ ★★★★★
0
(0)
KOBALT
Kobalt Rolling Mitre Saw Stand - Adjustable - Steel - 400-lb Capacity
Article #97925011
Model #KMS-S16
★★★★★ ★★★★★
3.7
(206)
KOBALT
Kobalt 15 A Portable Table Saw - Carbide-Tipped Blade - 10-in
Format 10"x15AM
Article #41095003
Model #KT10152
★★★★★ ★★★★★
3.9
(250)
KOBALT
Kobalt 24-V XTR Cordless Hammer Drill - 1/2-in - Variable Speed - Battery, Charger and Accessories Included
Format 24V 1/2"
Article #32165048
Model #KXHD 1424A-03
★★★★★ ★★★★★
4.3
(31)

You may also like

BOSCH
Bosch Mitre Saw with Dual-Bevel Glide - 12-in
Format 12"x15AM
Article #19835411
Model #GCM12SD
★★★★★ ★★★★★
4.7
(61)
DEWALT
Dewalt Compound Miter Saw Sliding 12-in 15-amp Motor 3800 RPM
Format 12"
Article #00277597
Model #DWS779
★★★★★ ★★★★★
4.5
(33)
DEWALT
Dewalt Compound Miter Saw 12-in Double Bevel 15-amp Motor
Format 12"
Article #00277596
Model #DWS780
★★★★★ ★★★★★
4.4
(12)
DEWALT
DeWalt Compound Mitre Saw - 15 A - 10-in
Format 10" 15AM
Article #00277180
Model #DWS713
★★★★★ ★★★★★
5
(9)
METABO HPT
Metabo HPT Single Bevel Compound Mitre Saw - 10-in - 15 A Motor
Format 10"x15A
Article #37815225
Model #C10FCGSM
★★★★★ ★★★★★
4.7
(258)
DEWALT
DeWalt Mitre Saw Stand - 29-lb - Adjustable - Aluminium
Article #00275686
Model #DWX723
★★★★★ ★★★★★
4.6
(344)
MAKITA
Makita Sliding Compound Mitre Saw with Laser 10-in 13A
Format 10"x13AM
Article #11975214
Model #LS1018L
★★★★★ ★★★★★
5
(1)
BOSCH
Bosch Gravity-Rise Rolling Mitre Saw Stand - Grey - 300-lb Capacity - Steel
Article #1983257
Model #T4B
★★★★★ ★★★★★
4.8
(26)
DEWALT
DeWalt Rolling Mitre Saw Stand - Adjustable - Black and Yellow - Steel
Article #00275591
Model #DWX726
★★★★★ ★★★★★
3.3
(122)
DEWALT
DeWalt Mitre Saw Stand - Metal - Yellow
Article #00276383
Model #DWX725B
★★★★★ ★★★★★
4.7
(33)
DEWALT
Sliding Mitre Saw - Cordless - 20V MAX - Bare Tool (battery not included)
Format 7 1/4"x20V
Article #00275878
Model #DCS361B
★★★★★ ★★★★★
4.7
(135)
DEWALT
DeWalt DW7451 Table Saw Stand - Black - Folding and Portable - 14-lb
Article #00276275
Model #DW7451
★★★★★ ★★★★★
4.3
(21)
METABO HPT
Mitre Saw Multivolt Metabo HPT - 36 V - 10''
Format 10"x36V
Article #37815201
Model #C3610DRAM
★★★★★ ★★★★★
4.7
(55)
BOSCH
Bosch Single-Bevel Slide Mitre Saw - 18V - 8 1/2-in Blade
Format 8 1/2"x18V
Article #19836362
Model #GCM18V-08N
★★★★★ ★★★★★
0
(0)
MAKITA
Makita 18V x2 LXT Brushless 10-in Slide Mitresaw w/Laser (Tool Only)
Format 10"x18V
Article #11975464
Model #DLS112Z
★★★★★ ★★★★★
5
(2)
KOBALT
Kobalt 10-in 15 A Dual Bevel Sliding Compound Corded Mitre Saw
Format 10"x15AM
Article #89335012
Model #SM2517LW
★★★★★ ★★★★★
3.6
(155)
YAHU
Yahu Universal Stand for Mitre Saw - 330-lb Capacity - Steel - Adjustable - 26.46-lb
Format 65x22.8x35.8"
Article #22745004
Model #YH-MS049
★★★★★ ★★★★★
4.4
(12)
METABO HPT
Metabo HPT Dual Bevel Sliding Mitre Saw with Laser - 12-in - Aluminum
Format 12"x15AM
Article #37815204
Model #C12RSH2SM
★★★★★ ★★★★★
4.7
(203)
BOSCH
Bosch Metal Folding Mitre Saw Stand
Article #19835636
Model #T1B
★★★★★ ★★★★★
5
(2)
CRAFTSMAN
Craftsman 10-in Single Bevel Sliding Mitre Saw
Format 10"x15AM
Article #97925012
Model #CMXEMAX69434501
★★★★★ ★★★★★
4.3
(105)
KOBALT
Kobalt Rolling Mitre Saw Stand - Adjustable - Steel - 400-lb Capacity
Article #97925011
Model #KMS-S16
★★★★★ ★★★★★
3.7
(206)
MAKITA
Makita Mitre Saw Stand - 500-lb Capacity - Easy Installation
Article #11975463
Model #WST06
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Craftsman Cordless Sliding Mitre Saw - 20V MAX - 7 1/4''
Format 7 1/4"x20V
Article #00277177
Model #CMCS714M1
★★★★★ ★★★★★
4.6
(86)
METABO HPT
Metabo HPT Universal Mitre Saw Stand - 400-lb Capacity - Steel
Article #37815176
Model #UU240FM
★★★★★ ★★★★★
3.8
(93)

Can you hook this up to a shop vac?

Asked by: Sarah85
You can hook a shop vac to the bag port of the saw but you may need an adapter for the hose size. I hope this helps.
Answered by: redtailedhawk
Date published: 2022-01-19

Is there a kobalt brand stand for this saw? I went to the store where I bought it and they told me no. 

Asked by: Wilson911
You can use several different stands for this miter saw. I grabbed a Ryobi stand that was on sale at the time. Just measure the width of the bolt holes, and the width of the anchor slots in the stand.
Answered by: Pb65
Date published: 2021-11-29

 How big of a piece of wood will it cut 

Asked by: Dave Ar
You're going to have to build a jig if you want to cut crown moulding without having to deal spring angles. And the crown moulding is going to be limited in size (5 inch tall is pushing it) due to the small saw blade and all the anchors & motors getting in the way of the cut.
Answered by: zkool5
Date published: 2021-07-12

Can this saw cut threw a 4x4 in one shot without having to flip it around to cut all the way threw?

Asked by: Sandy82
for sure it cannot, not even for 3 inch
Answered by: ronnyquetz
Date published: 2021-07-12

Can you adjust depth of cut? (would like to use it for fretting?)

Asked by: Unkamuddy
This one has nothing that will control the depth of cut.
Answered by: Nassir
Date published: 2021-12-25

will this saw cut through a 2 x 10 board?

Asked by: Postie13
It will if you turn the piece over and finish the cut by making a second cut on the other side. The question should be .. Why do you want to cut a 2 x 10 with this size of saw. This is a thin Kref saw that should be used for a more precise cut in trim and mouldings. Even then it took me about 40 minutes to adjust the saw so it would cut at 90 degrees. Buy a 10 in sliding saw if you want to cut these bigger, heavier pieces safely and more easily..
Answered by: OldE58
Date published: 2021-12-25

where is the button to open up the saw

Asked by: SherryDavis2
Its located to the side where the joint is. Where it opens up.
Answered by: may bc garden
Date published: 2019-02-19

can it cut 6 inches tall baseboard?

Asked by: fvbx
Yes it can cut a 6 inches tall baseboard X 1 1/2 inches thick. 
Answered by: Elis
Date published: 2022-07-27
  • y_2022, m_9, d_28, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_CA, sid_89335003, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Kobalt Compact Sliding Single-Bevel Mitre Saw - Corded - 7 1/4-in - 10 A is rated 4.2 out of 5 by 399.
Rated 5 out of 5 by from Great lil' saw! [This review was collected as part of a promotion.] As a professional furniture and cabinet maker I was tired of carrying a heavy miter saw to a job site for just a few cuts. I had looked at this saw for some time but wasn't sure of it capabilities. So finally decided to give one a try. While it appears to be a newer version I think it's an improvement over what I used to look over on the displays. Out of the box it was close to "true" but was very easy to set and I'm surprised at the accuracy. I added a my own per-scission fence and bed plus a fine cut blade ( I didn't try the stock blade so no review on that but it does appear to be a good blade).
Date published: 2018-12-08
Rated 4 out of 5 by from Portable and light yet big capacity and accurate [This review was collected as part of a promotion.] What a Dandy little saw this is! It is exactly what I wanted! I already have a 12" chop saw that is great to keep in my shop but too heavy and bulky to drag around (even with the fancy folding stand it is on). I wanted a saw that I could throw in the back of the truck easily and take with me. I bought a non-sliding little Delta chopsaw but the capacity was terrible. This little Kobalt excels because of the slide. I did knock off a star because there is no decent carry handle for one-handed carry. Not a big deal but would've made a big difference. The laser is icing on the cake AND it is easily adjustable! What a deal! Go get one!
Date published: 2019-05-04
Rated 2 out of 5 by from Buyer beware I bought a Kobalt sliding mitre saw about 2 yrs ago and the guard broke at the centre washer. I tried working with it but found it was binding when moving it to the cutting position. I've been working with the guard removed for since last fall (2018). Today ( Sept) I found a machine screw lying on the work bench. It's from the mechanism that locks the saws radial left right movement. I attempted to screw it back in only to find the threads were stripped. Stopped using the laser too because it was such a hassle. Maybe I just bought a lemon but it's the last Kobalt for me. I'm 69 yrs old and this is the worst saw I've ever owned. I gave it two stars because it's still working.
Date published: 2019-09-08
Rated 3 out of 5 by from Okay saw but fence is poor I bought the saw to do baseboard. I checked the 90 to the blade and table and left side of the one peice fence. All was true, but once I started cutting smaller cuts I noticed the blade would bind and at one kicked back the cut off. I used a straight edge to check everything and found that the left and right side of the one-piece ence isn't true. It's slightly staggered. Long pieces cut fine but shorter cuts were off by a great deal. The only way to fix is to resurface the fence, hammer the center, or cut the fence into two peices to make both sides adjustable . Dust collection is terrible even with shop vac and missing wingnut for the hold down support . I'm not sure why it's so hard to make fence true
Date published: 2022-01-17
Rated 5 out of 5 by from The saw works pretty good and is a good price For the price, this seams like a great saw. It made my flooring job much easier! drawbacks =================== I wish it did have a slightly larger blade so I did not need to slide it as much but that is minor. The saw dust bag does not capture much dust. When I cut at 90 degrees it did not seem to be perfectly square. Maybe there is an adjustment that I need to make. advantages =================== great price had enough power to cut pretty quick. lots of degrees of movement (angle, blade angle, sliding) its not to heavy the angle is pretty east to read and adjustments are easy to make. Overall, I am happy with my purchace and am glad I got this one.
Date published: 2018-04-30
Rated 5 out of 5 by from Great little saw [This review was collected as part of a promotion.] Got this last week to do some projects around the house. I built some outdoor steps with it. The cuts were precise and smooth. The laser is easy to adjust. However, the laser wasn't bright enough to see with the garage door open and the sun shining in. With the garage door closed, it was fine. The blade cut smoothly and quickly. The slider was was precise and smooth. The dust collector worked great. Great little saw for the price. It won't do 4 inch thick lumber, but for anything less is great.
Date published: 2018-08-19
Rated 5 out of 5 by from Great lightweight saw [This review was collected as part of a promotion.] I have been using this saw for about a month. I bought this to cut 2x4 framing and interior/exterior pine trim boards for my camp. Did not want to take my 12" saw back and forth from home due to weight and the hassle of dismounting/ remounting from my saw bench. This Kobalt saw was the perfect solution. When I go to help my kids at their house with a project it fits easily in the trunk of the Toyota Camry. I don't need to take the pick up truck. Only 2 shortcomings: Need to flip boards to make opposing miter cuts, and the laser could be brighter. Otherwise I think it is a good addition to my tool collection.
Date published: 2019-09-29
Rated 4 out of 5 by from 5 stars? Close! Bought this a year ago for a fence build to make it easy. It made it easy. Recently used it to build some hexagon shelves and do some trim work. Fence is warped. Called them, but out of warranty. I realize I'm past my year but do you think I heated this thing up, bent it, then called, just to be annoying and waste everyones time? Nope. All I wanted was a new piece, just a somewhat straight alignment. Do yourself a favour and check it over, my mistake I should have earlier. Fence building is more of a social thing, beer and more beer, then an accuracy thing. Still runs, still cuts, fashioned up a new fence. Now accurate. Solid 4 star. New fence would make it 5 easy.
Date published: 2020-03-01
  • y_2022, m_9, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_24, tr_375
  • loc_en_CA, sid_89335003, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store