Halloween DecorInflatable DecorationsLighting and Special EffectsIndoor DecorationsOutdoor Decorations

Irwin - Marples Forstner Wood Drill Bit - 1" - Steel

Article#02445406 Model#1966900 Format1"
Irwin - Marples Forstner Wood Drill Bit - 1" - Steel
 

Description

Produce clean pocket or flat-bottomed holes for any project using this Forstner wood drill bit by Irwin, featuring sharp angled teeth for more rapid cutting. A pointed tip penetrates both soft and hard woods. The steel construction delivers long-lasting, reliable performance. With its reduced shank, this Irwin wood drill bit is compatible with multiple drill and drill press models 3/8" or larger.

You may also like

WOLFCRAFT
WOOD DRILL BIT
Format 1/8"
Article #02105387
Model #2768405
★★★★★ ★★★★★
0
(0)
WOLFCRAFT
WOOD DRILL BIT
Format 3/16"
Article #02105388
Model #2769405
★★★★★ ★★★★★
0
(0)
BOSCH
METAL DRILL BIT
Format 29/64x5 5/8"
Article #19835256
Model #BL2156
★★★★★ ★★★★★
0
(0)
BOSCH
METAL DRILL BIT
Format 11/64x3 1/4"
Article #19835245
Model #BL2138
★★★★★ ★★★★★
0
(0)
BOSCH
METAL DRILL BIT
Format 15/32x5 3/4"
Article #19835257
Model #BL2157
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
SCREWDRIVER BIT
Format #2x1"
Article #34595574
Model #82225
★★★★★ ★★★★★
0
(0)
MAKITA
Drill Bit Kit - Round Shank - 1/16" to 1/2" - 18 Bits
Format 18PC
Article #11975427
Model #T-03006
★★★★★ ★★★★★
0
(0)
VERMONT AMERICAN
"Extra-Hard" Phillips Power Bit - #2 -1 5/16"
Format #2x1 5/16"xCR1
Article #1354405
Model #15052
★★★★★ ★★★★★
0
(0)
VERMONT AMERICAN
Drill Bit for Metal - Cobalt - 1/4" X 4"
Format 1/4"x4"xCR1
Article #1354709
Model #12666
★★★★★ ★★★★★
0
(0)
DEWALT
Titanium Drill Bit - Impact Ready - 7/16"
Format 7/16"
Article #00275990
Model #DD5128
★★★★★ ★★★★★
0
(0)
IRWIN
DRILL BIT WD AUGER
Format 5/8X71/2"
Article #0159074
Model #49910
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
SCREWDRIVER BIT
Format #2x2"
Article #34595575
Model #83007
★★★★★ ★★★★★
0
(0)
BOSCH
BlueGranite Carbide Tip Hammer Drill Bit - 7/8" x 12"
Format 7/8x12"
Article #13545493
Model #HCBG25
★★★★★ ★★★★★
0
(0)
DEWALT
Nut Driver for Impact Driver
Format 1/4"
Article #00275430
Model #DW2218IR
★★★★★ ★★★★★
5
(3)
BOSCH
CONCRETE DRILL BIT
Format 1/2x10"
Article #1983036
Model #HC2084
★★★★★ ★★★★★
4.2
(43)
BOSCH
CONCRETE DRILL BIT
Format 3/8x6"
Article #13545479
Model #HCBG12
★★★★★ ★★★★★
1
(1)

Technical specifications

Model :Marples Type :Forstner wood drill bit Component :Steel Utilization :Create flat bottomed holes or pockets holes Diameter :1" (2.54 cm) Shafts :Reduced shank fits 3/8" (0.95 cm) and larger drills and drill presses Packaging :Each
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Irwin - Marples Forstner Wood Drill Bit - 1" - Steel is rated 4.2 out of 5 by 18.
Rated 5 out of 5 by from Countersink I bought this to use to countersink a nut on the back of a wall hanging so it would be flush with the wall. I was using a DeWalt cordless 20v max drill. It worked perfectly. It didn't grab the wood and draw me into it like an auger would. It kept itself level and did exactly what I wanted.
Date published: 2016-08-22
Rated 4 out of 5 by from Good bit for the price Like I said a good bit for the price. It may not be the best bit but your not paying for a high dollar German made one. considering you may only use it for a few holes and as long as it is used in wood (or in my case plastic) it will do the job. I like using a forstner over a spade type for a clean and precise hole. Great for deep holes where you will be inserting dowels for furniture projects or for hinges. Best used in a drill press to get maximum precision. Avoid a lot of pressure if breaking thru the back side to avoid chipping. [This review was collected as part of a promotion.]
Date published: 2018-10-06
Rated 1 out of 5 by from It doesn't cut a flat bottom The cutting spurs along the outer edge cut deeper than the remainder of the inner area therefore the bottom of the hole isn't flat.
Date published: 2016-11-16
Rated 5 out of 5 by from Cuts like butter! I used this 1” Forstner Drill Bit to put 1” magnets on the back of a beer bottle opener. I’ve used it for several projects and will purchase it again if it begins to dull. So far so good! [This review was collected as part of a promotion.]
Date published: 2018-12-29
Rated 1 out of 5 by from Useless bit This bit has a round shank, without any facets. Trying to drill some 1/2" deep holes in alder. After three holes, the bit just spins out of the drillpress chuck. Waste of money
Date published: 2018-04-22
Rated 4 out of 5 by from Good It works, I mean I got this for my husband for Christmas to do woodworking projects for me. 16 days until Christmas. I’m very excited can you tell? Yeah so I don’t know if it works but I really hope so. [This review was collected as part of a promotion.]
Date published: 2018-12-09
Rated 5 out of 5 by from Nice My Husband is doing better since he’s got into woodworking Thanks to you all He’s a veteran and makes canes for the disabled veterans this drill bit is just what he needed he said it works really good. [This review was collected as part of a promotion.]
Date published: 2019-03-08
Rated 4 out of 5 by from Excellent Bit Works quickly & makes a nice clean hole that's flat at the bottom. Functioned beautifully for adding Pullman balances to replace the old pulleys & counter-weights in mom's beautiful old windows. [This review was collected as part of a promotion.]
Date published: 2018-11-21
  • y_2019, m_10, d_27, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_CA, sid_02445406, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store