Marples Forstner Wood Drill Bit - 3/4"

Article#02445405 Model#1966898 Format3/4"
Marples Forstner Wood Drill Bit - 3/4"
 

Description

Drill flat-bottom holes and pocket holes quickly, easily and precisely with this Irwin Marples forstner drill bit. It features ultra-sharp teeth that drill clean holes with a fine, smooth finish. The teeth angles maximize speed of cut and power through soft and hard wood efficiently. The forstner drill bit is made of steel for strength and durability, and it has a reduced shank that fits drills and drill presses 3/8 inch and larger.

Technical specifications

Component :Steel Diameter :3/4" (1.9 cm) Packaging :Each Model :Marples Type :Forstner wood drill bit Utilization :Create flat bottomed holes or pockets holes Shafts :Reduced shank fits 3/8" (0.95 cm) and larger drills and drill presses

You may also like

BOSCH
Glass and Tile Drill Bit - 1/4"
Format 1/4"
Article #19835551
Model #GT300
★★★★★ ★★★★★
1.8
(5)
BOSCH
Glass and Tile Drill Bit - 3/16"
Format 3/16"
Article #19835550
Model #GT200
★★★★★ ★★★★★
1
(1)
BOSCH
Drill Bit for Glass and Tile - 5/16''
Format 5/16"
Article #19835552
Model #GT400
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Masonry Drill Bit - 3/16" x 6" - Carbon Steel
Format 3/16x6"
Article #19836320
Model #LBHX003
★★★★★ ★★★★★
5
(2)
BOSCH
Bosch Masonry Drill Bit - 5/32" x 6" - Carbon Steel
Format 5/32x6"
Article #19836319
Model #LBHX002
★★★★★ ★★★★★
0
(0)
BOSCH
CONCRETE DRILL BIT
Format 5/32x6"
Article #1983025
Model #HC2001
★★★★★ ★★★★★
3.6
(14)
BOSCH
Bosch Masonry Drill Bit - 1/4" x 6" - Carbon Steel
Format 1/4x6"
Article #19836321
Model #LBHX004
★★★★★ ★★★★★
1
(1)
BOSCH
Titanium-Coated Metal Drill Bit - 1/8'' x 2 3/4'' - 2-Pack
Format 1/8x2 3/4"xPK2
Article #13545442
Model #TI2135
★★★★★ ★★★★★
0
(0)
BOSCH
Daredevil(TM) Standard Spade Bit - 1'' x 6''
Format 1"
Article #19835690
Model #DSB1013
★★★★★ ★★★★★
0
(0)
BOSCH
Cobalt Metal Drill Bit - 1/8'' x 2 3/4''
Format 1/8x2 3/4"
Article #19835213
Model #CO2135
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch-4-Piece Glass Tile Drill Bit Set
Format 4PC
Article #19835447
Model #GT2000
★★★★★ ★★★★★
3.3
(3)
BOSCH
Daredevil(TM) Standard Spade Bit - 1 1/4'' x 6''
Format 1 1/4"
Article #19835691
Model #DSB1017
★★★★★ ★★★★★
0
(0)
BOSCH
CONCRETE DRILL BIT
Format 3/16x6"
Article #1983026
Model #HC2011
★★★★★ ★★★★★
4.2
(17)
BOSCH
Bosch Masonry Drill Bit - 1/8" x 3" - Carbon Steel
Format 1/8x3"
Article #19836318
Model #LBHX001
★★★★★ ★★★★★
1
(1)
BOSCH
Bosch® Wide Chisel Bit - 1 1/2"
Format 1/2x10"
Article #19835046
Model #HS1425
★★★★★ ★★★★★
4.9
(8)
BOSCH
Square Insert Bit
Format #2x6"
Article #19835339
Model #CCSQ2601
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Masonry Drill Bit - 3/8" x 6" - Carbon Steel
Format 3/8x6"
Article #19836323
Model #LBHX008
★★★★★ ★★★★★
4.3
(32)
BOSCH
Daredevil Standard Spade Bit Set - 3 Pieces
Format 3PC
Article #19835693
Model #DSB5003
★★★★★ ★★★★★
0
(0)
BOSCH
Daredevil Extended-Length Spade Bit - 1/2" x 16"
Format 1/2"x16"
Article #19835681
Model #DLSB1005
★★★★★ ★★★★★
0
(0)
BOSCH
Square Insert Bit
Format #2x3"
Article #19835354
Model #SQ2301
★★★★★ ★★★★★
0
(0)
BOSCH
Titanium-Coated Metal Drill Bit - 3/16'' x 3 1/2''
Format 3/16x3 1/2"
Article #13545446
Model #TI2139
★★★★★ ★★★★★
0
(0)
BOSCH
CONCRETE DRILL BIT
Format 3/8x4"
Article #1983028
Model #HC2061
★★★★★ ★★★★★
4.2
(36)
BOSCH
Daredevil Extended-Length Spade Bit - 3/4" x 16"
Format 3/4"x16"
Article #19835683
Model #DLSB1009
★★★★★ ★★★★★
0
(0)
BOSCH
Daredevil Extended-Length Spade Bit - 3/8" x 16"
Format 3/8"x16"
Article #19835680
Model #DLSB1003
★★★★★ ★★★★★
0
(0)
BOSCH
SDS Chisel Drill Bit
Format 3/4x10"
Article #1983079
Model #HS1420
★★★★★ ★★★★★
5
(1)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Marples Forstner Wood Drill Bit - 3/4" is rated 4.6 out of 5 by 19.
Rated 5 out of 5 by from Perfect Holes I am building a home theater and need to run wiring through a lot of studs. Tried the Irwin Speedbor bits, but it look a lot of forward and reverse back and forth action on my drill to get through 2x6 studs. This Forster bit goes right through without stopping. It doesn't get stuck like the Speedbor or standard Irwin auger bits do. You still need to apply pressure to push the bit through... but much easier in my opinion. Highly recommended. My only complaint is that the shank is round, and not hex... so you can get slippage. When the hole is complete I run a Speedbor but through it just to get it smooth and perfectly straight... FYI for the perfectionists out there.
Date published: 2017-11-12
Rated 5 out of 5 by from Should have purchased this from the beginning We went through 4 paddle bits wearing out on us before we got even half way through our project before I bought this one. It works way better than a paddle bit and lasts a lot longer! Well worth the price I paid! Just wish I'd started the project with this bit instead. Would have saved me money in the in the long run. [This review was collected as part of a promotion.]
Date published: 2019-07-13
Rated 4 out of 5 by from Needs improvement It would be nice if this bit had a stepped shank instead of one size. It would also be nice if the center point was just a bit longer, maybe 1/3rd longer. The price was fair and the bit is pretty solid. It could just use a couple tweaks to make it 5*. [This review was collected as part of a promotion.]
Date published: 2018-10-05
Rated 4 out of 5 by from Servicable Bit I has to sort through several packaged bits hanging on the rack to find a bit that did not have one or more minor imperfection(s), mostly on the cutting spur. Look carefully... Otherwise, the bit I finally selected performed well. [This review was collected as part of a promotion.]
Date published: 2019-07-24
Rated 4 out of 5 by from 3/4 in Forstner bit did the job I have the occasion to use Forstner bits on a regular basis, but needed a 3/4 inch. My usual source was out of that size so I found this as a second choice. I will be back for others. The cut was clean as could be. [This review was collected as part of a promotion.]
Date published: 2019-01-26
Rated 4 out of 5 by from Good bit so far It’s really hard to give viable review after only one use but that being said, this bit cuts very clean with no chipping I used it in pine and was very please with it for the price. [This review was collected as part of a promotion.]
Date published: 2018-10-20
Rated 5 out of 5 by from A work horse This item is using the latest design (technology?) for a perfect bore hole. No splinting on either side of your wood project. Highly recommended. [This review was collected as part of a promotion.]
Date published: 2019-08-14
Rated 5 out of 5 by from Great Bit - Even on Oak Worked well for holes on 3/4 inch oak. Pretty dull afterwards, but cut cleanly without chipping. Great non-carbide bit for a decent price. [This review was collected as part of a promotion.]
Date published: 2018-11-11
  • y_2020, m_9, d_22, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_CA, sid_02445405, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store