Our stores will remain open for your essential needs. See COVID Restrictions. Details

L'article sera livré en bordure de trottoir en raison des restrictions de poids

Item will be delivered curbside due to weight restrictions

Metabo HPT 2-in to 3 1/2-in 30° Pneumatic Strip Framing Nailer

METABO HPT

Metabo HPT 2-in to 3 1/2-in 30° Pneumatic Strip Framing Nailer

Article #37815181 Model #NR90ADS1M Format2-3 1/2"x34DG

Our stores will remain open for your essential needs. See COVID Restrictions. Details

L'article sera livré en bordure de trottoir en raison des restrictions de poids

Item will be delivered curbside due to weight restrictions

Description

With its selective actuation switch, this Metabo HPT pneumatic framing nailer lets you change from sequential to contact nailing to suit your project. The 30° nailer accommodates nails from 2" to 3 1/2" and lets you adjust the depth without tools. The rear-load, tilt bottom magazine makes reloading stripes hassle-free, and the open-nose design ensures easy removal of nails.

APPLICATIONS: Great for floor and framing, roof decking and housing construction
LIGHTWEIGHT: Only 7 lbs and well- balanced for ease of maneuverability and less user fatigue
SELECTIVE ACTUATION: Allows for quick transitions between sequential and contact nailing with the simple flip of a switch
FASTENERS: Accepts 2-in up to 3-1/2-in paper collated framing nails
DEPTH ADJUSTMENT: Easy tool-less adjustment dial allows for countersink or flush driving nails into a variety of materials
LOADING: Two-step nail loading makes fastener replenishment quick and easy

Technical specifications

Wi-Fi Compatibility :No Works with Android :No Works with iOS :No Power Source :Pneumatic Base Warranty Parts(Months) :60 ANSI Compliant :Yes App Compatibility :No Base Warranty Labor(Months) :60 Battery Included :No (bare tool) Battery Recharge Time(hrs) :0 Battery Size :N/A Battery Voltage :N/A Bluetooth Compatibility :No Case Type :N/A Charger Included :No Collation Material :Strip Collation Type :Angled Cordless :No Degree :30 Depth Control :Tool free Housing Material :Aluminum Inlet Size in Inches :3/8-in Jam Clearing :Tool free Magazine Capacity :86 Maximum Nail Diameter :0.162-in Maximum Nail Length(cm) :8.89 Maximum Nail Length(in) :3.5 Maximum Nail Length(mm) :88.9 Maximum PSI :120 Minimum Nail Length(cm) :5.08 Minimum Nail Length(in) :2 Minimum Nail Length(mm) :50.8 Nail Gauge :N/A Pneumatic :Yes Required Pressure (PSI) :70 PSI Series Name :N/A Strip or Coil :Strip Sub-Brand :N/A Type :Framing Warranty :5-year limited Weight(kg) :3.1752 Weight(lbs.) :7

Frequently bought together

CAMPBELL HAUSFELD

"Quiet Series" Electric Air Compressor - 8 Gal. - 1.0 HP

Campbell Hausfeld 3.7-HP 60-gal. 175 psi Navy Vertical Air Compressor

Campbell Hausfeld 5 HP 80-gal. 175 psi Navy Vertical Air Compressor

Campbell Hausfeld Industrial Coupler and Plug Set

Campbell Hausfeld 17-Accessory Set

M-D Canada Contractor Air Hose - 3/8-in x 25-ft

20-Piece Air Compressor Accessory Kit

M-D Canada Contractor Air Hose - 3/8-in x 50-ft

Tire Inflator with Gauge

Degil Anti-Fog Safety Glasses - Polycarbonate Lenses - Nylon Frame - Scratch Resistant

Degil Safety Glasses - Polycarbonate Frame and Lens - Scratch Resistant - Transparent

Is there a rafter hook that fits onto this gun or what rafter will fit?

Asked by: Dodobirdy

Hi there. This nailer does not come with a rafter hook. However there are many after market options for rafter hooks that could work on this unit. Hope this helps.

Answered by: Metabo HPT

Date published: 2022-06-06

I'm wondering if I can use this nailer gun with this compressor? https://www.portercable.com/products/power-tools/air-compressors/air-compressor-combo-kits/3nailer-and-compressor-combo-kit/pcfp3kit

Asked by: Clauber

Hi there. It appears that specific Porter Cable pancake compressor would not be a good choice for the Metabo HPT framing nailer- it likely doesn't provide enough air for framing applications. If you were to use it- it would likely be running almost constantly. You may want to consider a larger compressor like Metabo HPT's EC99S that you may be able to special order thru the Pro Desk potentially or consider a wheelbarrow compressor type that is more suitable for larger framing applications. Hope this helps.

Answered by: Metabo HPT

Date published: 2022-01-12

Can I use round head or offset head nails also in this mail gun? I know they must be thirty degree, paper collated but a friend was convinced it would take a variety of nail head types. Thanks!

Asked by: Huckle22

HI there. The NR90ADS1M has a thirty degree magazine. Therefore it can accept any 30 degree paper collated "clipped head" nails OR "round head offset" paper collated nails. If you want to use round head nails that are plastic collated, then you would need to consider our model NR90AES1M which has a 21 degree magazine and only accepts 21 degree plastic collated round head nails. Hiope this helps.

Answered by: Metabo HPT

Date published: 2021-09-20

Will it use Pasload nails?

Asked by: JCMCC

Hi there. The NR90ADS1M will accept paper collated clipped head nails ranging from 2" - 3-1/2" in length and .113"- .148" in diameter. If your Paslode nails meet these specifications you can use them. We do offer a full line of genuine Metabo HPT fasteners that will also work in this tool. Hope this helps.

Answered by: Metabo HPT

Date published: 2021-07-30

Metabo HPT 2-in to 3 1/2-in 30° Pneumatic Strip Framing Nailer is rated 4.5 out of 5 by 154.

Rated 5 out of 5 by James from Real work horse! [This review was collected as part of a promotion.] I purchased this to build a shed from scratch. Right now I have all four walls up and the roof is going on next. During one part of the construction I mistakenly nailed into a very hard knot in a 2 by 4. This resulted in a nail only half sunk into the board and a very twisted and distorted nail that was also now jammed in the head of the nailer. I had to remove the nail from the gun with a small punch and hammer, all the while wondering, how will it perform afterwards? It hasn't missed a beat!

Date published: 2018-11-09

Rated 5 out of 5 by Hudson from Honest Opinion I saw a lot of bad reviews for this nailer when I bought it and it had me worried. I’m a carpenter by trade and my ancient (but paid for itself 100 times over) porter cable had just blown its guts out of the trigger slot and I needed something that would last but at a decent price. I had my heart set on the Max Superframer that I’ve grabbed on site and loved but this gun was on a decent sale so I bought it. I’ve ran it at least eight hours a day, five to six days a week for three months now without any issues even after my co-worker launched it off the roof of a three story apartment complex. I’ve never been disappointed by my hitachi tools, and the name change certainly hasn’t changed the quality. I kicked myself at the time that I didn’t shell out the extra money for the HPT NR83A5 but this gun’s not let me down yet after a rigorous trial period and after the abuse it’s taken. I’d recommend it to anybody, pro or diy. Good gun at a good price.

Date published: 2020-11-06

Rated 5 out of 5 by Deejay from Metabo HPT MetaboHPT 3.5-in-Gauge Framing Nailer [This review was collected as part of a promotion.] I've already run the first box of 2500 3-1.4" nails through this unit and it works flawlessly. I've used older units in the past that weighed 15 to 18 pounds and this is a nice light 7 pounds! It's a dream to use with these old shoulders. You almost don't know your working. I highly recommend this tool. If fact I liked it so much I replaced an older much heavier roofing nailer with a Metabo yesterday. Great job guys!

Date published: 2019-11-01

Rated 5 out of 5 by Mike from Wayyy better than expected! I started using this after I return the Dewalt 28 degree 20v and a Dewalt 21 degree wire weld framing nailer. Neither of those would grip the wood when toe nailing and they had way more recoil. This gun bites the wood, has very little recoil and is just really smooth. My father tried it out too and he loved it compared to his paslode. I love the fact that it’s a simple flip of a switch to bump fire when plating etc and I can just flip it back when I want to be in more control. I’d buy this again without hesitation.

Date published: 2020-08-18

Rated 5 out of 5 by Eric1234 from Good quality nailer [This review was collected as part of a promotion.] This is a good nailer, I’ve used it to build two structures now and I have had no issues with it. It has two modes the single fire and bump fire which is really nice for what the price is, and that is another thing that makes this nailer so good is because it’s cheap and includes all the features more high end expensive nailers include. Another pro about this item is the durability is very good, I have accidentally left the item out in the weather a few times and dropped it too none of which has caused a single issue with the nailer. This is an all around good product and would recommend.

Date published: 2022-02-07

Rated 5 out of 5 by ColoradoMan from Good buy. No problems here. Works just fine. Just homeowner use.

Date published: 2016-07-05

Rated 5 out of 5 by Dan from I am disabled veteran, I decided with my daughter to try my hand at a out building! This is one great self gift in years! Beats the heck out of a hammer! I get a 10% discount being a Vet ! If I had to buy it at full price plus 10% , heck yeah! This is a great tool!

Date published: 2016-10-19

Rated 5 out of 5 by ken from This is a little animal! [This review was collected as part of a promotion.] I bought it to build a foot bridge crossing a creek to our camp. It's almost 120'long. We used solid white oak. You can't get much harder than that. It easily drove 3" nails through a 1' white oak board into a solid white oak 3X4. That's 4 inches of solid white oak. Almost no splitting at all. I don't know how much more you could ask of it.The only problem we had is we found out it works better when you load the nails in the correct way. LOL For the price I don't know how you could ask any more out of a tool!

Date published: 2019-06-10

Metabo HPT 2-in to 3 1/2-in 30° Pneumatic Strip Framing Nailer Reviews - page 2

Metabo HPT 2-in to 3 1/2-in 30° Pneumatic Strip Framing Nailer

Description

Technical specifications

Frequently bought together

You may also like

Is there a rafter hook that fits onto this gun or what rafter will fit?

I'm wondering if I can use this nailer gun with this compressor? https://www.portercable.com/products/power-tools/air-compressors/air-compressor-combo-kits/3nailer-and-compressor-combo-kit/pcfp3kit

Can I use round head or offset head nails also in this mail gun? I know they must be thirty degree, paper collated but a friend was convinced it would take a variety of nail head types. Thanks!

Will it use Pasload nails?

Changing store