Halloween DecorInflatable DecorationsLighting and Special EffectsIndoor DecorationsOutdoor Decorations

Mitre Saw Stand

Article#00275686 Model#DWX723
Mitre Saw Stand
 

Description

This universal design works with all brands of mitre saws. Its lightweight aluminum construction (35 lb) allows for easy transport to and from the job site. The 5 1/2 ft beam extends to support up to 16 ft. of material and up to 500 lb. The legs provide superior support and fold for easy storage. Leg lock levers allow for fast and easy set up. This mitre saw mounting brackets allow easy and secure mounting of the tool to the stand. Work stops and supports can be repositioned quickly anywhere along the rail. The non-marring feet on tool mount will not scratch material. Mitre saw sold separately.

You may also like

HITACHI
Mitre Saw Stand - 12" Saw Max - 8' - 400 lb Capacity
Article #37815182
Model #UU240F
★★★★★ ★★★★★
3.8
(68)
HITACHI
Compound Dual Bevel Mitre Saw with Laser - 10" - 3200 RPM
Format 10"x15A
Article #37815183
Model #C10FSHC
★★★★★ ★★★★★
3.6
(16)
BOSCH
Gravity-Rise Miter Saw Stand - Grey
Article #1983257
Model #T4B
★★★★★ ★★★★★
4.7
(13)
DEWALT
Compound Mitre Saw - 15 amp - 10"
Format 10" 15AM
Article #00277180
Model #DWS713
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Craftsman Cordless Sliding Mitre Saw - 20V MAX - 7 1/4''
Format 7 1/4"x20V
Article #00277177
Model #CMCS714M1
★★★★★ ★★★★★
4.6
(29)
DEWALT
Compound Mitre Saw - 12" - Single-Bevel
Format 12" 15AM
Article #00277181
Model #DWS715
★★★★★ ★★★★★
0
(0)
BOSCH
Sliding Compound Mitre Saw - 8 1/2" - 12 A
Format 8 1/2"x12AM
Article #19835918
Model #CM8S
★★★★★ ★★★★★
4.2
(5)
MAKITA
Mitre Saw Workstation
Article #11975181
Model #194943-7
★★★★★ ★★★★★
0
(0)
DEWALT
Compound Miter Saw - 12"
Format 12"x15A
Article #0027240
Model #DW715
★★★★★ ★★★★★
4.7
(226)
MAKITA
10-in Laser Mitre Saw
Format 10"x13AM
Article #11975214
Model #LS1018L
★★★★★ ★★★★★
0
(0)
BOSCH
12" Glide Miter Saw with Stand - Composite - 15 A
Format 12"x15AM
Article #19836216
Model #GCM125SD-T1B
★★★★★ ★★★★★
0
(0)
YAHU
Universal Stand for Mitre Saw
Format 65x22.8x35.8"
Article #22745004
Model #YH-MS049
★★★★★ ★★★★★
5
(2)
DEWALT
Table Saw Stand - Folding and Portable
Article #00276275
Model #DW7451
★★★★★ ★★★★★
4.6
(5)
METABO HPT
Metabo HPT Single Bevel Compound Mitre Saw - 10'' - 15 A
Format 10"x15A
Article #37815225
Model #C10FCGSM
★★★★★ ★★★★★
0
(0)
MAKITA
Slide Compound Mitre Saw - 8 1/2 in
Format 8 1/2"x10.5AM
Article #11975335
Model #LS0815FL
★★★★★ ★★★★★
5
(1)
MAKITA
Mitre Saw With Support - 10" - 15 A
Format 10"x15AM
Article #11975392
Model #LS1019X1
★★★★★ ★★★★★
0
(0)

Technical specifications

Height :6" (folded) - 32" (extended) Width :72" (folded) - 150" (extended) Warranty :3-year limited warranty, 1-year free service contract, 90-day money-back guarantee
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Mitre Saw Stand is rated 4.7 out of 5 by 182.
Rated 5 out of 5 by from A BIG HELPER Purchased this stand wtih the DWS780 today. I put the stand together, 10 minutes and put the saw on it and love this stand. Do not know how I ever worked without one. Just the righ height for me. Love the stops, how the extend. I build cedar chest and cedar swings, so I cut a lot of boards the same length. This stand will save me 15 to 30 minutes per project. Stand seems to be of good quality. Everything is easy to adjust on it. A little tricky at first getting the saw on and off ot it but I think that has more to do with the bulkness of the saw. Would definitely recommend this stand for anyone who has a miter saw.
Date published: 2013-08-26
Rated 4 out of 5 by from Sturdy stand, easy to set up I was looking to buy a cheaper brand but that stand that was not available in the store. So I bought the Dewalt instead. I use it for a Hitachi 12 inch, 15 amp miter saw. The stand sets up out of the box very quickly. The instructions say to use plywood hen mounting a saw not made by Dewalt. However, I found my Hitachi mounted directly to the stand with no problems using the hardware provided. The stand is very sturdy. A minor issue for me is the supports at the end of the beams are still a little short when fully raised to hold work truly level with the surface of my Hitachi. I'll adjust with a wood shim. I am happy with the purchase.
Date published: 2014-07-22
Rated 1 out of 5 by from disappointed Bought the saw stand on Saturday. Looking forward to starting a new framing job on Monday. Unfortunately the end stop support assemblies, which are held to the slide out tubes would not tighten. After inspection the thread in the tube end is spot welded to 1mm sheet metal which just keeps distorting as you tighten the attachment screw. Consequentially you get useless floppy supports and stops. Very disappointed in this DeWalt product.
Date published: 2018-03-19
Rated 1 out of 5 by from Poor Quality I'm not a contractor, just a home gamer who uses his miter saw 4-5 times per year. I thought having this stand and the miter saw would give me a good setup that I could store away conveniently. This was the case for four years, but the last time I used the saw both of the stand clamps clicked into place and then barfed small metal parts all over the floor. It was really fun to pick all those up, then scratch my head about where they went. Reassembling the clamps did not yield working parts, so I get to replace them. If I was a contractor, I would imagine that this failure would happen within a couple of months of purchase, as I would estimate the number of times I used this setup to be under 20.
Date published: 2019-06-27
Rated 5 out of 5 by from Versatile addition for a miter saw. Came free with purchase of Dewalt DWS780 miter saw. Great for DIY homeowners who work alone a lot. Supports up to 16ft of lumber. Built in end stops great for same length repetative cuts. Holds a lot of weight and folds up and doesn't take much room to store.
Date published: 2013-10-28
Rated 5 out of 5 by from Versitle Stand I have had my eye on the stand for a while and received it for Christmas from the wife after dropping several hints. Why did I wait so long, this stand has perfect stance and height for someone of average height. I am 6 ft tall and I don't have to bend down real far to line up what I am trying to cut. The mounting brackets matched up to my Hitachi miter saw without any hassle. The stand remains stable even on my uneven garage floor, which is a real plus for me. The side supports even match up to the height of my Hitachi saw, but just barely. The side supports are completely maxed out and I would have liked a like more adjustment in the height of the side stands. That may be due to the different brand of saw that I have attached. One feature I really like is the fact that I can slide the saw and the side supports to any position on the stand, which allows for complete customization of stands' components. All things considered I really like this stand and I just wish I wound not have waited so long to get it. Other than the side support issue I have, this is the perfect miter saw platform!
Date published: 2014-01-15
Rated 5 out of 5 by from Great stand, heavy duty Heavy duty, holds long lumber without any problems, easy to use.
Date published: 2013-03-26
Rated 5 out of 5 by from Great product This is a heavy duty stand. Easy to set up and take down. I looked at several miter saw stands and for the money it's the best
Date published: 2013-10-01
  • y_2019, m_9, d_29, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_182
  • loc_en_CA, sid_00275686, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store