STEPDRILL BIT

Article #0244132 Model #10234 Format3/[email protected]/8X1/16"
STEPDRILL BIT
 

Description

High speed steel 3/8-in. shank, drills many hole diameters.

Technical specifications

You may also like

MAKITA
Driver Bits and Sockets Set - 38 Pieces
Format ST37
Article #11975372
Model #T-03078
★★★★★ ★★★★★
0
(0)
MAKITA
Short Spade Bit Kit - 8/Pieces
Format 8PC
Article #11975426
Model #T-02973
★★★★★ ★★★★★
0
(0)
MAKITA
Drill Bit Kit - Round Shank - 1/16" to 1/2" - 18 Bits
Format 18PC
Article #11975427
Model #T-03006
★★★★★ ★★★★★
0
(0)
MAKITA
84-Pc Impact Driver Accessory Kit
Format 84PC
Article #11975247
Model #M-00147
★★★★★ ★★★★★
3.3
(4)
MAKITA
Auger Bit Set - 6 Pieces
Format ST6
Article #11975371
Model #T-02989
★★★★★ ★★★★★
0
(0)
MAKITA
Drilling and Driving Bit Set - 71-Pieces
Format 71PC
Article #11975353
Model #B-50273
★★★★★ ★★★★★
0
(0)
MAKITA
Drill-Driver Bit Set - 70 pieces - Oxyde/Titanium
Format 70PC
Article #11975358
Model #T-01725
★★★★★ ★★★★★
0
(0)
BOSCH
Glass and Tile Drill Bit - 1/4"
Format 1/4"
Article #19835551
Model #GT300
★★★★★ ★★★★★
2.3
(6)
DEWALT
DeWALT Screwdriver Bit Set - 37-Piece
Format ST/37
Article #0794509
Model #DW2173
★★★★★ ★★★★★
4.1
(11)
DEWALT
Drill Bit Set - DeWalt - 13 Pieces -
Format 13PC
Article #00275548
Model #DW1163
★★★★★ ★★★★★
5
(3)
EAB Tool (2-Piece) Colored Bit Clip Industrial Screwdriver Bit - 2" SQ #2 - Recyclable - 10/Pack
Format #2x2"x10PC
Article #34595588
Model #96032
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Masonry Drill Bit - 3/16" x 6" - Carbon Steel
Format 3/16x6"
Article #19836320
Model #LBHX003
★★★★★ ★★★★★
5
(4)
EXCHANGE-A-BLADE
EAB Tool Colored Bit Industrial Screwdriver Bit - 2" SQ #2 - Recyclable
Format #2x2"
Article #34595562
Model #83239
★★★★★ ★★★★★
0
(0)
EAB Tool 2" Colored Industrial Screwdriver Bit Clip - Recyclable - Assorted - 10/Pack
Format 2"x10PC
Article #34595589
Model #96042
★★★★★ ★★★★★
0
(0)
EXCHANGE-A-BLADE
EAB Tool Colored Bit Industrial Screwdriver Bit - 4" SQ #2 - Recyclable
Format #2x4"
Article #34595558
Model #83226
★★★★★ ★★★★★
0
(0)
BOSCH
Drill Bit for Glass and Tile - 5/16''
Format 5/16"
Article #19835552
Model #GT400
★★★★★ ★★★★★
0
(0)
CRAFTSMAN
Set of 14 Metal Drill Bits - Gold-Coated Black Oxide
Format 14PC
Article #00276913
Model #CMAM2214
★★★★★ ★★★★★
4.5
(80)
BOSCH
Bosch Masonry Drill Bit - 5/32" x 6" - Carbon Steel
Format 5/32x6"
Article #19836319
Model #LBHX002
★★★★★ ★★★★★
3
(2)
EXCHANGE-A-BLADE
EAB Tool Assorted Impact Nutsetter Bit Clip Industrial - Recyclable - 2" - 5/Pack
Format 2"x5PC
Article #09325002
Model #98095
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Masonry Drill Bit - 5/16" x 6" - Carbon Steel
Format 5/16x6"
Article #19836322
Model #LBHX006
★★★★★ ★★★★★
4.5
(14)
BOSCH
Bosch Masonry Drill Bit - 1/4" x 6" - Carbon Steel
Format 1/4x6"
Article #19836321
Model #LBHX004
★★★★★ ★★★★★
3.2
(5)
BOSCH
Bosch Masonry Drill Bit - 1/2" x 6" - Carbon Steel
Format 1/2x6"
Article #19836324
Model #LBHX010
★★★★★ ★★★★★
4.4
(22)
BOSCH
CONCRETE DRILL BIT
Format 5/32x6"
Article #1983025
Model #HC2001
★★★★★ ★★★★★
3.5
(16)
BOSCH
Bosch Masonry Drill Bit - 3/8" x 6" - Carbon Steel
Format 3/8x6"
Article #19836323
Model #LBHX008
★★★★★ ★★★★★
4.3
(33)
EXCHANGE-A-BLADE
EAB Tool Colored Bit Industrial Screwdriver Bit - 2 3/4" SQ #2 - Recyclable
Format #2x2 3/4"
Article #34595564
Model #83247
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
STEPDRILL BIT is rated 4.6 out of 5 by 28.
Rated 5 out of 5 by from Far superior product than I expected! I had originally bought a similar sized step drill from Harbor Freight (HF) tools to do some work on a my car trailer. After using the step drill from HF, it lasted exactly one second after it snapped off at the stem in the chuck of my drill. The Irwin product is by far a superior product and is built to last. The shaft on the Irwin step drill is fairly large and beefy compared to the HF brand. It easily plowed through the steel I was working on. The cost was a lot more than I normally pay, but I am a firm believer that you get what you pay for and the Irwin step drill is a product that I would recommend.
Date published: 2012-09-12
Rated 5 out of 5 by from Worked just fine [This review was collected as part of a promotion.] I used it to drill some 5/8" holes to add wheels to a project I was working on. I already had the holes drilled out to 3/8 of an inch, but I needed either a 1/2" drill, or bigger bits with a 3/8" shank. A friend recommended a step bit. I had seen them before, but never knew what they were. Well I must say that I need to be more observant and ask more questions. Went from a 3/8" hole to 5/8" in a matter of seconds. No changing bits. Wish I had one of these all along. Now to find out how to keep it sharp.
Date published: 2018-11-14
Rated 5 out of 5 by from Made short work of a problem I have a 15 year old mini-tiller and I needed to replace the fuel lines. There is a grommet in the plastic fuel tank through which the fuel hoses - supply, return, vent - pass and the grommet fits into a hole in the fuel tank. I ordered the parts elsewhere, Lowes does not carry this assembly. Amazingly the manufacturer decided that the diameter of the grommet needed to increase about 3/16". I pondered ordering a new fuel tank with the larger grommet hole or buying a step bit to enlarge the existing hole. The price of a new tank is comparable to the price of this bit and I could wait a week or two for the new tank to arrive. No-brainer to buy the step bit. The bit increased the hole size in seconds and I was in business. The tool is excellent for cutting holes in plastic.
Date published: 2016-04-21
Rated 5 out of 5 by from The perfect tool for the job I needed to enlarge 2 drain holes in the bed of my truck. I needed it to be clean and precise. This was the correct tool to use. I was really unsure about what it would take to do the job right. But, this bit in a pneumatic drill made the job easy. I initially though it was expensive. But, I cannot think of any other tool that would have done the job as well.
Date published: 2016-09-25
Rated 5 out of 5 by from Awesome tool [This review was collected as part of a promotion.] Bought this to step up holes for a wiring harness in a trailers crossmembers. Snapped three drill bits in one crossmember went out bought this tool and drilled out the holes in 10 crossmembers no issues.
Date published: 2019-05-09
Rated 4 out of 5 by from Irwin Step Drill Bit This is the first time that I bought a bit of better quality. Compared to the one's I get from (H.F.) there's no comparison. It's better to pay a little more and not break,burn or wander,and save time and get better results with this product.
Date published: 2021-01-13
Rated 5 out of 5 by from Great way to enlarge hole [This review was collected as part of a promotion.] Used on 3/16 mild steel to increase a 1/2" hole to 3/4". used a drill press and it was an effortless job. took less than a minute. No trouble in mild steel.
Date published: 2018-11-13
Rated 5 out of 5 by from Well made [This review was collected as part of a promotion.] Strong and durable. I like the incremental marks which help a lot, although I need my glasses.
Date published: 2019-06-06
  • y_2021, m_6, d_17, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_en_CA, sid_0244132, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store