Tape - Automatic Heating Tape

Article#0356028 Model#AHB118 Format126WX18'
Tape - Automatic Heating Tape
 

Description

Tape.

You may also like

WARMLYYOURS
WarmlyYours Silver Installation Kit
Article #330608891
Model #FHT-KIT-02-SLV
★★★★★ ★★★★★
0
(0)
WARMLYYOURS
WarmlyYours Snow Melt Cable - 240 V - 342 ft. - 16.7 A
Article #330608906
Model #WHCA-240-0342
★★★★★ ★★★★★
0
(0)
WARMLYYOURS
WarmlyYours Value Snow Melt Control - 100-240 VAC
Article #330608894
Model #SCV-DUAL
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Heating Cable for Ditra-Heat Membrane - 248.2' - 240 V
Format 248.2'-240V
Article #42815020
Model #DHEHK24075
★★★★★ ★★★★★
0
(0)
WARMLYYOURS
WarmlyYours Snow Melt Timer Control
Article #330608895
Model #SCM-120
★★★★★ ★★★★★
0
(0)
STELPRO
Stelpro Heating Cable - Polymer - 35.3' - 135 W - 240 V
Format 35.3'-135W-240V
Article #03915256
Model #SCU2W0135S013
★★★★★ ★★★★★
0
(0)
STELPRO
Floor Heating Cable - 176.3' - 675 W - 240 V - White
Format 176.3'-675W-240V
Article #03915263
Model #SCU2W0675S058
★★★★★ ★★★★★
0
(0)
WARMLYYOURS
WarmlyYours Snow Melt Cable - 240 V - 251 ft. - 12.5 A
Article #330608907
Model #WHCA-240-0251
★★★★★ ★★★★★
0
(0)
SCHLUTER SYSTEMS
Heating Cable for Ditra-Heat Membrane - 124.1' - 240 V
Format 124.1'-240V
Article #42815016
Model #DHEHK24038
★★★★★ ★★★★★
0
(0)
WARMLYYOURS
WarmlyYours Snow Melt Cable - 240 V - 128 ft. - 6.3 A
Article #330608910
Model #WHCA-240-0128
★★★★★ ★★★★★
0
(0)
WARMLYYOURS
WarmlyYours Medium Relay Panel, (4x) 2-Pole
Article #330608900
Model #RLY-8PL
★★★★★ ★★★★★
0
(0)
WARMLYYOURS
WarmlyYours Snow and Ice Melting Control Premium
Article #330608896
Model #SCP-120
★★★★★ ★★★★★
0
(0)
EASYHEAT
Tape - Automatic Heating Tape
Format 42WX6'
Article #0356025
Model #AHB016A
★★★★★ ★★★★★
0
(0)
STELPRO
Stelpro Heating Cable - Polymer - 53.1' - 203 W - 240 V
Format 53.1'-203W-240V
Article #03915257
Model #SCU2W0203S019
★★★★★ ★★★★★
0
(0)
EASYHEAT
Tape - Automatic Heating Tape
Format 420WX60'
Article #0356033
Model #AHB160
★★★★★ ★★★★★
0
(0)
WARMLYYOURS
WarmlyYours Platinum Install Kit
Article #330608887
Model #FHT-KIT-04-PLT
★★★★★ ★★★★★
0
(0)

Technical specifications

Can the heat line be installed inside the water line, NOT on the outside of the water line?

Asked by: lbcowan
No.
Answered by: SomnabulantMaven
Date published: 2018-12-30

I am running two plastic pipes, one hot and one cold water, from inside my home to an out side building with on demand heat only. Can I tape the 2 pipes with the sensor cable together with the heat sensor  on one of the pipes? please advise

Asked by: Henning
No they need to be independently heat traced and insulated so the heat trace can regulate the temperature better
Answered by: Sparky89
Date published: 2018-10-19

After I install the heat tape, can I wrap the pipes and tape with pipe foam insulation? What is the recommended kind of pipe insulation, foam or fiberglass? (to avoid the risk of fire)

Asked by: JackieSh
we found that there was no reason to wrap the pipes after installation of the heating cable,....but the should be no difference if insulation were to be used.....would recommend the foam....
Answered by: stonehead
Date published: 2019-01-28

what if is not straight

Asked by: josewales
- cable bends / conforms to pipe, ...attach with plastic ties.
Answered by: stonehead
Date published: 2018-03-16

I been doing a little research into what I can purchase to keep a outdoor 100lb propane tank warm as the cold drop the last few days are causing pressure issues and I wanna know if these would work or if there is something else recommend for that purpose?

Asked by: Austin101

I am wanting to run plastic pipe water line from my cottage to my garage above ground. The length is 75 feet. Do i just attach the heat trace to the pipe and let the pipe sit on the ground? Or does it have to be covered?

Asked by: Lake water

Package indicates the item should only be used on water pipes. I wish to use the item in 3 ft and 6 ft long aluminum 3" x 3" down spout extensions sloped on a 20 degree angle below horizontal and fed from a  GFI. Can I do so?

Asked by: ppdave

can this be used on pvc or pex pipe

Asked by: GarryW
  • y_2020, m_2, d_24, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_CA, sid_0356028, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Tape - Automatic Heating Tape is rated 3.3 out of 5 by 4.
Rated 4 out of 5 by from Freeze Saver This is still new to me so I may update later. The recent extended freeze in San Diego (I'm at 1700 feet) caused my well pump pressure switch to freeze up. I purchased this 18' heat cable and a 6' cable for an exposed filter assembly. Such products are hard to find in San Diego area, but the Escondido store had quite a few in several different lengths (Plumbing department item). They were easy to install and have proven very effective- weather has been colder than when it initially froze up, yet I have not had a repeat of the problem. You'll need a local 110VAC outlet, and suitable high-temp electrical tape or insulation wrap, which are not supplied with the cable. Installation was straightforward and simple. Instructions are generally above average. These appear to be made in Mexico, rather than China, and at least outwardly appear to be of good materials, fit, and finish. We'll see how the cables perform over coming days and update if necessary.
Date published: 2013-01-14
Rated 4 out of 5 by from If it works in Canada - it'll work anywhere! We live in Alberta, Canada and our winters can fall to below -50 degrees Celsius and colder with the windchill. Hasn't been quite that cold yet this year but our water froze up on Christmas Eve and it turned out that our original Easy Heat tape had been chewed through by some type of critter. We replaced it, and within an hour we had glorious running water again! I will say that the one issue I have with these is that the indicator light on the cord does not shut off when there is damage to the cord. We assumed the heat tape was fine because the indicator light was still on - don't rely on this! We had to manually feel the pipe under the insulation to find that it was frozen solid.
Date published: 2016-12-28
Rated 1 out of 5 by from Easy Heat = Junk This was installed by a professional jobber on my main water inlet. It lasted two months and then failed on Christmas Day, causing my water line to freeze solid. On boxing day I bought an identical replacement, which then failed again as soon as I plugged it in. Easy Heat cables have serious quality issues and will fail when you need them most. Real quality cables from Raychem or Thermon cost quite a bit more but will actually last years, not days. Please save yourself endless grief and avoid Easy Heat cables.
Date published: 2016-09-14
Rated 4 out of 5 by from Product does what it is supposed to do....simple to install.
Date published: 2018-02-14
  • y_2020, m_2, d_24, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_CA, sid_0356028, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store