Telescoping LED Lighted Inspection Mirror

Article#01215299 Model#80560 Format360DG 12 1/4-33"
Telescoping LED Lighted Inspection Mirror
 

Description

The General black telescoping LED lighted inspection mirror features a shatter resistant fully polished glass mirror, two extra bright LED lights and a telescopic handle extending from 12 1/4'' up to 33''. A 36° swivel double ball joint connects the mirror to the shaft. Batteries included. 1-year warranty against manufacturing defects.

Technical specifications

You may also like

FULLER
Locking Measuring Tape - Plastic/Rubber - SAE/Metric - 25'
Format 1"x25'
Article #70155073
Model #750-0030
★★★★★ ★★★★★
0
(0)
FULLER
Level set
Format 3PC
Article #01215278
Model #40-5711
★★★★★ ★★★★★
0
(0)
BOSCH
Cross-Line Laser - Self-Leveling - 30' - Light Blue
Article #19836286
Model #GLL25-10
★★★★★ ★★★★★
3.8
(34)
BOSCH
Laser Measuring Tool - 100 ft
Format 100'
Article #19835799
Model #GLM 30
★★★★★ ★★★★★
4.4
(42)
BOSCH
GLL30 Self-Leveling Cross-Line Laser Measure - 30'
Format 30'
Article #19836143
Model #GLL 30
★★★★★ ★★★★★
4
(50)
BOSCH
Self-Levelling Cross-Line Laser with Mounting Device - 40'
Format 40'
Article #19836291
Model #GLL40-20G
★★★★★ ★★★★★
4.2
(13)
BOSCH
Distance Measuring Laser - BLAZER GLM20 - 65' Range
Format 0-65'
Article #19835938
Model #GLM20
★★★★★ ★★★★★
4.8
(4)
BOSCH
Bosch Digital Multi Scanner - 9 V - Blue and Black
Format 9V
Article #19835505
Model #GMS120
★★★★★ ★★★★★
2.5
(2)
BOSCH
GLM42 Compact Laser Measure - 135'
Format 135'
Article #19836179
Model #GLM 42
★★★★★ ★★★★★
4.5
(38)
BOSCH
GLL100 GX Self-Leveling Cross-Line Laser - 100'
Format 100'
Article #19836180
Model #GLL 100 GX
★★★★★ ★★★★★
4.5
(11)
BOSCH
Laser Measuring Tool - 35' Scope
Format 35'
Article #19835970
Model #GLM10X
★★★★★ ★★★★★
5
(2)
BOSCH
Laser Level and Square
Article #19835434
Model #GTL2
★★★★★ ★★★★★
3
(2)
BOSCH
Self-Leveling Cross-line Laser Level - 40' range
Format 40'
Article #19836269
Model #GCL2-55
★★★★★ ★★★★★
4.4
(21)
BOSCH
Green Laser Level - 200'/360° - 12 V - Bluetooth
Format 12Vx200'x360DG
Article #19836278
Model #GLL3-330CG
★★★★★ ★★★★★
3
(2)
BOSCH
Combination Point and Line Laser Level
Article #19835765
Model #GLL 1P
★★★★★ ★★★★★
4
(1)
BOSCH
GLL3-15 Self-Leveling Three-Line Laser Measure - 50'
Format 50'
Article #19836072
Model #GLL 3-15
★★★★★ ★★★★★
4.1
(20)
BOSCH
5-Point Self-Leveling Alignment Laser - 100'
Article #19835427
Model #GPL 5 R
★★★★★ ★★★★★
4.1
(10)
FULLER
Ogee Cut Adapter
Article #01215203
Model #320-1755
★★★★★ ★★★★★
0
(0)
BOSCH
Red Laser Level - 200' - Three 360° Planes
Format 200'x360DG
Article #19836277
Model #GLL3-300
★★★★★ ★★★★★
5
(4)
BOSCH
Laser Distance Measurer - 165'
Format 165'
Article #19835926
Model #GLM50C
★★★★★ ★★★★★
0
(0)
BOSCH
2-Point Self-Leveling Laser Level - 30'
Format 30'
Article #19835423
Model #GPL2
★★★★★ ★★★★★
4.7
(3)
BOSCH
Tile and Square Layout Laser - 65'
Article #19835443
Model #GTL3
★★★★★ ★★★★★
5
(1)
BOSCH
GLL2-20 Self-Leveling 360° Cross-Line Laser Measure - 65'
Format 360DG
Article #19836074
Model #GLL 2-20
★★★★★ ★★★★★
4.7
(20)
BOSCH
GLM10 Laser Measure - 35'
Format 35'
Article #19836187
Model #GLM 10
★★★★★ ★★★★★
5
(2)
BOSCH
Bosch 360⁰ Three-Plane Leveling and Alignment-Line Laser
Article #330609784
Model #GLL3-300
★★★★★ ★★★★★
5
(4)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Telescoping LED Lighted Inspection Mirror is rated 3.4 out of 5 by 17.
Rated 3 out of 5 by from ok after you fix it I found the backing plate over the batteries isn't tight enough to contact the batteries, it worked if you squeeze the plate tight. It has little clip feet on one side and a screw un the door to open it. I had to shimmy the cover with tin foil and it works fine. The on and off slider doesn't click into place so you really have to slide it all the way over
Date published: 2015-02-28
Rated 4 out of 5 by from Usable, but instructions suck The one I bought today works fine, but installing the batteries is tricky and not covered on the card in the package. You need to know that the + (positive) terminal of coin batteries, like the included pair of CR2032, is the shell that wraps around the sides. The smaller disk on top is the - (negative) terminal. After the batteries are in place, the cover needs to be put in place and held down securely with one thumb while you insert and tighten the locking screw with the other hand. Be sure to gently start the screw into the original threads. Otherwise the screw will try to cut new threads in the plastic and will gouge out the hole, making it impossible to tighten the screw. The slide switch on mine locks securely in both the ON and OFF positions. Deducted one star for incomplete instructions.
Date published: 2017-05-24
Rated 1 out of 5 by from Not worth the trip to store Got mirror home, tried to place batteries in, they would not stay in place when trying to close lid, once finally managed to get them in place, the lid stuck up and no longer sat flush, and light did not work, tried new batteries same thing, light did not work. Will be returning tomorrow.
Date published: 2015-12-28
Rated 2 out of 5 by from Nice Idea, but... The extension is too short. It is only useful for places you may not be able to get a hand into. But nothing more than a foot or so. Also, the LED lights interfere with your own vision as much as they may illuminate the space you are trying to see. I had to shine a flashlight through the mirror to effectively inspect, rather than using the LEDs. I bought this to avoid having to use two hands.
Date published: 2018-03-27
Rated 5 out of 5 by from very handy tool ok, i have only used a few times, but when i did it was great. This is not made for "rugged" duty, but you can sure see better in tight spots since this adjusts to any angle and lights up the area. It saved me much grief when running wires in an attic.
Date published: 2017-02-06
Rated 4 out of 5 by from useful Works well. Plastic seems a little chintzy, but time will tell.
Date published: 2014-10-07
Rated 1 out of 5 by from False Advertising Packaging states mirror is 2" by 3", that is the mirror plus housing. The actual size of the mirror is 1-1/2" x 2-1/2". Website states it extends to 26-1/5 inches. Packaging states the extends to 22-3/4 inches. One would assume that is how far the stem extends, but it is not. They are measuring from the tip of the extended mirror head to the end of the handle. Returning.
Date published: 2017-10-12
Rated 5 out of 5 by from I can see! Bought this light to see the back and underside of brazed joints in copper pipe. The built in light makes it very easy to identify missed areas of the braze without having to use a separate flashlight. Worth the money.
Date published: 2017-08-15
  • y_2020, m_6, d_5, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_CA, sid_01215299, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store