Halloween DecorInflatable DecorationsLighting and Special EffectsIndoor DecorationsOutdoor Decorations

Titanium Drill Bit - Impact Ready - 1/4"

Article#00275985 Model#DD5116 Format1/4"
Titanium Drill Bit - Impact Ready - 1/4"
 

Description

With its one-piece solid core, this DEWALT Impact Ready(R) titanium drill bit is five times more durable than 2-piece drill bits. The titanium drill bit offers superior drilling performance in metal, wood and plastic to help you tackle a wide range of projects. It has a patented web taper that helps to increase bit strength for durable and lasting use. With its Pilot Point(R) tip that starts up on contact and reduces walking, the bit offers speedy performance in creating clear, burr-free holes accurately and with reduced lock-up on breakthrough.

You may also like

BOSCH
Bosch Masonry Drill Bits - 5/32" x 6" - Carbon Steel - 5/Pack
Format 5/32x6"x5PC
Article #19836325
Model #LBHX0025
★★★★★ ★★★★★
5
(1)
VERMONT AMERICAN
High-Speed Standard Fractional Drill Bit - 5/16"
Format 5/16x4 1/2"xCR1
Article #1354675
Model #10220
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Masonry Drill Bits - 3/16" x 6" - Carbon Steel - 5/Pack
Format 3/16x6"x5PC
Article #19836326
Model #LBHX0035
★★★★★ ★★★★★
5
(6)
BOSCH
CONCRETE DRILL BIT
Format 3/8x6"
Article #13545479
Model #HCBG12
★★★★★ ★★★★★
1
(1)
VERMONT AMERICAN
Square Drive Socket Adaptor - 3/8"
Format 3/8x2"xCR1
Article #1354641
Model #15475
★★★★★ ★★★★★
0
(0)
VERMONT AMERICAN
High-Speed Standard Fractional Drill Bit - 3/8"
Format 3/8x5"xCR1
Article #1354676
Model #10224
★★★★★ ★★★★★
0
(0)
BOSCH
CONCRETE DRILL BIT
Format 3/8x12"
Article #13545481
Model #HCBG14
★★★★★ ★★★★★
0
(0)
VERMONT AMERICAN
High-Speed Standard Fractional Drill Bit - 9/64"
Format 9/64x2 7/8"xCR1
Article #1354666
Model #10209
★★★★★ ★★★★★
0
(0)
VERMONT AMERICAN
High-Speed Reduced Shank Drill Bit - 13/32"
Format 13/32x5 1/4"xCR1
Article #1354677
Model #10482
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Masonry Drill Bits - 1/4" x 6" - Carbon Steel - 5/Pack
Format 1/4x6"x5PC
Article #19836327
Model #LBHX0045
★★★★★ ★★★★★
5
(4)
BOSCH
Square Insert Bit
Format #3x3"
Article #19835355
Model #SQ3301
★★★★★ ★★★★★
0
(0)
VERMONT AMERICAN
"Extra-Hard" Square Insert Bit - #3 -1"- 2-Pack
Format #3x1"xCR2
Article #1354177
Model #15340
★★★★★ ★★★★★
0
(0)
BOSCH
CONCRETE DRILL BIT
Format 7/16x6"
Article #13545482
Model #HCBG15
★★★★★ ★★★★★
0
(0)
AMERICAN TOOL
STEPDRILL BIT
Format 3/[email protected]/8X1/16"
Article #0244132
Model #10234
★★★★★ ★★★★★
4.7
(21)
DEWALT
DeWalt Masonry Bit - Carbide - SDS Plus 2 - 3/4" x 10"
Format 3/4x10x12
Article #00275090
Model #DW5455
★★★★★ ★★★★★
0
(0)
QUIK DRIVE
Flooring Screws - #7 - 1 1/4" -1000 Box
Format #7x1 1/4"xBX1000
Article #3919019
Model #HCKMTH114S
★★★★★ ★★★★★
0
(0)

Technical specifications

Component :Heavy-duty solid core metal Type :Titanium drill bit Model :Impact Ready(R) Color :Gold Utilization :Ideal for metal, wood, and plastic Diameter :1/4" (6.35 mm) Quantity per Box :1 drill bit Shafts :1/4" (6.35 mm) hex shank Number of Pieces :1 drill bit Packaging :Each
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Titanium Drill Bit - Impact Ready - 1/4" is rated 4.8 out of 5 by 16.
Rated 4 out of 5 by from Good Quality Bosch Bit with a stepped tip This is a short bit for use with a hex driver or impact driver. I used this to drill mild steel plate. The short length does limit the depth to which you can drill. I needed the hex driver to work with an extension to work around a motor of an existing assembly. Since the steel plate was comparatively thin ~1/8" the bit length was not of material importance to me. The bit was sharp and cut aggressively. This drill has a stepped pilot diameter and is easy to hold to a spot. At the end of the 4 holes I drilled the bit did not appear to be materially dulled. While the bit is not titanium coated the basic hardness and durability of the drill bit seems quite good.
Date published: 2014-12-01
Rated 5 out of 5 by from Worked beautifully with Dewalt 90 degree I had to fasten a 8 foot Barn Door railing for my utility room in my basement but had only 5-1/2" space between metal ducting and the wooden beam. The hole to be drilled was 2" deep x 1/4". I looked everywhere including 90 degree drills but with the drill bit inserted it was too big. The answer came in the form of Dewalt 90 degree drill attachment DWARA100 (Impact Ready) and this 1/4" Dewalt Titanium Twist drill with hex base. This drill bit is overall 3-3/16" long from tip to base and 3/4" of it fits into the DWARA 100 socket. All together the drill bit and DWARA 100 came to 4/1/2" long, so I even had 1" space extra to work in. This bit ate through the house wooden beam like butter and made a clean 1/4" hole, just perfect for the 3/8" lag bolt. Couldn't have done it without the two combination.
Date published: 2018-04-25
Rated 4 out of 5 by from Great bit A great bit for metal. It has a pilot bore to help center the hole. The twist on the wrist doesn't exist because of the well designed beveled edge. The hex head gives it a good grip and eliminates slippage in the drill [This review was collected as part of a promotion.]
Date published: 2019-04-08
Rated 5 out of 5 by from 1/4" Drill bit The Dewalt 1/4" Titanium drill bit was just what I needed on a recent project. Stayed sharp, drilled clean holes and followed the center punch hole well. This drill bit should be good for many more projects. [This review was collected as part of a promotion.]
Date published: 2018-11-06
Rated 5 out of 5 by from I’m in construction and use these drill bits frequently. I use these bits for sheet metal and 1/8” metal. I have not been disappointed. I will continue to use these drill bits. [This review was collected as part of a promotion.]
Date published: 2018-11-26
Rated 5 out of 5 by from It drilled right through an old board and metal bar with ease. I was amazed how it cut through. I was replacing boards in a trailer bed which were rotten. [This review was collected as part of a promotion.]
Date published: 2019-07-29
Rated 4 out of 5 by from DEWALT 1/4-in Titanium Twist Drill Bit Needed a bit to drill 4, 1/4 inch holes into the legs of a cast iron table top smoker grill in order to bolt it to a table top. These bits were perfect. Easy to start each hole, bits were self tapping.
Date published: 2018-06-18
Rated 5 out of 5 by from It works! I needed to drill several holes in sheet steel. This bit did the work quickly with little heat buildup. And it is still sharp. [This review was collected as part of a promotion.]
Date published: 2019-09-30
  • y_2019, m_12, d_7, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_CA, sid_00275985, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store