Tool Adapter

Article#0591093 Model#906-87
Tool Adapter
 

Description

Universal tool adapter for Shop-Vac®. vacuums. Adapts hose to stationary or portable power tools.

Technical specifications

You may also like

BOSCH
Bosch 14-Gallon Dust Extractor with HEPA Filter
Article #330614109
Model #VAC140AH
★★★★★ ★★★★★
5
(1)
BOSCH
Bosch Flat Pleated Polyester Filter
Article #330009226
Model #VF110
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch 10 Ft. 35mm Diameter Dust Extractor Hose
Article #330609805
Model #VH1035
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Wet/Dry Dust Bag for 9 amd 14-Gallon Dust Extractors
Article #330009228
Model #VB090S
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Anti-Static 16.4 Ft. Dust Extractor Hose
Article #330609806
Model #VH1622A
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Flat Pleated Paper Filter
Article #330009229
Model #VF100
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch 9.85 Ft. Dust Extractor Hose
Article #330609807
Model #VH1022
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Paper Dust Bag for 14-Gallon Dust Extractors - 5 PK
Article #330009230
Model #VB140
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Plastic Dust Bag for 9- or 14-Gallon Dust Extractors
Article #330009231
Model #VB000P
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch 16.4 Ft. 35 mm Diameter Dust Extractor Hose
Article #330609803
Model #VH1635
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Anti-Static 16.4 Ft. Dust Extractor Hose
Article #330609804
Model #VH1635A
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Fleece Dust Bag for 14 Gal. Dust Extractors - 5PK
Article #330009227
Model #VB140F
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch Fleece Dust Bag for 9-Gallon Dust Extractors - 5 PK
Article #330009232
Model #VB090F
★★★★★ ★★★★★
0
(0)
BOSCH
Bosch 9-Gallon Dust Extractor with HEPA Filter
Article #330614108
Model #VAC090AH
★★★★★ ★★★★★
4.5
(2)
BOSCH
Bosch HEPA Filter for Dust Extractor
Article #330609668
Model #VF130H
★★★★★ ★★★★★
0
(0)
SHOP-VAC
Shop-Vac Disposable Filter Bag - 5 to 8 Gallons - 3-Pack
Format 5-8GxPK3
Article #0591126
Model #906-61
★★★★★ ★★★★★
4.8
(6)
SHOP-VAC
Disposable Filter Bag
Format PK/2X4 @ 6.5G
Article #0591091
Model #906-71
★★★★★ ★★★★★
4.6
(81)
DEWALT
Wet and Dry Vacuum - 5.0 HP - 10 Gallons
Format 10GAx5HP
Article #45585001
Model #DXV10S
★★★★★ ★★★★★
5
(1)
SHOP-VAC
Wet and Dry Vacuum 3.0HP - 6 gallons
Format 23Lx3.0HP
Article #05915127
Model #59827-82
★★★★★ ★★★★★
3
(3)
SHOP-VAC
Filter and Ring
Article #0591054
Model #901-07
★★★★★ ★★★★★
0
(0)
SHOP-VAC
Disposable Filter Bag
Format PK/[email protected]
Article #0591092
Model #906-72
★★★★★ ★★★★★
4.7
(87)
SHOP-VAC
Cartridge Filter
Article #0591095
Model #903-04
★★★★★ ★★★★★
4.7
(159)
SHOP-VAC
Disposable Collector Filter Bags
Format 10-14GAxPK3
Article #0591127
Model #906-62
★★★★★ ★★★★★
5
(4)
SHOP-VAC
Filter Sleeve
Article #0591026
Model #905-85
★★★★★ ★★★★★
3.7
(3)
SHOP-VAC
Portable "wet and dry" vacuum
Format 1.5GAx2.0HP
Article #05915106
Model #203-01
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Tool Adapter is rated 4.2 out of 5 by 49.
Rated 1 out of 5 by from doesnt work on vacuum port of saws Do not buy this if you intend for it to connect to the vacuum port of your miter saw, table saw, router table, etc. for dust collection. I have a dewalt table saw, delta miter saw, and bosch router table, and all are incompatible with this adapter. Youre better off finding the right sized adapter for your aplication or trying to fabricate something from PVC to fit your existing shopvac hose.
Date published: 2018-02-19
Rated 2 out of 5 by from Adapter for shopvac accessory tools Well its a great idea to have as many tools as one can have for their Shop Vac for various applications and jobs. The reason I gave this a low rating is it puts to much strain upon the motor. Its funneled down to small, even when it not touching the floor and just sucking air the motor winds up tight its almost like a clog...Not good, I come from a long line of vacuum sweeper salesmen, my father in particular and learned the repair business from him. make an adapter the same size as the hose and a good floor nozzle for tile and hardwood, I'll give you this one back and buy the new one. [This review was collected as part of a promotion.]
Date published: 2018-09-23
Rated 5 out of 5 by from Need to attach something? I attach a piece of PVC pipe to my shop vac so I can clean my great room ceiling. I put a P-trap on the end of the pipe to clean my gutters (but this only works if the contents are somewhat dry) I have an elbow attachment so I can put the vac outside and use my hose in the house or garage, without the noise. I did have to cut the device at the correct shoulder and fit it into a coupler using hot water, so it took a bit of effort initially. I
Date published: 2011-09-25
Rated 1 out of 5 by from don't waste your time I wasted time getting one of these. I tried different ones Nothing fit. Problem solved: I recycled an empty plastic pill container. The neck fit into the opening on the sander. (If it is a little large the plastic threads can be sanded down) I cut a hole in the bottom with a 1 inch spade drill bit and cut 4 radial cuts with a jigsaw (like a sun burst) The end of the vacuum goes in easily.
Date published: 2014-06-19
Rated 5 out of 5 by from Versatile tool I purchased this fitting for my shop vac to enable me to add an extension of PVC pipe. This way I could reach across a patio roof by standing on a stepladder below. It adapts well to different sizes and doesn’t require permanent attachment to stay together! [This review was collected as part of a promotion.]
Date published: 2019-10-07
Rated 4 out of 5 by from Shop Vac Adapter The adapter did not come with instructions. I had to figure out to cut off the unwanted sections of the reducer, and the other end didn't fit the port on my band saw because the outer ring was the same size as the port. Am I supposed to cut off the outer ring? [This review was collected as part of a promotion.]
Date published: 2018-12-29
Rated 1 out of 5 by from The measurements are not accurate! I bought this product to adapt a vac attachment to my wand. I needed something to convert 1 1/4 to 1 1/2 which this product should do using the external measurement of 1 1/4 and the internal 1 1/2. That is IF it had a 1 1/2 step interior as it claims. It actually measured 2 so the wand just falls out.
Date published: 2011-09-27
Rated 1 out of 5 by from Bill the engineer The fitting size is not right. It DOES NOT fit the 1.5 inch at all.
Date published: 2015-06-24
  • y_2020, m_5, d_28, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_49
  • loc_en_CA, sid_0591093, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store