Touch'N Foam System 600 2-Component Spray Foam Sealant Kit - Low GWP

Article #76795025 Model #7565029600 Format88.03LB 2BX
Touch'N Foam System 600 2-Component Spray Foam Sealant Kit - Low GWP
 

Description

Touch'N Foam professional 2-component spray foam kits provide quick and simple solutions to air sealing projects in residential and commercial buildings. Simply "point, spray and watch" as the foam expands to create an air-tight seal that will not shrink, compress, settle or biodegrade. Foam expansion acts in less 60 seconds and helps you save up to 28% on your energy bill. This closed-cell foam is designed to resist moisture penetration, protecting against mould and mildew. Easy to use, the pro system 600 kit is great for larger projects where higher yield provides greater economy, yielding up to 600 board feet of coverage.

  • Air-seals in less than 60 seconds to help save up to 28% on your energy bill
  • Yields up to 600 board feet of coverage
  • CCMC listed for bead applied air sealant, Class 1 fire resistance
  • Closed cell foam resists moisture that can lead to mould and mildew

Technical specifications

Dispenser Type :Spray gun Dry Color :Cream ENERGY STAR Certified :No Fire Resistant :Yes Fits 2 x 4 Walls :No Fits 2 x 6 Walls :No For Use in Attics :Yes For Use in Basements :Yes For Use in Ceilings :Yes For Use in Crawlspaces :Yes For Use in Doors :Yes For Use in Duct :Yes For Use in Electrical :No For Use in Floors :No For Use in Garage Doors :No For Use in Masonry :No For Use in Plumbing :No For Use in Vents :Yes For Use in Walls :Yes For Use in Windows :Yes For Use on Glass :No For Use on Metal :Yes For Use on Plastic :No For Use on Wood :Yes Formaldehyde Free :No Insulation Type :Closed cell Maximum R-Value :5.4 Mold Resistant :Yes Net Contents(g) :36287.36 Net Contents(oz.) :1280 Paintable/Stainable :Paintable R-Value per Inch :5.4 Sound Barrier :No Series Name :Spray Foam Type :Kit Use Location :Indoor/Outdoor Vapor Retardant :No Warranty :Limited lifetime Water Resistant :Yes Dry Time :1-minute For Use on Insulation :Yes

You may also like

FROTH-PAK
Froth-Pak GWP 200 18.9 kg 2-Component Low Pressure Polyurethane Spray Foam Sealant
Article #56495032
Model #12031869
★★★★★ ★★★★★
2
(3)
FROTH-PAK
Froth-Pak GWP 620 2-Component Low Pressure Polyurethane Spray Foam Sealant
Article #56495033
Model #12031878
★★★★★ ★★★★★
3.7
(3)
GREAT STUFF
Great Stuff 12-oz Window and Door Yellow Spray Foam Insulation - Ready for Trim in 1 H
Format 12OZ
Article #56495028
Model #99108863
★★★★★ ★★★★★
4.8
(124)
GREAT STUFF
Great Stuff Polyurethane Expanding Foam Big Gap Filler Insulating Sealant Spray - Yellow - 20-oz
Format 568GR
Article #5649004
Model #157912
★★★★★ ★★★★★
5
(2)
GREAT STUFF
Great Stuff Pro Series Window and Door Insulating Polyurethane Expanding Foam - Paintable - 20-oz
Format 568GR
Article #5649016
Model #217025
★★★★★ ★★★★★
0
(0)
SIKA
Sika Boom 3XL 24-oz. Paintable/Sandable Polyurethane Foam for Large Cavity Filling
Format 690GR
Article #66145036
Model #654098
★★★★★ ★★★★★
5
(2)
SIKA
Sika Boom AS 24-oz. Polyurethane Foam - Paintable/Sandable
Format 690GR
Article #66145037
Model #513478
★★★★★ ★★★★★
2.3
(3)
SIKA
Sika Boom AS Polyurethane Foam - 12-oz. - Paintable/Sandable
Format 340GR
Article #66145039
Model #572714
★★★★★ ★★★★★
1
(1)
SIKA
Sika Boom AS Polyurethane Foam - 24-oz. - Paintable/Sandable
Format 690GR
Article #66145035
Model #513477
★★★★★ ★★★★★
0
(0)
LEPAGE
Tite Foam Insulating Foam for Gaps and Cracks - Polyurethane - 340-ml - White
Format 340GR
Article #01805234
Model #2092222
★★★★★ ★★★★★
4.5
(26)
ADFOAM
Adfast Ultimate Insulating Foam - 28.22-oz - For Doors and Windows - Applicator Included
Format 750ML-800GR
Article #13485002
Model #1815/750ML
★★★★★ ★★★★★
0
(0)
SIKA
Sika Boom 130-FB Polyurethane Fireblock - 16-oz. - Paintable/Sandable
Format 455GR
Article #66145034
Model #659858
★★★★★ ★★★★★
2
(2)
SIKA
Sika Boom Arctic Extreme Cold Polyurethane Foam - 860 g - Paintable/Sandable
Format 860GR
Article #66145038
Model #529377
★★★★★ ★★★★★
0
(0)
TOUCH 'N FOAM
DAP Touch 'n Foam Home Seal - Water Resistant Spray Insulation - Close Small Gaps and Cracks
Format 340GR
Article #3686004
Model #4001142412
★★★★★ ★★★★★
0
(0)
TOUCH 'N FOAM
DAP Touch 'n Foam Expanding Insulation Sealant - 20-oz - Fills Gaps and Blocks Insects
Format 567GR
Article #3686002
Model #4001130107
★★★★★ ★★★★★
0
(0)

Can you use this in a new house build? To replace regular insulation 

Asked by: Anna99999
Thank you for posting your inquiry. DAP Touch 'n Foam and similar low pressure closed cell spray polyurethane foams are only code approved for a maximum application thickness of 2", accordingly, it would not be practical/possible to achieve to achieve code required R-Values. Should you have any questions or require further assistance, please feel free to contact DAP’s Technical Customer Service Department at 888-327-8477.
Answered by: DAP Product Expert
Date published: 2023-05-01

Can I spray on a concrete block wall in the basement?

Asked by: Preng
Thank you for your inquiry and for your interest in the DAP Touch ‘n Foam products. This product can be applied to directly concrete, provided that it is fully cured (>28 days post pour). For best performance, the product should be applied within temperature application range, to clean, dry structurally sound surfaces. To be clear, this product can be used for interior below grade basement wall insulation, we do not recommend it for application to the exterior side/below grade basement wall insulation (direct soil/back fill contact). Please be advised that according to Canadian residential building code, low pressure two component spray foams can only be used for bead (not cavity/full surface coverage) application. Should you wish to discuss your intended project or have any additional questions, please feel free to reach out to DAP’s Technical Customer Service Department at 888-327-8477.
Answered by: DAP Product Expert
Date published: 2023-04-24

What type of filter do I use when using this product?

Asked by: G Sabean
Thank you for posting your inquiry on the DAP Touch ‘n Foam Pro System 600 Kit. As indicated in the “Safe Use, Storage and Handling FOR LOW-PRESSURE SPRAY FOAM PRODUCTS” information enclosed in the foam kit/box: “Section 5: Personal Protective Equipment (PPE): Spray polyurethane foam adhesives should always be used in a well-ventilated area. • Wear chemical resistant (e.g., nitrile) gloves, long sleeves and long pants to cover exposed skin. • Wear protective glasses or goggles.• Wear a NIOSH approved organic vapor air purifying respirator with a particulate filter if the exposure to pMDI is unknown or in doubt, especially when spraying where ventilation is limited such as in crawlspaces or where spraying close up. • See OSHA regulations 29 CFR 1910.134 for additional information regarding an approved respirator program which includes training, medical evaluation, fit testing. Respirator Options • Exposure limits to pMDI are set by three organizations. The Permissible Exposure Limit (PEL) is a mandatory limit set by OSHA for worker exposure. It is the maximum exposure allowable at any time during the work day, never to be exceeded. The PEL for pMDI is 20 parts per billion.• The American Conference of Governmental Industrial Hygienists (ACGIH) and the National Institute for Occupational Safety and Health (NIOSH) recommend the Time Weighted Average (TWA) exposure during an 8 hour day. The TWA is the maximum level of exposure day in and day out that a worker can be exposed to with minimal risk of adverse effects. The recommended maximum TWA for pMDI is 20 ppb. • While these exposure values represent the best current thinking of toxicologists and industrial hygienists, they offer no guarantee of absolute safety. Someone who is sensitized to pMDI may have an adverse effect with exposure below these guidelines. It is imperative that personnel working with polyurethane chemicals fully understand the hazards associated with their use and the controls and personal protective equipment (PPE) necessary to prevent exposure. Consult the SDS for more information regarding exposure limits, effects of over-exposure and recommended PPE. • While independent, 3rd party monitoring has demonstrated that air-borne concentration of pMDI vapors during application of low pressure spray foam in an unventilated space does not exceed exposure limits, the use of a NIOSH approved respirator is recommended. Some respirator options include: • Half-face air-purifying respirator (APR) with an organic vapor cartridge and a P100 particulate filter. The cartridges and filters must be changed at the end of each 8 hour shift. • Loose-fitting powered air purifying respirators (PAPR). A battery powered fan pulls air through filters and circulates air throughout the hood of the PAPR. Cartridges and filters must be changed periodically. • Self-contained breathing apparatus (SCBA). See OSHA regulations 29 CFR 1910.134 for additional information regarding an approved respirator program which includes training, medical evaluation, fit testing Glove Selection: The following gloves provide protection from pMDI exposure.• Disposable Light Duty nitrile gloves. • Butyl, Laminated polyethylene (PE) or ethylene vinyl acetate (EVA) laminated, or nitrile Medium Duty gloves. • Neoprene, PVC, or nitrile Heavy Duty gloves. Section 6: Re-Occupancy Time: • Occupants should vacate the home or building during application of spray polyurethane foam. • Based on 3rd party air sampling during and after application, DAP recommends a re-occupancy time of 1 hour after spray application is complete. • The cured foam may have a detectable odor immediately after spraying; however, there are no detectible chemical emissions. It is recommended that if this odor is offensive to the occupants, that the building be vacated for 24 hours.” Should you wish to discuss this with us or have any additional questions, please feel free to reach out to DAP’s Technical Customer Service Department at 888-327-8477.
Answered by: DAP Product Expert
Date published: 2023-04-21

Can I use this in the attic of an unheated garage . Would a vapour barrier be needed ....the ceiling is currently drywalled.

Asked by: Breezie
Thank you for your inquiry and for your interest in the DAP Touch ‘n Foam® Professional Low GWP Foam Kit 600 1.75 PCF FR CCMC. The inquiry that you have posted does not contain enough background or detail to allow us to provide a proper response in this format. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain this information from you, and to permit us to properly answer your question.
Answered by: DAP Product Expert
Date published: 2023-05-29

Can you use this in apartment building to divide two units. Does this let off toxic gases when exposed to fire?

Asked by: Hgddghfb
Thank you for your inquiry and for your interest in the DAP Touch ‘n Foam® Professional Low GWP Foam Kit 600 1.75 PCF FR CCMC. The inquiry that you have posted does not contain enough background or detail to allow us to provide a proper response in this format. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain this information from you, and to permit us to properly answer your question.
Answered by: DAP Product Expert
Date published: 2023-05-29

Can this spray foam be used under a raised cabin floor on piers for insulation/vapour barrier? Is it not to be exposed to the elements (underside of building)?

Asked by: fish_
Thank you for your inquiry and for your interest in the DAP Touch ‘n Foam products. The Touch ‘n Foam Pro System 600 Kit can be used for insulating the undercarriage of a structure with exposed framing. Because you will likely be spray encapsulating the mechanical systems of the structure (plumbing, electrical and HVAC), it would be strongly recommended to conduct a thorough inspection of these mechanical systems and address any concerns prior to the application of the foam, as access to these systems will be more difficult after the application of the foam. Please note that both one and two component spray polyurethane foams do not have good UV resistance and would need to be protected from sunlight exposure. Likewise, we would recommend that you contact your local building department to ensure that there are no additional requirements. Should you have any questions or require additional assistance, please feel free to contact DAP’s Technical Customer Service Department at 888-327-8477.
Answered by: DAP Product Expert
Date published: 2023-02-21

l ensenble de mousse touch n foan systeme 600 la valeur r est de combien par pouce

Asked by: alain o

Is this 2 boxes of the 600 spray foam or a total of 600 board ft? The picture looks like 2 but that could be the two chemicals.

Asked by: JamieAD
  • y_2024, m_4, d_18, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_CA, sid_76795025, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 3ms
  • QUESTIONS, PRODUCT
Touch'N Foam System 600 2-Component Spray Foam Sealant Kit - Low GWP is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Worked Very Well Sprayed the perimeter of the attic ontop of the vapor barrier and between trusses, about 2-3 feet around and 30x30ft. I followed my husband around with the tanks while he sprayed so he didn't have to stop much. Whenever you stop for 30sec, you'll need to replace the tip, so have all prep done before and a pocket of tips. We used 4 conical. I put a seed starter heat mat in each box around the tanks with a blanket cover them and let them warm up for about 8 hrs so the product was warm when we sprayed. The mats get to 75-85 degrees f. Box didn't have the wrench and Vaseline. Sprayed for an hour. Pressure from tanks to gun is greater at the start, and will lessen as the tanks get to empty. Would use again. Check the use by date on box.
Date published: 2022-10-10
  • y_2024, m_4, d_18, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_CA, sid_76795025, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 3ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store