Varnish - Polyurethane Varnish

Article #1449071 Model #300034444 Format946ML
Varnish - Polyurethane Varnish
 

Description

Polyurethane long lasting durable protection. Easy to use.

  • Provides long-lasting beauty and protection to any interior wood surface
  • Among the most durable coatings for wood protection
  • Ideal for woodwork, furniture, doors, cabinets and floors
  • Can be used on both finished and unfinished wood

Technical specifications

Warranty :None Use Location :Interior Base Material :Oil-based Clean-up Method :Mineral spirits Color/Finish Family :Clear Container Size :1-quart Number of Coats Recommended :2 Paint Color Family :Clear Sheen :Gloss Type :Polyurethane Unit of Measure :Fluid ounce(s) Unit of Measure Quantity :32

You may also like

MINWAX
Urethane Gloss Varnish
Format 3.78L
Article #14495282
Model #CM1321500
★★★★★ ★★★★★
0
(0)
VARATHANE
Professional Varnish
Format 946ML
Article #03305406
Model #248034
★★★★★ ★★★★★
5
(1)
MINWAX
Varnish
Format 946ML
Article #1449282
Model #42003M444
★★★★★ ★★★★★
4.3
(262)
FLECTO
Varnish - "Varathane" Professional Varnish
Format 946ML
Article #80455009
Model #Y110041
★★★★★ ★★★★★
3
(2)
VARATHANE
Professional Varnish
Format 946ML
Article #03305405
Model #248035
★★★★★ ★★★★★
0
(0)
FLECTO
Varnish - "Varathane" Professional Varnish
Format 946ML
Article #80455005
Model #Y100041
★★★★★ ★★★★★
3
(2)
SAMAN
Saman Interior Wood Varnish - Clear - Satin Sheen - Water-Based - 472 ml
Format 472ML
Article #7264038
Model #160-031
★★★★★ ★★★★★
5
(4)
SAMAN
Saman Water-Based Interior Wood Varnish - Matte - Clear - Low Odour - 472 ml
Format 472ML
Article #7264094
Model #160-005
★★★★★ ★★★★★
1
(1)
MINWAX
Varnish - Polyurethane Varnish
Format 946ML
Article #1449054
Model #305034444
★★★★★ ★★★★★
4.6
(163)
MINWAX
Polycrylic Water-Based Protective Finish - 946 mL - Satin
Format 946ML
Article #14495011
Model #321034444
★★★★★ ★★★★★
4.3
(354)
FLECTO
Varnish - "Varathane" Professional Varnish
Format 946ML
Article #80455001
Model #Y90041
★★★★★ ★★★★★
3
(2)
MINWAX
Wipe On Poly
Format 946ML
Article #1449240
Model #39103
★★★★★ ★★★★★
4.8
(40)
SAMAN
Saman Water-Based Urethane Interior Wood Varnish - Semi-Gloss - Clear - Low Odour - 3.78 L
Format 3.78L
Article #72645131
Model #160-051-4L
★★★★★ ★★★★★
0
(0)
SAMAN
Saman Interior Wood Varnish - Clear - Water-Based - Semi-Gloss Sheen - 472 ml
Format 472ML
Article #7264039
Model #160-051
★★★★★ ★★★★★
0
(0)
SAMAN
Saman Water-Based Urethane Floor Varnish - Self-Leveling - Crystal Clear - Matte - 3.78-L
Format 3.78L
Article #72645129
Model #160-005-4L
★★★★★ ★★★★★
1
(2)
SAMAN
Saman Water-Based Urethane Interior Wood Varnish - Satin - Clear - Low Odour - 3.78 L
Format 3.78L
Article #72645130
Model #160-031-4L
★★★★★ ★★★★★
0
(0)
SAMAN
Saman Water-Based Urethane Interior Wood Varnish - Satin - Clear - Low Odour - 946 ml
Format 946ML
Article #72645119
Model #160-031-1L
★★★★★ ★★★★★
5
(1)
VARATHANE
Professional Varnish
Format 3.78LT
Article #03305408
Model #248017
★★★★★ ★★★★★
0
(0)
FLECTO
Varnish - "Varathane" Professional Varnish
Format AEROSOL
Article #80455011
Model #Y110081
★★★★★ ★★★★★
3
(3)
VARATHANE
Professionhnal Varnish
Format 3.78LT
Article #03305409
Model #248016
★★★★★ ★★★★★
0
(0)
VARATHANE
946 mL Oil Base Wood Trim Varnish Flat Finish
Format 946ML
Article #03305854
Model #282564
★★★★★ ★★★★★
0
(0)
MINWAX
Varnish - Polyurethane Varnish
Format 236ML
Article #1449029
Model #310014444
★★★★★ ★★★★★
4.2
(172)
MINWAX
Urethane Satin Varnish
Format 3.78L
Article #14495284
Model #CM1322000
★★★★★ ★★★★★
0
(0)
FLECTO
Varnish - "Varathane" Professional Varnish
Format AEROSOL
Article #80455007
Model #Y100081
★★★★★ ★★★★★
0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Varnish - Polyurethane Varnish is rated 4.2 out of 5 by 250.
Rated 5 out of 5 by from My number 1 choice My first experience with Minwax products was back in 1985. I built a new primary residence and acted as general contractor. The company that finished the hardwood floors used Minwax stain and topcoated with Minwax semi-gloss polyurethane. Man did the floors look good and the durability was excellent! I have since built three new homes and renovated one. Minwax products have always been used and my number one choice for ease of application, appearance and durability. Being an avid woodworker, I also use Minwax aerosol for small projects and touch-up. Minwax and wood go together like soup and sandwich.
Date published: 2018-11-20
Rated 1 out of 5 by from Amber streaking I just finished the second 50+ year old chest of drawers for my great grandkids. Both were prepared the same way in same conditions. The first chest I used the old “clear gloss “ on brilliant white paint and result was a very attractive amber with a great shine. The second I didn’t have enough of the old gloss so I bought a gallon of the New Warm Gloss and was told it was the same formula?? Nope!! I now have amber streaks, I put on second coat hoping it would even out, just made it worse. I have used Minwax for 20 years and never had a problem, until they changed. Too Bad, looking for new supplier.
Date published: 2022-03-24
Rated 5 out of 5 by from I like it. We have used Minwax Polyurethane clear gloss, both in the rattle can and bulk, for several years. It has proven to be the easiest, most forgiving to apply and most durable of the several clear finishes we have tested. We would prefer to use a water base finish but all that we have tested, including Minwax Polycrylic, do not come close to this product as far as a hard, durable finish is concerned. We have never had any problems with this finish. To the gentleman who complained of the product not drying; I have observed that this, and many other solvent based finishes dry VERY slowly if the humidity is high or if the finished object is sitting in the direct sunlight. Provide a little shade and the finish dries quickly. Just a thought. Sorry you had problems.
Date published: 2011-04-26
Rated 5 out of 5 by from Polyurethane (Clear Gloss) Great product. Read the instructions, though. Do not shake, only stir, but not a whipping stir, because you'll get air bubbles if you shake or vigorously stir. Rather than using a paint brush, or the like, I cut off a piece of a 1/2" nap paint roller and used that to apply, using smooth strokes to apply evenly, and it gave a very nice, even, smooth finish. Also, per the instructions, apply a light coat, then lightly sand with the 220 grit sandpaper, then a second coat. Of course, you'll need to use a fresh piece of the nap paint roller if you use my method. It doesn't take but a small piece. If you feel you need a third or fourth coat, then the same process between each coat. Try it, you'll like it...
Date published: 2018-02-01
Rated 5 out of 5 by from Love The Spray I have been a long time user of all Minwax products. The stains, polyurethanes,including Polycrylic and wipe on poly. I started using the spray polyurethane on several small projects a few years ago and I absolutely love it. If you follow the instructions and do several light coats 2 hours apart, it will give you a professional looking finish on all wooden surfaces. I've used the satin, semi gloss and the gloss. I haven't been disappointed yet. I love the way the spray nozzle turns to spray horizontally and vertically. I have had no problems with the nozzle clogging, even after storing cans for several months. I am a fan of all Minwax products and I plan on using them for many years to come.
Date published: 2018-11-07
Rated 5 out of 5 by from Great i just recently repainted my guitar to a natural finish and desided to apply this poly to finish it off and a few hours after applying the surface was very rough due to my lack of skill useing the product but after it dried the surface leveled itself out and looks like it was profesionaly done. great product! the only thing is you cant see where you havfe and havent applyed it when you are working on the second and third coats.
Date published: 2011-01-03
Rated 1 out of 5 by from Poor Finish Attributes I should have known, this product is not good. I started using a penetrating stain on red oak, let it dry for a few days then came back to put this on, what a mistake! The first layer, not sure what was going on but pulled the stain out of the wood and wouldn't dry. I lightly sanded 220 to knock any high spots off, then decided to charge forward and finish a second coat. I could tell, right away, it wasn't going to end up good. Alligatoring of the original coat, almost dilsolving it and making it run after 24 hours of dry time. This is the last time I use a Minwax product, they're terrible. Ruined my project, not I'm not sure what to do to rectify the finish. The wipe-on poly is the only finish worth a cent.
Date published: 2020-03-30
Rated 5 out of 5 by from great product! Was a great finishing look on the wood!
Date published: 2016-01-04
  • y_2023, m_5, d_30, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_250
  • loc_en_CA, sid_1449071, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 6ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store