Winter Cab for Garden Tractor - Black

Article#30735031 Model#L700423
Winter Cab for Garden Tractor - Black
 

Description

Snow removal has never been easier and more delightful with this Berco cabin which is designed to protect you from harsh winter conditions. This piece of equipment is easy to install and is equipped with air vents that prevent carbon monoxide accumulation within the cab. Large windows around the cabin ensure good visibility during snow removal. Finally, the hook and loop openings give you access under the hood or to the gas tank.

You may also like

MTD GENUINE PARTS
MTD 42-in Replacement Lawn Tractor Deck Drive Belt
Article #330064347
Model #OEM-754-0371A
★★★★★ ★★★★★
0
(0)
MTD GENUINE PARTS
MTD Genuine Parts 46-in Replacement Lawn Tractor Deck Drive Belt
Article #330064348
Model #OEM-754-0349
★★★★★ ★★★★★
0
(0)
Lawn Tractor Rear Mounted Weight Kit - 60 lb
Article #80495147
Model #490-900-M060
★★★★★ ★★★★★
0
(0)
ATLAS
Handle Hardware Kit - 4 Pieces
Article #80495117
Model #AT-0054
★★★★★ ★★★★★
0
(0)
MTD GENUINE PARTS
MTD 38-in Replacement Lawn Tractor Deck Drive Belt
Article #330064349
Model #OEM-754-0329A
★★★★★ ★★★★★
0
(0)
MTD
MTD 32-in/38-in/42-in/44-in Lawn Tractor Transmission Drive Belt
Article #330064295
Model #OEM-754-0281
★★★★★ ★★★★★
0
(0)
JOHN DEERE
4-Cycle Engine Paper Air Filter - 17 HP
Article #30736012
Model #GY21435
★★★★★ ★★★★★
4.6
(28)
Universal 6-in-1 Walk-Behind Lawn Mower Blade - 19"-20"
Format 19"-20"
Article #02225252
Model #490-100-B064
★★★★★ ★★★★★
0
(0)
LASER
Small Engine Spark Plug
Article #0819190
Model #42504
★★★★★ ★★★★★
0
(0)
ATLAS
Universal Walk-Behind Lawn Mower Blade - 22"
Format 22"
Article #02225262
Model #490-100-B016
★★★★★ ★★★★★
0
(0)
MTD
MTD 0.5-in x 37.5-in Replacement Wheel Drive Belt
Article #330064296
Model #PX-408010
★★★★★ ★★★★★
0
(0)
HUSQVARNA
Courage 4-Cycle Engine Air Filter and Pre-Cleaner
Format 1.75"x9.50"x11.25"
Article #82305273
Model #OEM197663
★★★★★ ★★★★★
0
(0)
HUSQVARNA
Riding Lawn Mower Replacement Deck Belt - 48"
Format 48"
Article #82305279
Model #581695901
★★★★★ ★★★★★
4.6
(10)
HUSQVARNA
Premium Bagging Riding Lawn Mower Blade - 42" - 2-Pack
Format 42"
Article #82305247
Model #HU22004
★★★★★ ★★★★★
3.7
(3)
Universal 3-in-1 Walk-Behind Lawn Mower Blade - 22"
Format 22"
Article #02225271
Model #490-100-B059
★★★★★ ★★★★★
0
(0)
JOHN DEERE
John Deere Riding Mower Mulch Kit - 42" Decks
Format 42"
Article #30735951
Model #GY00115
★★★★★ ★★★★★
4.1
(99)

Technical specifications

Component :Polyester and PVC Type :Tractor accessory Model :Garden tractor Color :Black Height :Front: 55 1/4" (140.34 cm), rear: 45 1/2" (115.57 cm) Width :40" (101.6 cm) Length :45 1/2" (115.57 cm) Weight :35 lb (15.88 kg)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Winter Cab for Garden Tractor - Black is rated 4.6 out of 5 by 9.
Rated 3 out of 5 by from Universal fit - not bad, functional First, allow me to say that for this price point, it's a fair value. The hardest part to this is mounting to your tractor. There are 3 spots where the mounting bars need to installed: 1. Rear hitch area 2. Front left foot rest area 3. Front right foot rest area You need to think about how you'll attach to the foot rest area. The instructions are incomplete - if you're not mechanically inclined, you may want to pay to have this installed. The instructions show drilling holes into the foot rests. In my application - John Deere X585 I mounted the front foot rest brackets to a cross member underneath the actual foot rest - I had to drill one hole and used an existing hole in the cross member. Also, I had to remove the rear trailer receiver to install their mounting plate - that means I cannot tow implements with this on - not a problem for me, but beware. I do have a 3pt hitch with Rear PTO - I was able to mount the rear plate but needed to be careful of the draft arms hitting the snow cab's mounting posts - I adjusted the sway chains to make sure this wasn't an issue. When I first looked at it though, I thought I'd have to return the cab. The canopy is a one piece item with zippers and straps galore. It's fairly cheap. I don't see getting more than 2 - 3 winters out of it but at this price point, it's disposable I suppose. One other item of note, the canopy rubs against my rear tires on both sides (due to the length of the canopy) . So there is an adjustment to make there. All in all, this is an OK purchase - I wasn't willing to part with $2500-$3000 for a real cab. I would say that if you need durability for years to come, save up for the expensive cab - but if you're ok with a product that will protect you from the elements for a couple years, this this cab will fit the bill.
Date published: 2014-10-05
Rated 5 out of 5 by from have had for over five years now I purchased this for the obvious reason, it has served me well and still holding up well. good manufacturing of side windows and cab fabric, I find it keeps me slightly warmer due to the fact it overlaps the engine hood, hence, warm motor warmer rider. if taken care of properly it will last many years as mind has and still going strong. highly recommend!
Date published: 2018-01-11
Rated 5 out of 5 by from A must have creature comfort !!! Bought mine from Lowes three years ago. The picture on the lowes site shows a long discontinued version. The version I have and is still the current improved version has on the sides and back clear vynil from the top as shown all the way to the bottom foot rests and now gives the driver a better feeling of not being so couped in and better side -ground vision. the frame is made in Canada and the fabric/vynil top is made in China. The sides have full length zippers at front and rear. This permits you to roll up the sides and tie them up and ride it open sided in warmer weather and your bundled up and feeling to hot with sides down. ( Has this capability on both sides). Only problem is leveling both sides of front cab supports, they supply two of each size spacers, 1/2 inch and 1 inch, problem with this system is that the supports can be at any various height on either side from garage floor, my solution: from hardware store or Lowes hardware, obtain 2, 1/2 inch collets with set screws(they are just called collets) these can be set at any height on the support rods as they 1/2 inch in diameter( paint on rods may obstruct fit, may have to either with round file, file inner hole to slide over paint or even faster, place end that collet wound go onto top of vice open just a bit smaller gap than diameter of rod and with flat file trim down full length of the shorter upright of the rod support as this is where the collet and support tube would slide onto. As you file away turn long end of rod in a circle to file around the rod evenenly and stopping to test slide collet until slips on and off freely. Once done your ready set all up on tractor and you will be able as per instructions set both front canopy support tubes to the same height on both sides exactly per your tape measure to match the height of the rear tubes that are supported more firmly and do not need this done as the mounts tend to be matched evenly due to mounting system. Optional: after filing for collet fit you may want to repaint filed rod, so make sure collet wiggles a bit extra for adding paint back on, I repainted mine, lowes carries Black gloss/primer paint combination made by Rust o Leum, Let it dry and cure for a few days, I leave mine for a week to cure. But as this collet only high pressure point will be the set screw against the rod, 24 hours may be OK. The tube sliding on and off will wear paint off over the years, totally unavoidable, always can hold a square of card board and spray around it any time without removing it from tractor. No need to remove support rods, can be left in place year round to save time. I do remove my rear rods as they can be replaced quickly.
Date published: 2016-01-06
Rated 5 out of 5 by from this was a great purchase, keeps me warm and dry I was surprised to see Lowes had this cab available. I had been looking for one of these for some time. The cab fit perfect with no modifications.
Date published: 2014-01-05
Rated 5 out of 5 by from Berco Snow Cab This cab is working great for my Dad. It captures the engine heat, so that is a plus during snow storms. It took us about 2 hours to install. However, some of the nuts and bolts were mismatched in the box.
Date published: 2018-01-12
Rated 5 out of 5 by from Great Cab for the money If your looking for a cab for your lawn tractor look no further. Plenty of room inside to move around an good visiblity. And only took 2 hrs to put on.
Date published: 2012-01-02
Rated 4 out of 5 by from Good quality I purchased the cab approximately 2 weeks ago and so far so good. I had no problem putting it to together by myself except my wife helped me put the canopy over top of the frame. I've only used it once but I didn't have any blind spots and everything was easy to see. I really like it up until now and I'm not expecting that to change.
Date published: 2019-02-08
Rated 5 out of 5 by from Should have purchased one of these cabs long ago For years, I've often looked like a snowman after blowing snow. With the Berco Cab I finish the way I started after sitting high and dry inside the cab. After making a couple of adjustments during the installation process, away I went. I'd recommend this product to anybody, it works great.
Date published: 2019-02-28
  • y_2019, m_7, d_14, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_CA, sid_30735031, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_renodepot
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

Changing store

You are about to change your selected store.

Please note that if you change stores, prices and availability shown on the website may vary and your shopping cart will empty.

Keep my store Change store